Recently picked up a Saitek x55 HOTAS and plugged it in and it’s perfect except one issue. The x axis is
not working on the stick. No ailerons! Any ideas? MadCatz software maybe? Other than ailerons everything works perfect.
thanks !
Recently picked up a Saitek x55 HOTAS and plugged it in and it’s perfect except one issue. The x axis is
not working on the stick. No ailerons! Any ideas? MadCatz software maybe? Other than ailerons everything works perfect.
thanks !
Fixed my issues.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
That's the fix for the X52 when the link cable between the stick and throttle goes bad. The X55 has has two seperate USB cables so doesn't need that.
It sound to me like one of the wires may have come adrift on the x axis pot. You'll probably just need to take the base off and re-solder it. There's 10 phillips head screws on the bottom, no hidden ones under the label to worry about.
As long as your careful and keep it upside down there's nothing that should come springing out at you when you open it, just make sure that the wires are all where there supposed to be when you put the base back on so they don't get pinched.
I've had mine apart a couple of times over the years and the stick is pretty easy to work on. The throttles on the other hand are a pig to work on.
Asus ROG Maximus XI Hero
i9-9900K
32Gb Corsair Vengeance Pro DDR4 3200MHz
MSI RTX 2080Ti Ventus
Corsair H115i Cooler
Corsair RM850X PSU
Phanteks Evolv X case
Asus VG32G Monitor 2560x1440
Win 10
Oculus Quest 2
Logitech G29
Saitek X56
Saitek Pro Pedals
Saitek Cessna Trim Wheel
Bookmarks