Results 1 to 7 of 7

Thread: Overclocking guide

  1. #1
    harleyman
    Guest

    Overclocking guide

    I have avaible a new overclocking guide hand written by txnetcop.......From the origional Author Graysky..... ( updated and corrected by txnetcop)


    Everything you ever wanted to know about OVERCLOCKING GUIDE FOR CORE2DUO and CORE2QUADs

    Its large and you need to PM me with your E-Mail address and I will send it to you

    Much Thanks To Ted For This....

  2. #2
    harleyman
    Guest
    And For All You Power Heads....An Explanition About Ram Timings


    http://www.tweakers.fr/timings.html

  3. #3
    Charter Member 2014
    Join Date
    Nov 2007
    Location
    off the shoulder of Orion
    Posts
    4,019
    A very useful link here too.......... http://www.sim-outhouse.com/sohforum...ad.php?t=11983 :ernae:

    Fantastic Kilo Delta.........Thanks for this link....Hope you don't mind me dropping this in here....Harleyman Great job Mo......Many thanks from us all....
    I fly because it releases my mind from the tyranny of petty things — Antoine de Saint-Exupéry

  4. #4

    Question

    Hi I've just requested guide.

    Using Prime95

    I can get my @9550 to run in Windows @ 4.0 GHz, but Crash Core 2 at 10 minutes so I've decided to run @ 3.8 GHz.
    Core 2 stops after 2 1/2 hours and Core 1 stops at 8 hours. I haven't run longer than that.
    Below are my settings.

    3.8 ghz -

    JumperFree Configuration Settings:

    AI Overclock tuner: Manual
    CPU Ratio Setting: 8.5
    FSB Strap to North Bridge: auto
    FSB Frequency: 450
    PCI-E Frequency: 101
    DRAM Frequency: 969
    DRAM CLK Skew on Channel A1: AUTO
    DRAM CLK Skew on Channel A2: AUTO
    DRAM CLK Skew on Channel B1: AUTO
    DRAM CLK Skew on Channel B2: AUTO
    DRAM Timing Control: Manual

    1st Information :

    CAS# Latency: 5
    DRAM RAS# to CAS# Delay: 5
    DRAM RAS# Precharge: 5
    DRAM RAS# Activate to Precharge: 15
    RAS# to RAS# Delay : AUTO
    Row Refresh Cycle Time: auto
    Write Recovery Time: AUTO
    Read to Precharge Time: AUTO

    2nd Information :

    READ to WRITE Delay (S/D): AUTO
    Write to Read Delay (S): AUTO
    WRITE to READ Delay (D): AUTO
    READ to READ Delay (S): AUTO
    READ to READ Delay (D): AUTO
    WRITE to WRITE Delay (S): AUTO
    WRITE to WRITE Delay (D): AUTO

    3rd Information :

    WRITE to PRE Delay: AUTO
    READ to PRE Delay: AUTO
    PRE to PRE Delay: AUTO
    ALL PRE to ACT Delay: AUTO
    ALL PRE to REF Delay: AUTO
    DRAM Static Read Control: Disabled
    DRAM Read Training: Disabled
    MEM. OC Charger: Auto
    AI Clock Twister: Auto
    AI Transaction Booster: Auto

    CPU Voltage: 1.2625
    CPU GTL Voltage Reference (0/2): AUTO
    CPU PLL Voltage:
    FSB Termination Voltage: 1.24
    DRAM Voltage: 2.08
    NB Voltage: 1.26
    NB GTL Reference: AUTO
    SBridge Voltage: 1.2
    PCIE SATA Voltage: 1.50

    Load Line Calibration: Enabled
    CPU Spread Spectrum: Disabled
    PCIE Spread Spectrum: Disabled
    CPU Clock Skew : Auto
    NB Clock Skew : Auto
    Cpu margin enhancement : OPTIMIZED

    Advance CPU Settings
    CPU Ratio Setting: 8.5
    C1E Suppport: Disabled
    Max CPUID Value Limitff
    Intel® Virtualization Tech: on
    CPU TM Function: ENABLED
    Execute Disable Bit: ENABLED

    All cores don't exceed 55 C

    Thanks

    Ben
    SYSTEM: Windows 7 Ultimate 64bit |PSU - CoolMaster 1000Watt Gold edition |MoBo - Asus Sabertooth X79 |CPU - Intel i7 3930K OC (4.6 GHz) |Display - ATI Gigabyte 7970 HD |3X4GB G.Skill |Controls - TM HOTAS WARTHOG (Serial No. 4523) Saitek Rudder Pedals |TrackIR 4 Pro

  5. #5
    You might want to play with the voltages a bit more since you are experiencing crashes. Granted, 3.8 GHz from a 2.83 GHz CPU is a hell of a good overclock, but others have done the same and with 24 hour stability.
    My computer:Win XP 32 Home SP3, Q9650 @ 3.8 GHz, 4GB DDR2-800 RAM @ 845, Zotac Nv 8800GT-OC. Jul. 21,2011

  6. #6

    Update

    Okay here is an update.

    Messed around with a lot of settings with no real improvement until I set everything as stated above, but changed only one setting

    DRAM Frequency: 969 I now have at DRAM Frequency: 1096.

    Core 2 now ran though(10 Hours), but core 1 still stopped at 8 hours.

    Man this takes a long time to test!

    What's considded a stable OC?

    Ben
    SYSTEM: Windows 7 Ultimate 64bit |PSU - CoolMaster 1000Watt Gold edition |MoBo - Asus Sabertooth X79 |CPU - Intel i7 3930K OC (4.6 GHz) |Display - ATI Gigabyte 7970 HD |3X4GB G.Skill |Controls - TM HOTAS WARTHOG (Serial No. 4523) Saitek Rudder Pedals |TrackIR 4 Pro

  7. #7
    Depends upon your standards. For me, at least 12 hours. I think 24 hours is pretty much the gold standard.
    My computer:Win XP 32 Home SP3, Q9650 @ 3.8 GHz, 4GB DDR2-800 RAM @ 845, Zotac Nv 8800GT-OC. Jul. 21,2011

Similar Threads

  1. Overclocking Tip for begginers
    By Python231 in forum FSX General Discussion
    Replies: 5
    Last Post: May 15th, 2013, 00:56
  2. Is overclocking really necessary?
    By Python231 in forum FSX General Discussion
    Replies: 12
    Last Post: April 27th, 2013, 05:31
  3. Overclocking....still wary of attempting it....
    By Navy Chief in forum FSX General Discussion
    Replies: 30
    Last Post: November 18th, 2010, 09:43
  4. Overclocking Help
    By peter12213 in forum FSX Tweaks
    Replies: 8
    Last Post: October 2nd, 2010, 00:26
  5. In need of some overclocking advice please
    By OleBoy in forum FSX Tweaks
    Replies: 31
    Last Post: February 21st, 2010, 12:35

Members who have read this thread: 24

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •