water takeoffs in Malaya Bomber missions
Results 1 to 12 of 12

Thread: water takeoffs in Malaya Bomber missions

  1. #1
    SOH-CM-2023
    Join Date
    Feb 2009
    Location
    Baytown, Texas
    Age
    79
    Posts
    282
    Blog Entries
    4

    water takeoffs in Malaya Bomber missions

    Skylane and others.

    The vn pby will not take off from the water. I tried the black cat but it sinks. The Donier floas and works OK. However, both explode when I load up the first mission in Malaya Bomber Missions. Several years back I had a simular problem with Bataan1942, but I cannot remember if the fix was in aircraft, air, or dp file. Does anyone have a solution?


    Braveheart

  2. #2
    Which "BlackCat" did you try? The one from Simviation pg 71 worked well for me but you need to start it in the air in MB and then hand edit the .mis file to zero alt and zero speed to get it to take off. That way the wheels will already be up and it won't sink. Also, make your second waypoint a few (3-4) miles away from the start and the route over water. Wingmen will have in the air spacing in the formation you chose, not on the ground spacing, so make sure you're far enough away from shore at start.

    Cheers:

    SW
    "De Oppresso Liber"

  3. #3
    Here's some pics of PBY's takingoff fromm the water in mt Aleutians campaign.


    Talon

  4. #4
    SOH-CM-2023
    Join Date
    Feb 2009
    Location
    Baytown, Texas
    Age
    79
    Posts
    282
    Blog Entries
    4

    Malaya bomber Missions

    All missions in Malaya Bomber Missions by Skylane involving the PBY explode after loading up. I try to load it up and pby explodes. Could this be a mission error?

    Braveheart

  5. #5
    SOH-CM-2022
    Join Date
    Jun 2005
    Location
    Back in the land of maple syrup
    Age
    62
    Posts
    753
    Quote Originally Posted by Talon View Post
    Here's some pics of PBY's takingoff fromm the water in mt Aleutians campaign.


    Talon
    Ok Talon, how did you do that?
    I am not in front of my game PC at the moment (in fact I never seem to be in front of my game pc lately) but my recollection is that amphibians expect to be starting on land. True seaplanes can start from a water base but amphibians will start with their wheels extended and thus sink in water.

    I have managed to get an amphibian AI to start in the air, land on water, and take off again as if they were picking up a downed aircrew but not start on water.

    Gavin

  6. #6
    Quote Originally Posted by gavinc View Post
    Ok Talon, how did you do that?
    I am not in front of my game PC at the moment (in fact I never seem to be in front of my game pc lately) but my recollection is that amphibians expect to be starting on land. True seaplanes can start from a water base but amphibians will start with their wheels extended and thus sink in water.

    I have managed to get an amphibian AI to start in the air, land on water, and take off again as if they were picking up a downed aircrew but not start on water.

    Gavin
    As I wrote above: "...you need to start it in the air in MB and then hand edit the .mis file to zero alt and zero speed to get it to take off. That way the wheels will already be up and it won't sink. Also, make your second waypoint a few (3-4) miles away from the start and the route over water. Wingmen will have in the air spacing in the formation you chose, not on the ground spacing, so make sure you're far enough away from shore at start."

    Try that.

    SW

    PS: Here are a video and a screen shot: http://s81.photobucket.com/albums/j2...inaTakeoff.mp4
    "De Oppresso Liber"

  7. #7
    Braveheart,
    sorry to hear that you have problems with my missions.
    I used the method described by Shadow Wulf in his post above to make the PBY take off from the water, and it works on my computer. I didn´t encounter any problems with the airplane exploding upon loading the mission.

    The only thing I can think of right now is, could it be caused by using a different mesh? Do you use the mesh that Xavier mentions in the readme of his scenery or something else?

    Did anyone else have similar problems with these missions?

  8. #8
    Braveheart,
    I attached a modified MIS file for the first mission (01). Please save the original somewhere and then try this one.
    let me know if it works with this one.


    Attachment 49070

  9. #9
    SOH-CM-2023
    Join Date
    Feb 2009
    Location
    Baytown, Texas
    Age
    79
    Posts
    282
    Blog Entries
    4
    Skylane

    The Attachment you sent was invalid. Please try again.

    Braveheart

  10. #10
    It should work.. Click on the attachment and then save it, thereafter unzip the folder and you should have the MIS file..

    If not, PM me your e.mail and I´ll send the file.

  11. #11
    SOH-CM-2022
    Join Date
    Jun 2005
    Location
    Back in the land of maple syrup
    Age
    62
    Posts
    753
    Quote Originally Posted by Shadow Wolf 07 View Post
    As I wrote above: "...you need to start it in the air in MB and then hand edit the .mis file to zero alt and zero speed to get it to take off. That way the wheels will already be up and it won't sink. Also, make your second waypoint a few (3-4) miles away from the start and the route over water. Wingmen will have in the air spacing in the formation you chose, not on the ground spacing, so make sure you're far enough away from shore at start."

    Try that.

    SW
    Doh :redf: - serves me right for skimming the thread and looking at the pretty pictures instead of reading the texts in detail.

    Nice trick.

    Gavin

  12. #12
    I hope it helps...
    "De Oppresso Liber"

Similar Threads

  1. RE: Russian water bomber
    By brad kaste in forum Ickie's NewsHawks
    Replies: 9
    Last Post: October 21st, 2009, 05:03

Members who have read this thread: 0

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •