A different site with some of those captures Jim mentioned earlier.
https://www.tapatalk.com/groups/CanadianPilots/fsd-announces-lockheed-jetstar-t2562.html
A different site with some of those captures Jim mentioned earlier.
https://www.tapatalk.com/groups/CanadianPilots/fsd-announces-lockheed-jetstar-t2562.html
He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors.
Thomas Jefferson
Intel Core i9-9900K Coffee Lake | Cooler MasterAir Maker 8 CPU Thermal Cooler | ASUS ROG Strix Z390-E LGA 1151 | CORSAIR Vengeance RGB Pro 32GB 288-Pin DDR4/3200 | EVGA GeForce GTX 1080 Ti 11GB | SAMSUNG 860 EVO Series M.2 1TB SSD | Mushkin Chronos 240GB 2.5 SSD | WD Black 2TB 7200 RPM |WD Black 5TB 7200 RPM | CORSAIR HX Series HX1200 PSU | Windows 10 HP 64-bit
Were the flight dynamics ever updated?
PM sent to gman. I just managed to score 3 manuals on the Jetstar II / C-140, so that should help.
Unfortunately the Jetstar will not happen here at SOH, Gordon has decided to pursue other interests. Perhaps it will happen elsewhere sometime in the future, I sincerely hope so.
The Old Master Sergeant
I wonder if in the circumstances Jim Goldman would extend his generous offer to someone else here with the skills and interest to develop this. It's just too good lose.
Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.
Why don't they talk with Milton Shupe? Make 3 Versions, FS2004, FSX, P3D?
USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d
Current System Specs:
FSX/Accel | Windows10 64bit
Motherboard: MSI760GM-E51(MS-7596)
CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
GPU: NVidia GTX 970 (4GB GDDR5)
or Hiroshi Igami?
Too small. Hiroshi is a great modeller but likes big Boeings.
Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.
Great to see you are there for us Jim!Guys, if Gordon is no longer working or interested in finishing the project I will be more than happy to share the source files..hopefully for a MSFS2020 version as well .
Let me know
Jim
Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.
That is cool Brian! I used to fly the flaps off the HJG JetStar when I first discovered FS2004. Still a nice model.I ran HJG's Jetstar 1 through MCX and added the FSX converted Falcon 50 VC (With a panel cfg and bitmaps modified to a four engine configuration) Works pretty well for a fs 2002 Model run through the converter.
Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.
Files transfered to Roland Berger....
He will need assistance from the community at large to make it happen.
Again the stipulation....freeware....community project....and should be for FSX....Prep.....MSFS2020.
Best
Jim
Great news to hear Jim, thanks! As a former VC-140B maintainer I've looked forward to seeing this project finally completed. Plenty of talent here at SOH, hoping they'll step up to the plate. I'll be watching this thread for further progress!
The Old Master Sergeant
Dear All
I have a first look ( I am off Manfred Jahn's Connie,DC Team) and see where we can go.
I also will start a new thread as soon something can be visible shown
But as JIM says I will need help and will ask community for it
THANKS a lot Jim
Roland
This is wonderful news. Thank you Jim and Roland!
Brian
Very grateful for this wish being granted!I wonder if in the circumstances Jim Goldman would extend his generous offer to someone else here with the skills and interest to develop this. It's just too good lose.
Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.
Dear All
I had a first longer look to the model
Jim- really stunning, very high detail. Even great in todays world, THANK YOU
I can say after some resistance the exterior of the Jeststar now kind of flys* in P3DV4.4 ( which means in FSX as well )
see below
But still way to go
VC as you can see has no gauges. So that need to be adressed, together with an FSX/P3D compatibel gauge.cab
Who wants to take the challenge in creating XML gauges for the plane please drop me a PM.
I can provide some/many- but not all gauge bitmaps as a start
I keep the tread here updated
*FDE still good needs minor tweaking but so far only an old 2D panel to operate the flight testing
Bookmarks