Please Support the SOH "2023 Charter Membership Drive"
All online donations at this time are through PayPal
Snailmail donations can still be sent, see this thread
Please log in before making your donation.
The SOH Flight Center's Teamspeak 3 server has moved to sim-outhouse.com
To connect to the TeamSpeak Server you will need the TeamSpeak3 client. Located here TeamSpeak Downloads
TeamSpeak3 client will advise you when a newer release is required.
If you have TS2 installed don't worry they are completely independent of each other. In fact you can run both at the same time connected to two different serves with no problems. You can not connect a TeamSpeak2 client to a TeamSpeak3 server as well as the other way around.
The TS3 connection address is one of the following:
sim-outhouse.com
sim-outhouse.net
72.233.76.234
The default port is 9987. You should not need to forward ports for TS3. You will need to check your firewall to make sure it is allowing you to connect if you are having problems.
At this point and moving forward there is no password on the server.
We have created many rooms for different simulators.
Always use your www.sim-outhouse.com user name in the TS Client.
When you join you will be a Guest and a Guest has almost no privileges by using your SOH user name we will be able to promote users to the SOH FC Members User Group.
The SOH FC Members User Group can send text messages to clients/channels, upload files, down load files (be careful you do not have delete power and it is logged for accountability) and finally you can create Temporary channels in the event you want to use another room for a special event.
We have a NPL so we can connect 512 users.
The hope is to provide the flightsim community with the best TeamSpeak server out there.
We charge nothing for the use of the TeamSpeak Server and nothing will ever be charged for its use. Just like the forums this is provided for the members by the members.
It is not a rules free server. You are required to follow the same rules that you agreed to when you signed up at the forums.
I have it installed for some time and cannot get it to boot. Running Windows 10 . How do I set compatability mode?
What else shoukd I look for?
A new entry has been added to Add-Ons Library, category FS 2004 Military skins - Cold War
Description: Five skins for Allen's Piper
A new entry has been added to Add-Ons Library, category FSX Civilian Helicopters
Description: Well, here it is folks... My converted
A new entry has been added to Add-Ons Library, category FSX Ships
Description: FSX/Accel Pilotable Prewar Battleship BB-48 USS
A new entry has been added to Add-Ons Library, category FSX Military skins - Cold War
Description: This is a repaint of the **Milviz
OK, got my Stukas to roll over and dive straight down on their stationary targets(s) from 10,000 Ft (awesome site by the way). But after hitting the targets
Last Post By: Deathwind Today, 17:34Calling the scenery gurus...
Can it be done?(Fs98 scenery into Fs2004 that is)
Will it perform as expected?
What
A new entry has been added to Add-Ons Library, category FSX Civilian Helicopters
Description: Well, here it is folks... My converted
La direction de tir low angle est absente sur la passerelle des croiseurs Didos 1942 alors qu'elle devrait etre présente comme pour les croiseurs HMS
Last Post By: dombral Yesterday, 05:01
A new entry has been added to Add-Ons Library, category FS 2004 Military skins - World War II
Description: Piper L-4 / NE-2 WW2
Welcome to 2023
It is that time of year again where we ask you to support the site for another year.
Last year I under estimated the total amount we would need for the year. I had forgotten to account for the cPanel costs. Luckily we still had funds left over from the year before.
Although at this point I do not have the bill for the server I estimate it will be the same as last year.
Although we tried our best a couple of times last year, we never broke the bandwidth limit for the month. There were a couple of days we killed the daily allotment but those days balanced themselves out.
Here’s to a new year.
The Staff
What's New...
What's Hot...
Thank you, and you are most welcome.
Thank you Huub. You are most probably correct about the material properties but i wanted
Thế AI thinks they are buzzards that’s why they circle waiting for the target to die.
Deathwind Today, 17:34For a good representation of the battle, wouldn't have it any other way! Can't wait to fly these missions and put the parachute to work.
scoobyman32 Today, 15:56Skylane
I've never seen them circle the target unless they sometimes try to dogfight with the attacking fighters. Maybe you have those listed
Let's start with your OS.
If you're running the 64 bit version of Win10, you should consider installing FS9 directly to your main drive (ie, C:/
Never mind. I D/L the NO Cd and it works now. Thanks for the help.
Now I have to start all over its been so long. I need to D/L lots of scenery
There is a good How-to thread in the Tweaks section here, helped me get things up and running, Motormouse's post at the bottom of the page was especially
AndyG43 Today, 14:48I installed the fs9 update and found my fs 9 disk 4 , but still will not boot
! ?
Interesting to learn that the no CD patch is no longer required. I have it because it was there on my old rig that I just ported into the new one.
Mick Today, 14:22If you haven't noticed already, when you put that skin on wheels the bottom of the gear legs are black or dark OD and the hubcaps don't match the white
Mick Today, 14:16Anyone point me in the right direction? I'm doing a complete rebuild of my CFS2 Europe install.
ie_ensign_raf and ie_watch_office.
Maybe take 1101 out of the Hellcat, Dautless etc. air file and replace the Stuka 1101 with it and see what that gives you.
Deathwind Today, 13:56
Need help finding:
Thread Starter: stoneyAnyone point me in the right direction? I'm doing a complete rebuild of my CFS2 Europe install.
Last Post By: stoney Today, 14:01ie_ensign_raf and ie_watch_office.