Is there any way to get Area 51's Kiowa to work in V5? NC
Is there any way to get Area 51's Kiowa to work in V5? NC
[QUOTE=goodyzero;1222159]I tried FSX aircrafts on the V5.
Classics Hangar Bf108, Fw190A, Fw190D, Ta152, gauge sound, Payload Manager not work [QUOTE]
this is disappointing since I live the Classics Hanger Fw-190s/Ta-152s. The sounds are one aspect that make them so special.
IIRC most of the older 32bit aircraft worked up to P3Dv3, which would make sense.
Once past that point not a lot handled the 64bit P3D4.
Same goes for the Area 51 series.
"Illegitimum non carborundum".
Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
Intel Core i9 10980XE Extreme Edition X
ASUS ROG Rampage VI Extreme Encore MB
Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,
I tyied the CH warbirds soundgauge issue.
Copy the "FBGS_XMLSound_x64.dll" to gauge folder.
Re,edit Panel.cfg :
Rename to "FBGS_XMLSound_x64" from "ClassicsHangar_XMLSound".
But,I got the "FBGS_XMLSound_x64.dll" from the payware aircraft.
All GAS models are compatible with V5. That said creating an installer for it using Install Creator Pro is causing an issue with erroring out whereas it does not for V4. If installing for V5 best to create a temp file extract the bits to that and manually add to V5 folders.
For those of you that have been able to get the Aerosoft F-14 installed to v5. Has anyone had an issue with departing a carrier, either Javier's Nimitz or the Kitty Hawk?
I can get hooked to the catapult and start the cat shot, but at the end of stroke the Tomcat immediately goes to the top of the water and continues moving forward. I am unable to rotate or pitch up to climb. To see if it was carrier related or aircraft, I tried Dino's T45 and was able to depart normally.
Anyone else seeing this or have an idea on how to fix it?
Thanks,
Bill
All Cerasim helicopters work in v5.
MILVIZ just announced their T-38A ADV Redux is now V5 compatible through a free MVAMS update...
Kent
The IRIS C-27 Spartan works in v5. Although I didn't actually get to fly it. After I loaded it up in the sim the engines stopped, and I forgot how to get them started again (I haven't flown this plane in a long time) LoL.
Working through reinstall of aircraft from FSXA into P3DV5.
These are all working for me so far :
JBK's Martin M130, Short S23, S30, Vickers Viscount 700 and 800.
AH Lancaster, MkV Spitfire, BAC 1-11, HS-748, VC-10 (Some minor issues), DC6A/B/Cargo, Mosquito, Comet 4
A2A - Constellation L049, Spitfire Mk1 (The old WoA version)
Real Air Spitfire MK 9.
Milton Schupe's - Lodestar, Dash 7
Flight Replicas - All of them so far (DC4, Boomerang, Piper Cub, P40, Heron, Liberator)
FSAddons - Anson, Bristol Freighter, Hudson
George Diemer's - Sikorsky S42, S43
Manfred Jahn's - C47, B50, B97, Constellation 1049G
Coolsky - DC9-30
Aerosoft DC-8-50
CLS DC-10 HD
Henrik Nielsens Global AI Ship Traffic V2 (After many dramas with the xml parsing at last got it to point to the scenery and is up and working beautifully).
My only comment so far - the dynamic lighting makes for very dark cockpits (sometimes or most times) but other time of day can be fine (depends on the cockpit window size it seems). The plain aluminium always has a grey-blue look but dynamic reflections work and any white colour always seems to be off white (but ok).
I guess I am really impressed the way P3DV5 transforms even old models such as the JBK Viscount VC - hard to believe this was the same aircraft from FSX especially the VC they go across really well with added depth and shading - amazing actually.
And yep it is goodbye FSX - sure few old favourites missing but time will tell. (Capt Sim you got to get the 707 and 727 into the modern era).
Now onto to the scenery addons!
The AF Anson works fine.
The CBFS Beaufighter and Mosquito B.IV.
M Schupe - Ventura
Virtavia Avro Lincoln
The old Aerosoft Twin Otters (pre Xtended version) 100 and 300 series all work ok.
JBK's Douglas C124A_X and C124C_X.
Only comment on the AH/JustFlight F27, BAC 111 and HS748 all updated for V5 but produce a weird green hue not grey to the cockpits - not sure why that is but they work ok!
Alas the JBK Hythe, Sandringham and Solent do not work as they do not have an internal model. Nor does Rick Pipers HS748 same reason.
Dave Garwood's DH89 Rapide (V4FSX) comes up ok in P3DV5.1
Has anyone had any luck with the Milviz Beaver and Otter?
I have them installed and working to some extent.
Some engine instruments don’t work due to an issue with the XMLTools.dll
I have the correct .dll for P3Dv5 but still can’t manage to sort it out.
Unfortunately Milviz doesn’t seem to be in any hurry to update their products 🙁
I7-6700K @ 4.3, ASUS Z170-P, 32GB DDR4 2133, RTX 2070 8GB, Windows 10 Pro, P3Dv5.3 HF2
No luck so far re the Milviz DHC2 and DHC3 I wait patiently. Probably have indigestion about which version of P3D to do (5.1 I hope is the one they go for).
The freeware Golden Age Simulations DH-60 works fine in P3DV5.1
MB Gigabyte Z690 Aorus Master CPU i7 12700K @4.6 GHz GPU Gigabyte RTX 3080ti Cooler Noctua NH-U15 with 2 fans RAM 32MB Corsair DDR5 Vengeance 5200MHz Power Supply Corsair HX1000 Watt Case Thermaltake level 20 xt Windows 11 64 bit Thrustmaster HOTAS warthog stick and throttle Thrustmaster TPR pendular rudder pedals
MusterPilot -thanks will see how it goes. Currently doing the rounds with lots of folks re passwords-accounts etc etc etc etc. Why everyone has to make this so hard is beyond me!
Update - Downloaded both the Beaver and Otter again and installed into P3DV5. They install fine textures are ok etc but lots of problems with switches not working, lights for example. Checked the Milviz Forum still no news of the updates for V5. Noted the xml route offered but might wait this one out, I have enough to do with scenery reinstallation etc etc, thanks anyway.
Last edited by BendyFlyer; November 17th, 2020 at 23:55.
Thanks for the replies, I have the XML file from the Milviz forum, still no luck!
I7-6700K @ 4.3, ASUS Z170-P, 32GB DDR4 2133, RTX 2070 8GB, Windows 10 Pro, P3Dv5.3 HF2
You need to install the XMLTools64.dll (there should be a "XMLTools64Installer.exe" in your G:\Prepar3D v5\SimObjects\Airplanes\DHC-2 Beaver Milviz)thunderstreak
I have them installed and working to some extent.
Some engine instruments don’t work due to an issue with the XMLTools.dll
Nota : replay with quote does work for me today
Yes, I did that (actually got a newer version of the XMLTools64 installer from Milviz support).
Still no luck, might try reinstalling the aircraft.
I7-6700K @ 4.3, ASUS Z170-P, 32GB DDR4 2133, RTX 2070 8GB, Windows 10 Pro, P3Dv5.3 HF2
Can you have a look at your main P3Dv5.1 folder and see that you have Xceed.Wpf.Toolkit.dll installed I took this from P3Dv4.5 when I had it installed and all was good if you pm me with your email I can send the file to you
also when you do install the aircraft make sure you delete TrueGlass and RealLight also the windscreen dll I think that is in the panel cfg
John
MB Gigabyte Z690 Aorus Master CPU i7 12700K @4.6 GHz GPU Gigabyte RTX 3080ti Cooler Noctua NH-U15 with 2 fans RAM 32MB Corsair DDR5 Vengeance 5200MHz Power Supply Corsair HX1000 Watt Case Thermaltake level 20 xt Windows 11 64 bit Thrustmaster HOTAS warthog stick and throttle Thrustmaster TPR pendular rudder pedals
I checked, I do have that .dll in the main folder.
I7-6700K @ 4.3, ASUS Z170-P, 32GB DDR4 2133, RTX 2070 8GB, Windows 10 Pro, P3Dv5.3 HF2
MB Gigabyte Z690 Aorus Master CPU i7 12700K @4.6 GHz GPU Gigabyte RTX 3080ti Cooler Noctua NH-U15 with 2 fans RAM 32MB Corsair DDR5 Vengeance 5200MHz Power Supply Corsair HX1000 Watt Case Thermaltake level 20 xt Windows 11 64 bit Thrustmaster HOTAS warthog stick and throttle Thrustmaster TPR pendular rudder pedals
As Captain Sim will probably take a year (if ever) to redo the B727 and B707 for P3DV5 I went hunting for a substitute. Well Thomas Ruths FSX Native B727-100 and B727-200 (Via FlightSim.com and Liveries via AVSIM) work fine in P3DV5.1 There are few minor issues with clickable switches in the VC but the AP works (Even if the pop up is in German) a few minor issues but in all a satisfactory substitute for the time being. Not a great range of paints but beggars cant be choosers. Recommended.
Bookmarks