Airbus H135 - helicopter - Page 4
Page 4 of 5 FirstFirst 12345 LastLast
Results 76 to 100 of 115

Thread: Airbus H135 - helicopter

  1. #76
    SOH-CM-2019 hubbabubba's Avatar
    Join Date
    Sep 2005
    Location
    Montréal, Québec, Canada
    Age
    67
    Posts
    1,143

    V 0.93 coming

    As a teaser;



    As of now, still waiting for it.
    Torture numbers and they'll say anything.


    Hubbabubba, Touche à tout.

  2. #77

    Upgrade v0.93

    And the good stuff keeps happening.

    https://fr.flightsim.to/file/8970/ai...copter-project

    Full 0.93 changelog below:

    - Fix APCP inverted emissive button text
    - Fix doors-off text in AIRCRAFT page
    - Minor flight model tweaks around torque and power
    - Rotor brake is hidden by default (AIRCRAFT page to turn it on)
    - Speculative "replay mode" toggle added
    - Sun visor/shades will be OFF by default when starting a flight at night
    - Screen brightness will be dimmer when starting a flight at night
    - Removed unused knobs on overhead panel
    - Removed MISC page / baggage "camera"
    - Removed other pages on CAPT MFD only
    - Adjusted textures for copper on rotor mast, and door handle position against the hull
    - Cleaned up AIRCRAFT page visuals
    - Enabled AIRCRAFT page on lower MFDs (GTNs) again
    - Parts should no longer flicker when in the hangar
    - Adjust TRQ so 2x69 has more power
    - Adjust ICAO and other config designators to play more nicely with Volanta etc

  3. #78

    Pic du Midi

    If you like mountain flying.


  4. #79
    SOH-CM-2019 hubbabubba's Avatar
    Join Date
    Sep 2005
    Location
    Montréal, Québec, Canada
    Age
    67
    Posts
    1,143

    Searchlight keybinding

    I hope that this will help some (caution= LOUD!!!)

    Torture numbers and they'll say anything.


    Hubbabubba, Touche à tout.

  5. #80
    Quote Originally Posted by Seahawk72s View Post
    If you like mountain flying.

    That is one of my favorite places to fly the 135!

  6. #81
    SOH-CM-2019 hubbabubba's Avatar
    Join Date
    Sep 2005
    Location
    Montréal, Québec, Canada
    Age
    67
    Posts
    1,143
    Great views! But what about those flickering parts (winglets, bulbous nose, under-fenestron aileron, etc)? The same thing happens when you go in the hangar to choose the livery.

    And how do you get a "fixed POV" from the station? Impressive
    Torture numbers and they'll say anything.


    Hubbabubba, Touche à tout.

  7. #82
    [QUOTE=hubbabubba;1261913]Great views! But what about those flickering parts (winglets, bulbous nose, under-fenestron aileron, etc)? The same thing happens when you go in the hangar to choose the livery.

    ......[/QUOTE

    Did v0.93 not fix the hangar flickering..?

  8. #83
    SOH-CM-2019 hubbabubba's Avatar
    Join Date
    Sep 2005
    Location
    Montréal, Québec, Canada
    Age
    67
    Posts
    1,143
    [QUOTE=Seahawk72s;1261918]
    Quote Originally Posted by hubbabubba View Post
    Great views! But what about those flickering parts (winglets, bulbous nose, under-fenestron aileron, etc)? The same thing happens when you go in the hangar to choose the livery.

    ......[/QUOTE

    Did v0.93 not fix the hangar flickering..?
    Nope; still flickering...
    Torture numbers and they'll say anything.


    Hubbabubba, Touche à tout.

  9. #84
    SOH-CM-2019 hubbabubba's Avatar
    Join Date
    Sep 2005
    Location
    Montréal, Québec, Canada
    Age
    67
    Posts
    1,143

    Version 1

    Version 1 is available at Flightsim.to as I write this
    Torture numbers and they'll say anything.


    Hubbabubba, Touche à tout.

  10. #85
    Quote Originally Posted by hubbabubba View Post
    Version 1 is available at Flightsim.to as I write this
    Yep. Flightsim.to website is slammed right now.

  11. #86

    Upgrade v1.1

    Lots of changes.

    https://flightsim.to/file/8970/airbu...copter-project


    • Version 1.1 May 28, 2021
      In our screenshots you can see that the H135 now has an EFB that is capable of displaying a web browser or a screen capture from one of your computer's displays.

      This feature requires a bit of advanced setup and we want to walk users through the process as well as take your feedback - the files necessary to run the EFB are exclusive to our Discord members for this reason.

      You can join our Discord channel at https://discord.gg/dUNDGb2Z7c

      Full 1.1 changelog below:

      - update manifest to 1.0
      - update quickstart guide for 1.0
      - fix middle doors overlapping with the handles on the outside of the body.
    • Version 1.0 May 28, 2021
      In our screenshots you can see that the H135 now has an EFB that is capable of displaying a web browser or a screen capture from one of your computer's displays.

      This feature requires a bit of advanced setup and we want to walk users through the process as well as take your feedback - the files necessary to run the EFB are exclusive to our Discord members for this reason.

      You can join our Discord channel at https://discord.gg/dUNDGb2Z7c



      Full 1.0 changelog below:
      - Fixes for SU4: Contact points were causing crashing, skids will be sunk while we work this out
      - Fixes for SU4: ALT works fine again
      - AFCS: Changed to represent the real H135
      - AFCS: Many changes to prevent jerky control
      - AFCS: ALT and HDG modes will always acquire the current reference when engaging
      - FLIGHT MODE and APCP are no longer coupled. Use your preferred mode (L1-L3) and the systems will work identically.
      - Added BEEP TRIM (see hotkeys)
      - GTC.H will now hold heading
      - Updated sounds
      - Do not exceed ENG TRQ value of 130% or you will get an ENG CHIP message. Land Immediately and clear the message using FUZZ BURN.
      - You may now click the interior FRONT door handles to open/close the doors (in addition to the front struts)
      - Fuel gauge levels will now show RED when very low
      - new messages on the message list that are yellow or red will have a GONG sound
      - FND adjusted to more accurately reflect H135
      - TRIM RELEASE binding added (momentary/hold switch, optional to use instaed of AUTOPILOT MASTER binding)
      - Remove TORQUE and ROTOR trim - these are not realistic features and have been replaced by AFCS modes
      - Remove AP page from tablet
      - ALT and HDG "knobs" are now on the APCP (between the seats) (or better: use beep trim)
      - OBS1 and OBS2 softkeys are now on the FND page, once the bearing has been selected
      - Added ALT button and green ON emissive to APCP (use this to toggle ALT)
      - Adjust VMS dial needles / ranges
      - CPL/DCPL now engages/disengages NAV, not engages/disengages AP
      - GTC indications on tablet changed, added to mode strip
      - Tablet home page now shows BEEP TRIM positions
      - Tablet home page has BEEP TRIM soft buttons for those without key bindings
      - Adjust HDG/NAV tracking
      - Fix a bug that caused all scroll events to be lost for MFD knobs and brightness knobs
      - Track VOR/LOC with NAV mode
      - Remove "strut" click points for doors (use only the handle now)
      - Remove the vertical seatbelt from the F/O clickspot, so you can click the F/O's door handle
      - Add a full screen dialog to the tablet that indicates that the collective has not yet been moved, and which bindings to use
      - ALT hold now has a provision for larger angles when further from the setpoint altitude
      - Aircraft page will now show doors off as all open
      - Remove unused airplane services
      - both GTNs to FLIGHT by default now (can still go home for AP)
      - Add MANY new hotkeys - see tools\KEY BINDINGS.txt
      - Upgrade liveries to 8k: POLICE, NAVY, SAMU, SKY HEALTH
      - Partial fix for VR Focus / zoom
      - Enable 2x GTN750 (and all other maps)
      - Remove collective lock
      - Fix bug with NR HI during autorotation

  12. #87
    The detail just gets better and better.
    Attached Thumbnails Attached Thumbnails VpkT_YnQlv6y.jpg  

  13. #88
    Any tips to taking off? I'm giving it full collective and it wont budge from the ground. I'm mapped and see it move, just not lifting off.
    I pass gas!


  14. #89
    SOH-CM-2019 hubbabubba's Avatar
    Join Date
    Sep 2005
    Location
    Montréal, Québec, Canada
    Age
    67
    Posts
    1,143
    Quote Originally Posted by ST0RM View Post
    Any tips to taking off? I'm giving it full collective and it wont budge from the ground. I'm mapped and see it move, just not lifting off.
    Go watch this video;



    The most common mistake is to forget the idle-full transition. You can't muster enough torque to lift on idle only.
    Torture numbers and they'll say anything.


    Hubbabubba, Touche à tout.

  15. #90
    Quote Originally Posted by hubbabubba View Post
    The most common mistake is to forget the idle-full transition. You can't muster enough torque to lift on idle only.
    I was missing that little red covered switch. Thank you.
    I pass gas!


  16. #91

    Upgrade v1.2

    A small upgrade.


    https://fr.flightsim.to/file/8970/ai...copter-project

    Full 1.2 changelog below:

    - Fix a small visual defect in one of the liveries
    - Update the quick start to reference APCP setup
    - Preventing an assistance tip from showing up regarding landing gear
    - Enable escaping L4 if previously saved (just press the tile)
    - Increase the amount of impact on one skid required to cause the game to trigger a crash
    - Mark GTC as amber/INOP since it is not engaging fully and is causing confusion

  17. #92

    Upgrade v1.3

    A surprising upgrade.

    https://flightsim.to/file/8970/airbu...copter-project


    Full 1.3 changelog below:

    - Flight Model: Fix "yaw jitter" at high speeds (over 40kts when hand flying)
    - Flight Model: Reduce yaw authority at speed
    - Flight Model/AFCS: Adjust turn coordination at speed
    - Flight Model: Flying backwards will now be more likely to yaw due to the uneven relative wind
    - Severe MGB damage when flying inverted is back
    - Placards are now on all default liveries
    - Fixed EISI baro knob (now two systems)
    - Add a safety disclaimer
    - In multiplayer, you will now see H135 instead of EC35 for other players
    - Fix text on loading screen ("flight model" etc.)
    - NR HI will now work when under AP
    - NR HI will disengage over 60kts (NOTE: unlike RL, it will not re-engage!)
    - NR HI will now show 104% NR on PFD/VMD
    - Landing gear warning should be suppressed now
    - ETL (effective transitional lift) is now correctly calculated based on wind vector
    - ETL is now omnidirectional (you can enter ETL when flying sideways)
    - MSFS hotkeys "Increase VOR1 OBS" and "Decrease VOR1 OBS" will now work for H135 (not other aircraft, Asobo seem to have not implemented this fully). VOR1 and VOR2.
    - Add a hotkey for cycle flight mode. See tools\KEY BINDINGS.txt
    - Basic/initial implementation of RBS (retreating blade stall) (don't exceed 150kts or you will experience severe instability)
    - Speed tape adjusted to show static VNE, removed yellow/green/white zones

  18. #93

    H135 - soundpack

    An update to the H1355 sound pack. (06/06/2021)

    https://www.flightsim.to/file/9909/h...st-public-beta

    This is the first version which have active pitch effects like blade slapping and other sound effects which change when the power is being increased or decreased.

    Also for the first time all sounds are 7.1 surround now.

  19. #94

    Development build v411

    If you check the discord channel you'll see work continuing on the H135.

    https://discord.com/channels/4265036...35624745222194

    Development build 411 is available

    https://drive.google.com/file/d/1H-4...ew?usp=sharing

    Since version 1.3, this build adds:
    404 - NEW ROTOR: @AeroLynx has spent quite some time over the past weeks to rebuild the rotor and rotor animations. This work is finally ready to show, but will still need tweaking and tuning. Only the most basic effects are implemented so far. - Rotor blades updated with new details, trim tabs, etc. - Rotor blades bend down when powered off. - Rotor blur in 3 stages for higher rotor rpm. - NOTE: Liveries will need an update! Inbox liveries have been reset to the default yellow tipped rotor for now: CLI4D CORP NAVY SAMU SKYHEALTH. - GTN750 will now be automatically loaded on the lower 2 screens if installed. - L:TOGGLE_DOOR_OFF and L:WINDSHIELD_DISABLE will now work from UserSetup
    .
    405 - Updated comp texture (no longer so metallic) - Change rotor blur timing stages - Fix hub getting color from the wrong place on the diffuse - Update Norsk livery

    406 - Flight model: RBS is now only on Advanced mode - Flight model: Increase pedal authority for Basic/Xbox flight modes - Autorotation changes around looking at
    N2. This may be a bug fix for people "falling out of the sky for no reason". - Move default camera viewpoint up just a bit.

    407 - Blade bend ("flap up") now implemented. - Adjusted the rotor animation stages to avoid duplicates or missing rotor segments during wind up and wind down.

    408 - Fix FADEC not being respected on takeoff (but from 406/407)

    409 - Fixes for stuttering/bad performance.

    411 - Fix rear doors disappearing when going "doors off" - Fix a small visual issue with the rotor trim tabs - Increase the size of the clock on the FND page

  20. #95
    Thank you Seahawk for keeping us up with whats new with this bird .

    Bill

  21. #96
    Quote Originally Posted by flewpastu View Post
    Thank you Seahawk for keeping us up with whats new with this bird .

    Bill
    My pleasure.
    I have high hopes for the work this group has undertaken.

  22. #97

    Development build v412

    A small update from v411.

    412 - Update
    -Thumbnails for default liveries -
    -Update default liveries with new rotor blur
    https://discord.com/channels/426503612819046401/814935624745222194


    https://drive.google.com/file/d/1NUG...ew?usp=sharing

  23. #98
    Thanks Seahawk72s.

  24. #99

    Development build v414

    Development builds 413 & 414.

    413 - Flight model: reduce yaw kick at lower speeds - Rotor will now spin more smoothly and slowly when in flight
    414 - Rotor will now spin more smoothly all the time
    https://drive.google.com/file/d/1jeJEw2Fk7Zw6-SXcS_zn_PA7zL7EP-6n/view


    Attached Thumbnails Attached Thumbnails unknown.png  

  25. #100
    Quote Originally Posted by Penzoil3 View Post
    Thanks Seahawk72s.
    Great for NeoFly !

    Click image for larger version. 

Name:	Screenshot (673).jpg 
Views:	10 
Size:	404.0 KB 
ID:	83637

Members who have read this thread: 0

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •