Focke Wulf FW-200C series
Results 1 to 12 of 12

Thread: Focke Wulf FW-200C series

  1. #1

    Focke Wulf FW-200C series

    Focke Wulf FW-200C series

    The Focke Wulf FW 200 C series was a long-distance sea reconnaissance aircraft of the German Luftwaffe in World War II.
    world war. It was developed from the civilian version FW 200 A and B and then by the Luftwaffe
    used in different versions.

    The civilian version has been developed by Hauke ​​Keitel in a very well implemented add-on.
    he has uploaded this AddOn on FlightSim.com under the name P3D v4 Focke Wulf Fw200A2 as a file
    fw200a2-1.zip released.

    After consultation, Mr. Keitel gave permission to add this add-on and
    to release the extension under the same terms as its original specifications.
    I now have done the extension of the Luftwaffe versions as the series using the original
    FW 200 C0 to FW-200 C8, made as good and close to the original as I can. The models
    were developed and tested exclusively for P3D 4.5. Possible that you also can use in FSX and
    other P3D versions. However, I can neither check nor guarantee this.

    Please note the conditions specified in the original readme file by Mr. Hauke ​​Keitel. They
    of course are also fully valid for my extensions, since this extension is based on the
    original and this is absolutely necessary.

    The package also includes a version for AI planes. Please copy and add this to your AI aircraft directory
    . Airfields appearing in near future will use them for AI traffic.
    The supplied extension contains only the files necessary for the supplement and alone it is
    not executable.

    I hope you will enjoy these models.










    Some other version will follow in near future. Then i will upload all the models that are used in the
    "Fliegerstaffel des Führers" and some other special versions. These are nearly ready too.

    greetings
    Klaus

  2. #2








    All these models are inside the first package that is upload just now.

  3. #3
    ein sehr elegant aussehendes Flugzeug
    Intel i5-10600K 4.10 GHz 12 Core CPU
    Asus ROG Strix Z590-E Gaming LGA1200 Z590-E Motherboard
    Corsair Vengeance LPX 32GB (4 x 8GB) DDR4-3200 Memory
    Water Cooler - CORSAIR iCUE H100i RGB PRO XT
    Corsair 850W PSU
    MSI RX580 Radeon Armor 8Gb
    Windows 10 Home Premium 64
    3 x 21" Acer LED screens

  4. #4
    Some first shots of the models of package 2.

    This will be all different plane of the "Flugbereitschaft des Führers". These were the plane of the german government.
    Also inside will be some special plane so the version of Focke Wulf 200 with FuMG Rostock and the plane that evakuate the Weather station in Alexandra Land in Arktis in 1944 (Unternehmen Schatzgräber).

    Some first shot :

    FW200 CE+IB Plane of Adolf Hitler


    FW200 26+00 second (older) Plane of Adolf Hitler


    FW200 GC+SJ "Albatross" Plane of Großadmiral Karl Dönitz


    FW200 CE+IC Plane of governement

  5. #5
    FW200 VY+OD Plane with Rostock FuMG






    FW200 F8+RL Plane that did the evakuation of weather station in Alexandra-Land in the arctis (with a little scenery of that station to comer up later).

    At the beginning of September 1943, the weather observation ship Kehdingen sailed from Kiel with the crew of the weather squad "Schatzgräber"
    and a large part of the planned equipment. The journey to the place of action was via Narvik and Tromsø and, escorted by U 387, reached
    Alexandraland on 22 September. With the help of the U-boat crew, the equipment was unloaded and a weather station set up. From November 17th,
    "Schatzgräber" finally reported weather observations ("Obse") and temperatures ("Temps"). At the end of the polar night, "Schatzgräber" also
    began taking high-altitude wind measurements, which were carried out using radio balloons. Supplies were delivered by submarine (again U 387)
    or by parachute drop from a Focke-Wulf "Condor".
    On May 30, 1944, weather inspector Gerhard Wallik and naval corporal Werner Blankenburg shot a polar bear, whose meat was processed into
    minced meat by the latter – who was also the weather station cook – and eaten raw by the crew. This was due to the lack of supplies.

    After a few days, Corporal Blankenburg, who had eaten most of the tartare, was the first to fall ill with leg pain and high fever. Within
    a month, nine other members of the weather squad fell ill, except for paramedic Gerhard Hoffmann, who had not eaten the raw meat because he
    was a vegetarian.[3] The medical service at the naval command in Oslo diagnosed trichinellosis via radio remote diagnosis. The operation was
    then aborted, and an evacuation with a "Condor" was ordered immediately.

    On July 7th, Oblt. Stahnke finally started. Oblt. Stahnke decided to land the "Condor" on Alexandraland, whereupon the landing gear was
    severely damaged. On July 8, the rescue team arrived at the base of the Treasure Graves weather station and evacuated the crew.
    The spare parts required for the repairs could be parachuted to the station within a very short time, since a BV 222 (identification X4+BH)
    was transferred from Biscarrosse on the Bay of Biscay to Banak for support purposes.

    On July 11, the "Condor" landed in Trondheim, with the undercarriage repaired in a makeshift manner on Alexandraland, and with all members
    of the weather squad "Schatzdigger" on board.






    Hope you will have fun with this.

    greetings
    Klaus

  6. #6
    SOH-CM-2023 Manschy's Avatar
    Join Date
    Mar 2013
    Location
    Near Gutersloh ETUO, Germany
    Posts
    1,187
    That's an extraordinary project, Klaus. Truly an impressive addon for WW2 enthusiasts and a welcome addition to the FW-190 or Messerschmitts BF-109, not to forget the AH Heinkel which is now freeware.
    And - last but not least - a very rarely military aircraft version which now is getting alive in P3D. Well done job
    Best regards, Manfred.

  7. #7
    Hi Klaus,
    did you solve the canopy issue here? I see (on screenshhots) still no any glass effect and no frames on canopies if you look through the glass. On yours screenshots looks like this issue exists still like in oryginal model:





    On turret you have a glass effect but not on material of winshield of canopy.
    Webmaster of yoyosims.pl.

    Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

  8. #8
    It should look like this. Will control all models again.



    greetings
    Klaus

  9. #9
    Think i found the mistake.
    There are missing two textures in upload.

    Copy these to the texture folder inside.
    These are all 4 glass textures. Promt to overwright, if you be asked for.

    greetings
    Klaus
    Attached Files Attached Files

  10. #10
    Oh, thx!
    Webmaster of yoyosims.pl.

    Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

  11. #11
    2nd part upload is done.

    Have fun

    greetings
    Klaus

  12. #12
    See this:

    https://www.onet.pl/turystyka/onetpo...79f6z,07640b54

    LOL, Today I saw this article (in my Country), its you screenshot !
    Webmaster of yoyosims.pl.

    Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

Members who have read this thread: 6

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •