Aircraft Compatibility thread for P3D V5
Page 1 of 12 12345678911 ... LastLast
Results 1 to 25 of 297

Thread: Aircraft Compatibility thread for P3D V5

  1. #1

    Icon4 Aircraft Compatibility thread for P3D V5

    We will use this top thread to report on P3D V5 compatibility of aircraft or other driveable vehicles.
    My scenery development galleries:
    https://www.dropbox.com/sh/x0skkam7xu8zz8r/DFwnonB1nH

    Solomon 1943 V2 Open beta download: http://www.sim-outhouse.com/download...on-1943-V2.zip
    Solomon 1943 V2 update 2013-02-05 download: http://www.sim-outhouse.com/download...2013-02-05.zip


    Current Project: DHC-4 / C-7a Caribou by Tailored Radials
    Dev-Gallery at https://www.dropbox.com/sh/qjdtcoxeg...bAG-2V4Ja?dl=0

  2. #2
    So far so good...
    Skunkworks F-104G and G-91 both basically work following a quick port-over using addons.cfg
    Ditto the Just Flight (AH) Meteor and Hunter
    The Just Flight Hawk demo (full function for all of April) has a V5 install option and installs (directly into Simobjects) / works fine too.

    Skunkworks F-84F full install worked the first time but now plays 'bad boy' music only ... need to read the manual and get a cold&dark start - probably not a P3Dv5 issue...

    A2A Cherokee 180 works fine work following a quick port-over using addons.cfg.

    Cheers
    Keith
    Last edited by keithb77; April 15th, 2020 at 05:12.

  3. #3
    The VS Panther and P-36 seems to working with no issues.

  4. #4
    I tried some of the older and dear titles like the Aerosoft OV10 Bronco and the Catalina, and Piglets aircraft, everything works great.
    My scenery development galleries:
    https://www.dropbox.com/sh/x0skkam7xu8zz8r/DFwnonB1nH

    Solomon 1943 V2 Open beta download: http://www.sim-outhouse.com/download...on-1943-V2.zip
    Solomon 1943 V2 update 2013-02-05 download: http://www.sim-outhouse.com/download...2013-02-05.zip


    Current Project: DHC-4 / C-7a Caribou by Tailored Radials
    Dev-Gallery at https://www.dropbox.com/sh/qjdtcoxeg...bAG-2V4Ja?dl=0

  5. #5
    Skunkworks F-84F full install works fine with a cold&dark start

    SSW Phantom works OK, as does the
    Flying Stations Sea Fury.
    Last edited by keithb77; April 16th, 2020 at 00:11.

  6. #6
    Has someone been able to run the Aeroplane Heaven C-119 on V5? I did a fresh install and the sim ctd's when I load it.


    Cheers,
    Mark
    My scenery development galleries:
    https://www.dropbox.com/sh/x0skkam7xu8zz8r/DFwnonB1nH

    Solomon 1943 V2 Open beta download: http://www.sim-outhouse.com/download...on-1943-V2.zip
    Solomon 1943 V2 update 2013-02-05 download: http://www.sim-outhouse.com/download...2013-02-05.zip


    Current Project: DHC-4 / C-7a Caribou by Tailored Radials
    Dev-Gallery at https://www.dropbox.com/sh/qjdtcoxeg...bAG-2V4Ja?dl=0

  7. #7

    A2A p40

    Curious if the A2A P40 (P3D V4 version) will install to V5 of P3D and the accusim.

  8. #8
    Quote Originally Posted by gray eagle View Post
    Curious if the A2A P40 (P3D V4 version) will install to V5 of P3D and the accusim.
    I've tried reusing the P3Dv4 install via an addon.cfg entry (which works for the Cherokee) but the P-40 crashes P3Dv5 every time, not yet tried a fresh install.

  9. #9
    Quote Originally Posted by keithb77 View Post
    I've tried reusing the P3Dv4 install via an addon.cfg entry (which works for the Cherokee) but the P-40 crashes P3Dv5 every time, not yet tried a fresh install.
    Found this nugget of news about that:

    https://a2asimulations.com/forum/vie...p?f=23&t=70166

  10. #10
    Quote Originally Posted by roger-wilco-66 View Post
    Has someone been able to run the Aeroplane Heaven C-119 on V5? I did a fresh install and the sim ctd's when I load it.


    Cheers,
    Mark
    As Tom mentioned to me, renaming the windshield.dll to windshield.dll_bak will do the trick until a fix comes out.


    Cheers,
    Mark
    My scenery development galleries:
    https://www.dropbox.com/sh/x0skkam7xu8zz8r/DFwnonB1nH

    Solomon 1943 V2 Open beta download: http://www.sim-outhouse.com/download...on-1943-V2.zip
    Solomon 1943 V2 update 2013-02-05 download: http://www.sim-outhouse.com/download...2013-02-05.zip


    Current Project: DHC-4 / C-7a Caribou by Tailored Radials
    Dev-Gallery at https://www.dropbox.com/sh/qjdtcoxeg...bAG-2V4Ja?dl=0

  11. #11
    Just Flight Canberra comes with a V5 installer now and works fine.
    The Just Flight BAC Lightning F6 works on a port-over, though the tape ASI is not functioning and some light reflections are a little wierd.
    Virtavia Sea King works OK on a port-over, rotor blades invisible in external views.
    The Aeroproyecto C172 Floatplane installs and works OK.
    Cheers
    Keith

  12. #12
    All mine C-47s with PBR makes P3D crash.
    Roy

  13. #13
    Roy, change in your panel folder - windshield.dll to windshield.bak. That should work.
    Regards, Tom Stovall KRDD


  14. #14
    Dino's MB-326s and A-4E/F seem to make the transition with no problems noted. Iris' PC-21 and Texan Driver likewise seem to have no problems. Just make sure you point the installer at P3DV5 folder...more to come.

    Kent

    ***Update: The JF Fokker F27 seems unchanged and works fine...the JF Hunter....not so much (heard there was an update that is P3D V5 compatible, but I couldn't find JF's supposed first batch of V5 updates...)****
    Last edited by ColoKent; April 19th, 2020 at 18:27.

  15. #15
    Members +
    Join Date
    Oct 2019
    Location
    João Pessoa, Paraíba,Brazil
    Age
    68
    Posts
    10
    Quote Originally Posted by DCA1161 View Post
    All mine C-47s with PBR makes P3D crash.
    Roy
    Same here, all my C-47's cause a CTD . Any work arounds?

  16. #16
    Quote Originally Posted by aguiar View Post
    Same here, all my C-47's cause a CTD . Any work arounds?
    Disable the windshield.dll in the C-47 folder. It's the same dll that causes the A2A models to crash.
    Expect banging, belching and an occasional manly fart as you roar down the runway at full power. (I have found that the engine can make similar noises)

  17. #17
    The Just Flight Hawk T1A has a V5 Installer. Although the screen in external view is black against clear sky but all ok when you are in cockpit.

  18. #18
    Members +
    Join Date
    Oct 2019
    Location
    João Pessoa, Paraíba,Brazil
    Age
    68
    Posts
    10
    Quote Originally Posted by paiken View Post
    Disable the windshield.dll in the C-47 folder. It's the same dll that causes the A2A models to crash.
    Hi Paiken, I couldn't find a windshield.dll in the C47 folder, neither in the panel or anywhere else inside the C-47 folder. Thanks anyway

  19. #19
    All Cr1 commercial addons are up to date now. Look for a release very soon.

    Thanks for your support!
    Cr1-Software.Ltd
    www.cr1-software.com

    Your source for fine Flight Simulation enhancements!

  20. #20
    Quote Originally Posted by aguiar View Post
    Hi Paiken, I couldn't find a windshield.dll in the C47 folder, neither in the panel or anywhere else inside the C-47 folder. Thanks anyway
    Go to the main P3D 'Gauges' folder and it will be found there. Either rename the file so that it doesn't get accessed, or simply delete it. Any aircraft that is tied to that windshield.dll by A2A Simulations will cause a CTD unless that file is disabled by renaming or removed.

  21. #21
    Members +
    Join Date
    Oct 2019
    Location
    João Pessoa, Paraíba,Brazil
    Age
    68
    Posts
    10
    Quote Originally Posted by Bomber_12th View Post
    Go to the main P3D 'Gauges' folder and it will be found there. Either rename the file so that it doesn't get accessed, or simply delete it. Any aircraft that is tied to that windshield.dll by A2A Simulations will cause a CTD unless that file is disabled by renaming or removed.
    Thanks John, I couldn't find a windshield.dll though

  22. #22
    In the case of the Manfred C-47 in particular, the windshield.dll file is likely present within the 'C47' folder within the aircraft's 'Panel' folder (sorry, I'm away from my FS computer right now so I'm going off of memory).

  23. #23
    Quote Originally Posted by aguiar View Post
    Hi Paiken, I couldn't find a windshield.dll in the C47 folder, neither in the panel or anywhere else inside the C-47 folder. Thanks anyway
    In my computer the file is located in the "SimObjects/Airplanes/Douglas_c_47_PBR/panel" folder. It's called Windshield.dll. Just add _bak to the file name and you should be good to go.
    Expect banging, belching and an occasional manly fart as you roar down the runway at full power. (I have found that the engine can make similar noises)

  24. #24
    Members +
    Join Date
    Oct 2019
    Location
    João Pessoa, Paraíba,Brazil
    Age
    68
    Posts
    10
    Quote Originally Posted by paiken View Post
    In my computer the file is located in the "SimObjects/Airplanes/Douglas_c_47_PBR/panel" folder. It's called Windshield.dll. Just add _bak to the file name and you should be good to go.
    Got it working now, guys. Thanks a lot




    Francisco Aguiar

  25. #25
    Skunkworks have released V5 versions of the Fiat G-91 and F-104G and S, as separate V5 models.

Members who have read this thread: 126

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •