HMS Bounty Work Boat - The Launch - Page 3
Page 3 of 7 FirstFirst 1234567 LastLast
Results 51 to 75 of 171

Thread: HMS Bounty Work Boat - The Launch

  1. #51
    Quote Originally Posted by speedy70 View Post
    C'mon Nigel.I had my sandwiches all ready for my epic voyage in the launch and now they have all curled up at the edges.

    Cheers Chris
    LOL Chris.

    But, there's a time for work and a time for play. Nigel has been working on his "Winter Stores" build-up. As temps get cooler on the farm, progress will be faster.

    By the way, those sandwiches will look pretty good after 6-7 days with no food on that epic journey. :-)
    Milton Shupe
    FS9/FSX Modeler Hack

    My Uploads at SOH - Here
    Video Tutorials - Gmax for Beginners

  2. #52
    Members +
    Join Date
    Apr 2013
    Location
    Cape Town, South Africa
    Age
    71
    Posts
    1,297
    The launch of the launch?

    (REALLY dry mouldy sandwiches now, & the grog supply getting very low!)

  3. #53
    I've had no updates since September 27th as follows:

    "Bounty Launch is progressing steadily, along with texturing out the AVRO - as always, the cooler the weather becomes, the speedier we'll make headway. Would like to have the Launch pretty well in the wrapper by end of October ... "

    As I mentioned earlier, Nigel is busy on the farm with seasonal harvest and getting in Winter vegetables.
    Milton Shupe
    FS9/FSX Modeler Hack

    My Uploads at SOH - Here
    Video Tutorials - Gmax for Beginners

  4. #54
    Quote Originally Posted by Milton Shupe View Post
    By the way, those sandwiches will look pretty good after 6-7 days with no food on that epic journey. :-)
    Wasn't it the custom in those days, to take along a chubby cabin-boy or two, in case the sandwiches didn't keep ?

  5. #55

    Compass Box


  6. #56
    Did you have a point to make or a question to ask Seahawk?
    Milton Shupe
    FS9/FSX Modeler Hack

    My Uploads at SOH - Here
    Video Tutorials - Gmax for Beginners

  7. #57
    No question, just enjoying a day on the water...

  8. #58

    A Question

    I'm trying to change the colors for the display readouts and not having any luck.
    I thought #176 was the value to changem but I'm missing something
    A new color value I need to add..?

    <!-- Heading -->

    <Element>
    <Position X="330" Y="83"/>
    <Text X="118" Y="25" Length="15" Font="Arial" Color="#FFB81C" Adjust="Left">
    <String>Heading:</String>
    </Text>
    </Element>
    <Element>
    <Position X="450" Y="83"/>
    <Text X="130" Y="25" Length="15" Font="Arial" Color="#FFB81C" Adjust="Left">
    <String>%((A:PLANE HEADING DEGREES MAGNETIC,degree))%!03d!&#176; Mag</String>
    </Text>
    </Element>

  9. #59
    Quote Originally Posted by Seahawk72s View Post
    I'm trying to change the colors for the display readouts and not having any luck.
    I thought #176 was the value to changem but I'm missing something
    A new color value I need to add..?




    There are two text strings in each set (Label then Variable), each having a "Color=" value in hexadecimal.

    That is what you need to change.

    <Text X="118" Y="25" Length="15" Font="Arial" Color="#000000" Adjust="Left">
    Milton Shupe
    FS9/FSX Modeler Hack

    My Uploads at SOH - Here
    Video Tutorials - Gmax for Beginners

  10. #60
    Quote Originally Posted by Milton Shupe View Post
    There are two text strings in each set (Label then Variable), each having a "Color=" value in hexadecimal.

    That is what you need to change.

    <Text X="118" Y="25" Length="15" Font="Arial" Color="#000000" Adjust="Left">
    You'll see from my code tha is what I thought as well>
    What am I muissing..? The readouts stayed black.

    Code:
    <!-- Heading -->
       
       <Element>
         <Position X="330" Y="83"/>
         <Text X="118" Y="25" Length="15" Font="Arial" Color="#FFB81C" Adjust="Left">
           <String>Heading:</String>
         </Text>
       </Element>
       <Element>
         <Position X="450" Y="83"/>
         <Text X="130" Y="25" Length="15" Font="Arial" Color="#FFB81C" Adjust="Left">
           <String>%((A:PLANE HEADING DEGREES MAGNETIC,degree))%!03d!° Mag</String>
         </Text>
       </Element>

  11. #61
    SH,

    Hmmm, it worked for me.

    Are you certain you saved your changes properly.

    If you used Notepad to edit, you must use "SAVE", not "SAVE AS".

    Double check your folder to ensure the XML version of the gauge has been changed.
    Milton Shupe
    FS9/FSX Modeler Hack

    My Uploads at SOH - Here
    Video Tutorials - Gmax for Beginners

  12. #62
    Quote Originally Posted by Milton Shupe View Post
    SH,

    Hmmm, it worked for me.

    Are you certain you saved your changes properly.

    If you used Notepad to edit, you must use "SAVE", not "SAVE AS".

    Double check your folder to ensure the XML version of the gauge has been changed.

    The snap of the compass box shows the new lettering color.
    I'll recheck the code and try different colors...

  13. #63
    Quote Originally Posted by Seahawk72s View Post
    The snap of the compass box shows the new lettering color.
    I'll recheck the code and try different colors...


    Found it, a mistake in the panel.cfg.

  14. #64
    Quote Originally Posted by Seahawk72s View Post
    Found it, a mistake in the panel.cfg.
    Ah, something we all do my friend. Charge on
    Milton Shupe
    FS9/FSX Modeler Hack

    My Uploads at SOH - Here
    Video Tutorials - Gmax for Beginners

  15. #65

    Spring

    Spring is in the air.
    All supplies look to be ready....

  16. #66
    Well it's alright for you ,I have had to throw my sandwiches out .They were off ugh!!!

    Nigel We are out of sandwiches and rum!!!! oh and boatless.

    Cheers Chris

  17. #67
    Quote Originally Posted by speedy70 View Post
    Well it's alright for you ,I have had to throw my sandwiches out .They were off ugh!!!

    Nigel We are out of sandwiches and rum!!!! oh and boatless.

    Cheers Chris
    Boatless??? Get back in the Bounty, or get some "waders" on. :-)

    I looked last night to see if I had the early version around to share but, alas, no where to be found in FS9 or FSX, and I scrapped a lot of early gmax in all my projects to free up about 20 gigabytes, so it is not recoverable.

    But, I do have a screenshot :-)
    Attached Thumbnails Attached Thumbnails HOMEUNIT-2016-aug-6-003.jpg  
    Milton Shupe
    FS9/FSX Modeler Hack

    My Uploads at SOH - Here
    Video Tutorials - Gmax for Beginners

  18. #68
    Yes well I spose we will have to carry on waiting.They say it's a virtue but i'm not sure.

    Not blaming you Milton, we are all in the same boat(Pun intended)

    Cheers chris

  19. #69
    Charter Member 2012 nigel richards's Avatar
    Join Date
    Jan 2009
    Location
    Greece
    Age
    66
    Posts
    2,498
    Blog Entries
    2
    SHHHHHHhhhhh!!!

    ...I'm busy!



    Attached Thumbnails Attached Thumbnails 348918.jpg  
    Most men often say what they think!
    An honest man usually means what he says!
    A gentleman always says what he means!

    "Αίεν Υψικρατείν "

    A fool is not he who asks a simple question, but he who would simply have its asking denied. (Richards 2012)

  20. #70
    We therefore commit his body to the deep,
    looking for the general Resurrection in the last day,
    and the life of the world to come,

  21. #71
    Charter Member 2012 nigel richards's Avatar
    Join Date
    Jan 2009
    Location
    Greece
    Age
    66
    Posts
    2,498
    Blog Entries
    2
    Quote Originally Posted by Seahawk72s View Post
    We therefore commit his body to the deep,
    looking for the general Resurrection in the last day,
    and the life of the world to come,
    Blasphemy!

    Mutiny!!!
    Most men often say what they think!
    An honest man usually means what he says!
    A gentleman always says what he means!

    "Αίεν Υψικρατείν "

    A fool is not he who asks a simple question, but he who would simply have its asking denied. (Richards 2012)

  22. #72
    Charter Member 2012 nigel richards's Avatar
    Join Date
    Jan 2009
    Location
    Greece
    Age
    66
    Posts
    2,498
    Blog Entries
    2
    Anyway, where were we?...

    Ah yes, as we were saying; Now that we have the AVRO Project almost wrapped up (still need to convert the models to Aborigine FSX), we'll be moving on to complete the much overdue Bounty scenery package and Launch.

    We're now working on an authentic location which is an enormous help as regards to what needs to be done.

    Having said that, there's still massive scope to use our imagination and creativity.







    We've temporarily placed photoreal textures over the area to accurately trace out where we'll be adjusting the coastline and waterclass for authenticity.
    Attached Thumbnails Attached Thumbnails -2017-apr-14-004.jpg   -2017-apr-13-003.jpg   -2017-apr-14-010.jpg  
    Most men often say what they think!
    An honest man usually means what he says!
    A gentleman always says what he means!

    "Αίεν Υψικρατείν "

    A fool is not he who asks a simple question, but he who would simply have its asking denied. (Richards 2012)

  23. #73
    Charter Member 2012 nigel richards's Avatar
    Join Date
    Jan 2009
    Location
    Greece
    Age
    66
    Posts
    2,498
    Blog Entries
    2

    Yo, Ho, Ho, and a bottle of...

    'Brains' boyo?

    Attached Thumbnails Attached Thumbnails -2017-apr-15-002.jpg  
    Most men often say what they think!
    An honest man usually means what he says!
    A gentleman always says what he means!

    "Αίεν Υψικρατείν "

    A fool is not he who asks a simple question, but he who would simply have its asking denied. (Richards 2012)

  24. #74
    Quote Originally Posted by nigel richards View Post
    Having said that, there's still massive scope to use our imagination and creativity.


  25. #75
    Senior Administrator Willy's Avatar
    Join Date
    Sep 2001
    Location
    West Tennessee, near KTGC
    Age
    67
    Posts
    11,622
    Ah yes! Looking great there Nigel. If you need anything tested in FSX SE, just let me know.

    BTW, I don't know where I've been, but I've just discovered this really excellant trimotor floater that I've been have a ton of fun with it's paint kit and some "redecorating".






    I've kind of had this Louisiana thing going with it.....
    Attached Thumbnails Attached Thumbnails Flt 19-2017-apr-15-003.jpg   Flt 19-2017-apr-15-004.jpg  
    Let Being Helpful Be More Important Than Being Right.

Members who have read this thread: 0

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •