Ive got V5+ installed and running fluid. Few ? on my PCU install acceptance. Can Orbyx Vector and Global be used and like XP11 is there option for Rwys following terrain or level flat and where is that thing located in the Options panel?
Ive got V5+ installed and running fluid. Few ? on my PCU install acceptance. Can Orbyx Vector and Global be used and like XP11 is there option for Rwys following terrain or level flat and where is that thing located in the Options panel?
AMD FX 8-Core Black 4.2Ghz, 8G Ram 2TB HD, W8.1 pending W10, ATI R5 2G X2 Crossfire
http://www.canadianarcticfse.com/
CG-1976 The sloping runways feature is not an automatic function. The airport or runway has to have been constructed to allow for it and then it will appear sloping or undulating - there is no magic button fix! Otherwise the runway will be flat and if ground does undulate the runway will come and go along its length due to the bumps!. However the slope factor is accurate for example if you landed on a suitable hillside up hill, the aircraft will roll back down the hill on you and if it is steep enough the handbrake will not hold it! There are quite a few sloping or undulating runways in P3D it is addon scenery that was made pre V5 that will be an issue!
I think I blew the engine - bummer!
Old meets old at Marseille. RFN's P3D Latecoere - 25
Running ahead of dirty weather approaching Miami International.
One of the very few (dubious!) benefits of being stuck in another COVID lockdown is spending way too much time in the sim, constructively or not.
"Illegitimum non carborundum".
Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
Intel Core i9 10980XE Extreme Edition X
ASUS ROG Rampage VI Extreme Encore MB
Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,
GastonJ - ah so right! All else fails read the manual. Too much excitement with all these new machines. Time to settle down and do some serious simming!
This is how LM use P3D 330 degree spherical full motion sims.
"How true, is that cloud with the True Sky adjustments?"
Using your settings Mike but I dialed in some extra heavy weather.
"Illegitimum non carborundum".
Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
Intel Core i9 10980XE Extreme Edition X
ASUS ROG Rampage VI Extreme Encore MB
Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,
Late afternoon out of LFLL.
"Illegitimum non carborundum".
Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
Intel Core i9 10980XE Extreme Edition X
ASUS ROG Rampage VI Extreme Encore MB
Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,
Very nice shot there Wombat. Think the little Airbus needs a good wash - LOL.
Starting to dial in the P3DV5.2.
Did this one with REX/HDR/Autofocus checked texture res 2048.
Still trying to figure out REX with Atmospheric ticked leading a CTD on V5.2. Also what the heck is the texture streaming option??
AMD FX 8-Core Black 4.2Ghz, 8G Ram 2TB HD, W8.1 pending W10, ATI R5 2G X2 Crossfire
http://www.canadianarcticfse.com/
"Very nice shot there Wombat. Think the little Airbus needs a good wash - LOL."
She's a hard working girl Mike.
"Illegitimum non carborundum".
Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
Intel Core i9 10980XE Extreme Edition X
ASUS ROG Rampage VI Extreme Encore MB
Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,
MJ's C47 in 5.2. This Jan Kees old FSX Qantas paint now using the base PBR textures from the P3D PBR model as part of its texture map. Pretty shiny!
This really illustrates how 5.2 + PBR and EA and master texture work can produce a very good polished aluminium finish - factory fresh. The dynamic reflections which are really the opposite scenery from the view is quite a change to fixed textures as well. In the right angle you get the sun glinting of the prop hubs in flight
P3DV5.2 unedited
MSFS
The real thing
Bookmarks