Thanks Jim, I had the lines at intersection blurred but thought I should make them more distinct. I definitely agree with you. Of to blur the textures.
Thanks Jim, I had the lines at intersection blurred but thought I should make them more distinct. I definitely agree with you. Of to blur the textures.
Regards, Tom Stovall KRDD
Yes I can make four different setting. Axis assignments only to my two throttle levers. I gave engine one and three to the left lever. I gave engine two and four to the second lever. The axis assignments work perfectly with other four engine aircraft. I have messed with this setting in every way but Sunday but the results are always the same. Engine one has lower RPM than the other three but will got to 100 percent power. Very strange.
Regards, Tom Stovall KRDD
Interesting. In P3Dv4.5 I have the Fraser McKay 2D panel and all pop up gauges functioning fully. No problem with engines not running evenly. I also adjusted the fuel settings in the air.cfg so that after take off you can switch off the main tanks and use first the wing slipper tanks until they are almost empty, then switch to the others for the remainder of the flight. The electrical, hydraulics and start up functions are quite detailed. I find having these systems - even though not in the VC - adds a lot to the immersion and enjoyment.
Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.
1 Suggestion- a bit odd though
Delete that part in panel.cfg
[Window02]
file=throttle.bmp
Background_color=0,0,0
size_mm=627,352
window_size_ratio=1.000
position=8
visible=0
ident=THROTTLE_PANEL
window_size= 0.393, 0.270
window_pos= 0.630, 0.858
gauge00=LJS2!PK_Brake, 478,113,77,76
gauge01=LJS2!Flap_Lever, 503,221,55,190
gauge02=LJS2!THROTTLE_1, 189,2,65,237
gauge03=LJS2!THROTTLE_2, 260,1,65,236
gauge04=LJS2!THROTTLE_3, 328,4,65,233
gauge05=LJS2!THROTTLE_4, 395,4,65,232
gauge06=LJS2!Trim, 75,385,65,63
gauge07=LJS2!Ailerons, 395,392,58,49
gauge08=LJS2!Rudder, 307,391,59,47
I really dont know as my case is different and was off the first P3D download here
Engine 3 never revs up ?
Roland
Thanks for the response Roland, I will definitely give this a try. I did try deleting all of Window 2 when I couldn't find VC Window 2 but no joy. Back after testing. This is a great project. Some fantastic folk giving input.
Back after testing. No joy as engine one shows 26 on the gauge display with the other three showing 72.
Regards, Tom Stovall KRDD
Post a screenshot of the VC and engine page please out of P3D
Then restart P3D ( it unfortunately sometimes former settings ) and try again
Also you can give the FSX light download a try
Best regards
Roland
dearTom
Thats not latest panel- some intermediate step ( of which we have many sorry)
Of couse I can post latest here, but also gauges are different to latest P3DV4 download here( or Avsim or Simviation)
I would download that and try- honesty
Roland
PS; that still hates to work- maybe the P3D is too heavy for your machine/setting
then the FSX light download here may float the boat
Thanks Roland, I will check the downloads again. As for the machine, I make them myself so there is no problem with CPU power or ram. Really appreciate the help. I had to be away for a bit but back all the rest of the day to test.
Also, here are a couple new pics of the camo version I have been working on.
Regards, Tom Stovall KRDD
Roland, that did it. I downloaded the version with PBR. All engines work perfectly. Your help is very much appreciated.
Regards, Tom Stovall KRDD
Great Job Roland!! You are Best modeller!
After working on some improved textures, I noticed that I could not find empanage de-ice boots in any pictures, and all leading edges were either chrome or painted.
Reviewing manuals I have, it is clear that the JETSTAR I had them, the JETSTAR II did not. In a lengthy description of the entire de-ice system the JSII had wing boots only, heated engine inlets and windshields - nothing on the rear stabs.
I have reworked these areas and will be posting updated repaints and a white / metal paint kit as significantly improved updates. I hope to finish through the coming weekend.
Just for INFO here-->THATS FS9 !!!!
Gregory has taken the task to repair, and test, as loabour of Love, Jim Goldman's Jetstar II in FS2004/FS9
Soon we will post here, and we hope you have fun flying it
As I even do not have FS9 anymore Glory goes to Jim and Gregory
You can look below
Roland
Attached Thumbnails
Hi FS9 ONLY !!!
Gregory made the first FS9 test version- and textures and gauges and ....... (Thanks )
Pls have a look and report any problems- if so
There may be some gauges empty-->Payware
Do not forget, unless you have, to ut the GPWS into your sound folder
https://we.tl/t-pKBrhjdWjq
Happy Flying
Roland
Attachment 85492Attachment 85493
Hi All
Updated Paintkit by Mike ( thanks a lot ) is available in Downloads
So please fellow repainters give is a go !!
Thank you
Roland
PS : in the FS9 Download there is a now paint in too-->You can get here bellow as well
https://we.tl/t-qNzeqcWZh5
Stoval, Any ETA on the USAF paints? Looking mostly for the VC-140 and the Euro 1 C-140.
You can't take the sky from me...
Bookmarks