GAS Stampe SV-4B for FSX FSX SE and P3D

[Spad54]

GAS Stampe SV-4B for FSX FSX SE and P3D

There is a problem with the PayLoadz link that is not delivering the product once purchased. I'm killing the link until that can be corrected. I'm off to my real job now so it will be some hours before it can be fixed. Sorry. (Roger please kill the original thread until I get this sorted out sometime this evening thanks)


(https://www.payloadz.com/go/sip?id=2902511)

[DaveB]

Rgr that Paul and nice to see you're able to post again;)

I had no problem with the original link but may have been one of the very early purchasers. I say that because something may have unwittingly happened to it since. All good here and both patches received;)
ATB
DaveB:)

[Dumonceau]

Now this is frustrating. paypal charged once again, and no more possibility to purchase this gem...

Johan

[Spad54]

Now this is frustrating. paypal charged once again, and no more possibility to purchase this gem...

Johan

I'll see to it that you will get it. Please check pm

[Spad54]

Rgr that Paul and nice to see you're able to post again;)

I had no problem with the original link but may have been one of the very early purchasers. I say that because something may have unwittingly happened to it since. All good here and both patches received;)
ATB
DaveB:)

I can only reply to this thread not my original Most odd and frustrating

[Dumonceau]

I can only reply to this thread not my original Most odd and frustrating

Spad,

Thanks for your pm. That is highly appreciated. I've taken the liberty to spread the word about this among my little part of the Belgian simming community.

Standby for quite a few sales with email addy's that end with .be! A lot of the boys are quite excited about this release. Especially those who learned to fly RW on the SV-4B in the BAF!

Take care,

Johan

[Spad54]

Here is the new link for the model. Ive tested it and it works. There maybe a delay of a few minutes but all seems nominal now. If you encounter ant issues contact us at our support e-mail found on our webpage. Sorry for the inconvenience. ( I still can't post to my original thread so if you want me to reply please post here.) No patches are needed for this version. The offer has been extended until June 5

http://www.payloadz.com/go/sip?id=2903073 (https://www.payloadz.com/go/sip?id=2903073)

[doublecool]

I have a receipt showing I have paid for the Stampe

I sent and email requesting a download link or file to your contact us address

I still have not heard back :ernaehrung004:

Thank you in advance for some clarity... as to what we are to do next...
I will not be multi credit charging my card for this purchase... as I do not want to go thru that potential issue please

Thank you for your help

[katonic]

Paul,

I placed my order with the new link above and Payloadz gave me a message indicating my order was being processed and that I would receive a download link via email. They also gave me this link to look up my order status:

https://www.payloadz.com/d1/lookup.aspx

From there I was able to lookup my order for the Stampe and was given a download link. I'm not sure why they wouldn't be able to do it during the normal order process but perhaps this bit of info will help others!

Chris

[Spad54]

I have a receipt showing I have paid for the Stampe

I sent and email requesting a download link or file to your contact us address

I still have not heard back :ernaehrung004:

Thank you in advance for some clarity... as to what we are to do next...
I will not be multi credit charging my card for this purchase... as I do not want to go thru that potential issue please

Thank you for your help

Please check your PM and we will get you the model. Thanks

[Spad54]

Paul,

I placed my order with the new link above and Payloadz gave me a message indicating my order was being processed and that I would receive a download link via email. They also gave me this link to look up my order status:

https://www.payloadz.com/d1/lookup.aspx

From there I was able to lookup my order for the Stampe and was given a download link. I'm not sure why they wouldn't be able to do it during the normal order process but perhaps this bit of info will help others!

Chris

Thanks Chris I've just now checked the link and the purchase went through with no issues. After confirmation went to my e-mail and received 2 communications the receipt for payment and 1 minute thereafter a link to download.

[Dumonceau]

Paid for and downloaded. Do we need to install the patches or is the installer patched?

Cheers,

Johan

[doublecool]

I still am waiting for a link, but hoping to get this little beauti in the air this afternoon... hint hint :ernaehrung004:


hint hint hint

hint...

[Spad54]

I still am waiting for a link, but hoping to get this little beauti in the air this afternoon... hint hint :ernaehrung004:


hint hint hint

hint...

PayLoadz link Link sent sorry for the bother

[Spad54]

Paid for and downloaded. Do we need to install the patches or is the installer patched?

Cheers,

Johan

I saw that you purchased today, no need for the patches if purchased after 5/28

[Dumonceau]

And this is what it looks like in P3D v2.5

http://s17.postimg.org/u0d12k5v3/Stampe.jpg

Just one small glitch, the installer points to prepar3D and not to Prepar3d v2. No biggie though!

Thanks for this gem Spad!

Johan

[doublecool]

Got my Stampe,

Sorry for this question but I did purchased 5/28/15... but just got the download link today... do I need patches???



Will post pic's later, but off to enjoy my new toy

Thank you again for gettin er done :ernaehrung004:

[Cees Donker]

Well, I bought mine on the 27th and never got a chance to download the patches as that thread is gone........


Cees

[Dumonceau]

Here is a link to the patch Cees

http://goldenagesimulations.com/GAS/Stampe_Patch.zip

Johan

[Spad54]

Got my Stampe,

Sorry for this question but I did purchased 5/28/15... but just got the download link today... do I need patches???



Will post pic's later, but off to enjoy my new toy

Thank you again for gettin er done :ernaehrung004:

You do not need the patch you the version you have is the most recent

[Spad54]

And this is what it looks like in P3D v2.5

http://s17.postimg.org/u0d12k5v3/Stampe.jpg

Just one small glitch, the installer points to prepar3D and not to Prepar3d v2. No biggie though!

Thanks for this gem Spad!

Johan

You're welcome Johan. It was a fun project especially because of the engagement of the SOH members as it progressed. As for the installer, that was intentional and not sure who has what version of P3D therefore the owner has to make that last navigation.

[Cees Donker]

Here is a link to the patch Cees

http://goldenagesimulations.com/GAS/Stampe_Patch.zip

Johan


Thanks Johan!

Cees

[Spad54]

Spad,

Thanks for your pm. That is highly appreciated. I've taken the liberty to spread the word about this among my little part of the Belgian simming community.

Standby for quite a few sales with email addy's that end with .be! A lot of the boys are quite excited about this release. Especially those who learned to fly RW on the SV-4B in the BAF!

Take care,

Johan

Thanks for the referral. Much appreciated:ernaehrung004:

[Cees Donker]

I'm having a lot of fun with this plane!

Great job Paul!

Cees

[doublecool]

I really like my Stampe too...
all kinds of pilot movement in the pit :applause:

Thank you :ernaehrung004:

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=23620&stc=1 http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=23621&stc=1

[Dimus]

I really like the flight dynamics in this plane. Never flown one but they are believable. I like the way it stalls, spins and recovers from a spin. Tried also landing using different approach angles and speeds on a grass field and had a blast. Well done!

Minor grunt (applicable to all GAS creations I have so far): Internal texturing is a bit blunt. Not so important for an open cockpit biplane like the Stampe but it is a point where there is room for improvement in your creations imho and will add to the immersion of flying these classics.

Keep up the good work!

[Spad54]

I really like the flight dynamics in this plane. Never flown one but they are believable. I like the way it stalls, spins and recovers from a spin. Tried also landing using different approach angles and speeds on a grass field and had a blast. Well done!

Minor grunt (applicable to all GAS creations I have so far): Internal texturing is a bit blunt. Not so important for an open cockpit biplane like the Stampe but it is a point where there is room for improvement in your creations imho and will add to the immersion of flying these classics.

Keep up the good work!

Thanks for the comment. We've had discussions around just that and expect more detailed textures in the future.

[Dumonceau]

Thanks for the comment. We've had discussions around just that and expect more detailed textures in the future.

Brilliant news! I love how you listen to input of the community! :very_drunk:

Cheers,

Johan

[speedy70]

Hi Johan
I purchased as soon as your first post went up for the stampe offer,paid by PayPal and all is fine but I do not have the two patches.
Any chance of a link to them.
Cheers Chris

original purchase 26 May

[Dumonceau]

Hi Johan
I purchased as soon as your first post went up for the stampe offer,paid by PayPal and all is fine but I do not have the two patches.
Any chance of a link to them.
Cheers Chris

original purchase 26 May

It's a cummulative patch: http://goldenagesimulations.com/GAS/Stampe_Patch.zip

Johan

[speedy70]

Thanks Johan that was quick.

Cheers Chris

[Dumonceau]

Coming from someone called Speedy, that is high praise indeed!! ;)

Johan