Dave, I found a smaller beacon effect and replaced the current one for the two on the spine. I also added a white strobe at the tail. As for the beacon reflection you spoke of, wouldn't the light emitted by the beacons still bounce off the exterior surfaces in RL?
For the canopy. . .technically your canopy isn't opaque, it's transparent. . .albeit not as transparent as you may want it so I'm playing with the alpha channel for that texture to see what looks better.
USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d
Current System Specs:
FSX/Accel | Windows10 64bit
Motherboard: MSI760GM-E51(MS-7596)
CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
GPU: NVidia GTX 970 (4GB GDDR5)
USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d
Current System Specs:
FSX/Accel | Windows10 64bit
Motherboard: MSI760GM-E51(MS-7596)
CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
GPU: NVidia GTX 970 (4GB GDDR5)
In P3Dv5.1 -- the canopy glass is a lot better, and so are the lights.
Dave
Thanks for doing this, Ed! Looks like I'll need to dust off P3D!
Now, the important part: Is there a Hot Shots livery? ;-)
USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d
Current System Specs:
FSX/Accel | Windows10 64bit
Motherboard: MSI760GM-E51(MS-7596)
CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
GPU: NVidia GTX 970 (4GB GDDR5)
I did give this a try and most of it works, however the coolest thing about the livery is how they painted the slipper tanks to look like Gattling Guns, lol. . . .but because of the way those tanks are mapped I was only able to get two ports on top, two on the bottom and none to fill in the spot on either side. . .too bad cause it would have looked great.
USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d
Current System Specs:
FSX/Accel | Windows10 64bit
Motherboard: MSI760GM-E51(MS-7596)
CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
GPU: NVidia GTX 970 (4GB GDDR5)
Down to checking each of the liveries, gathering the gauges and effects that will go with them, double checking the readme to be sure credits and info have been updated and adding a few decals to the Red Arrow livery I missed. I hope that by tomorrow evening I can have it uploaded to the SOH Warbirds Library.
USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d
Current System Specs:
FSX/Accel | Windows10 64bit
Motherboard: MSI760GM-E51(MS-7596)
CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
GPU: NVidia GTX 970 (4GB GDDR5)
The package has been uploaded!
USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d
Current System Specs:
FSX/Accel | Windows10 64bit
Motherboard: MSI760GM-E51(MS-7596)
CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
GPU: NVidia GTX 970 (4GB GDDR5)
Great job a real blast - cheap thrills! Long overdue and to have this little pocket rocket in the sim is just wonderful. This is in P3DV5.1
Nice shot. I don't have P3D so I wasn't able to test. I knew it would be fine in earlier versions but nice to see it makes it into V5 as well.
USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d
Current System Specs:
FSX/Accel | Windows10 64bit
Motherboard: MSI760GM-E51(MS-7596)
CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
GPU: NVidia GTX 970 (4GB GDDR5)
I have it. Thank you very much. A bit of a lively bird, just as I remember my wife used to be.
USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d
Current System Specs:
FSX/Accel | Windows10 64bit
Motherboard: MSI760GM-E51(MS-7596)
CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
GPU: NVidia GTX 970 (4GB GDDR5)
Seems as if the cockpit cover on top of the display modules is missing. The reason why you can see the background is that normally inside surfaces which are not shown are deleted for better performance.
Is the cover missing, you can see through the surface.
Not sure if this is an issue of the conversion.
Best regards, Manfred.
Bookmarks