Boeing 787 Released

[Trans_23]

Hiroshi Igami of Project Opensky/SkySpirit fame, has released a Boeing 787. No panel, VC, or custom sounds but the model looks fantastic. Paintkit and GenX engines are still in the works. This plane is being released under the name "Tenkuu Development Studio" or TDS.

Available for download at Flightsim.com
tds788trent_ana_ja807a.zip (http://www.flightsim.com/vbfs/fslib.php?do=copyright&fid=173919)

[stuartcox]

Thanks for the HU!
This model is mind blowingly good! Just look at the detailed undercarriage with hydraulic lines, and the inside of the doors and cargo bays!
Just stunning how much detail was implied - definitely a winner!
Thanks, Stuart

[Matt Wynn]

i don't normally fly airliners...but.... wow, this one's nice.... once they release that paintkit i'll be working on a fictitious RAF 'Vantage' CC.Mk 2 :icon_lol:

[Txmmy83]

and I think near all VA's will start using 787 as part of their Fleet :ernae:

what is the best sound to use with 787?

[Matt Wynn]

any Trent series sound (800 series works best) should suffice at the moment...

[Txmmy83]

thanks Matt will try :)

test flying the 787 on route LIMC-EGKK at the moment

does anybody tried to add A2A 3D Lights into this 787?

[Blackbird686]

once they release that paintkit i'll be working on a fictitious RAF 'Vantage' CC.Mk 2 :icon_lol:

YES!!.... :salute:

I normally stay away from "tubes" as well... but THIS is a real BEAUTY. Reckon I'll be starting a virtual airline here pretty soon.

It seems that the link to Flightsim has quit working, so I would recommend just going over there, and search Trent 800 in their FS 2004 Sounds section. The sound file I'm using has 2 parts, the main file and an update, which I think is worth the effort. Until TDS finishes the panel for the 787, you cannot shut off the APU or the electrical with the provided panel. However the panel it uses is perfect for flight, and man, does this thing fly nice!

BB686:USA-flag:

[Txmmy83]

@Board Moderators

this Boeing deserves to be a Sticky Topic

[stuartcox]

Anybody tried to add A2A 3D Lights into this 787?

Yes, quite tricky!
I only added landing/taxi lights, as all others are fine and wouldn't work with flexi-wings anyway!


light.6 = 5, 9.9, -11, -4, fx_shockwave_landing_light_narrow
light.7 = 5, 9.9, 11, -4, fx_shockwave_landing_light_narrow
light.8 = 5, 56.3, 0, -11.7, fx_shockwave_landing_light_double_small

Stuart

(I try to avoid the Xenon lights, they are too bright for my liking)

[Navtech]

Nice model .. nice texture :applause: .. but it's stop there :icon_lol:
Seems able to climb at 10000 Ft/min .. :isadizzy:
Methink the flight model need .. at least some improvement :icon_eek:

[Tom Clayton]

Nice - thanks Dan! I'd love to see a freighter version, but knowing how Hiroshi thinks, it won't happen until Boeing does it.

[Matt Wynn]

Nice - thanks Dan! I'd love to see a freighter version, but knowing how Hiroshi thinks, it won't happen until Boeing does it.

won't stop me painting a door on it though as i'll have to when they release the paintkit so i can do my Fictional RAF 'Vantage' CC. Mk 2 :icon_lol:

[Trans_23]

Nice model .. nice texture :applause: .. but it's stop there :icon_lol:
Seems able to climb at 10000 Ft/min .. :isadizzy:
Methink the flight model need .. at least some improvement :icon_eek:

I have heard the same thing but their group on Facebook has a lot of the old Posky Romper Room crowd there so you dare not contest it. Hopefully, someone will fix it.

[Blackbird686]

The jet does seem a little on the "hot" side at low altitude. I know nothing about how it should fly, or how the real one does. The rate of climb indicates that it has a lot of power, but my "Loach" Boeing 737-400 will climb fairly aggressively too. Not at the rate of the 787, but it will boogie along if you push it.

The 787 cruises very nicely at 40,000 feet... hmmm. About 25% throttle at nearly 370 KIAS... it's really easy to overspeed the plane, but the higher you take her, the easier it is to cruise. Anyone know the maximum service ceiling for the real plane...?

BB686:USA-flag:

[AndyG43]

The jet does seem a little on the "hot" side at low altitude. I know nothing about how it should fly, or how the real one does. The rate of climb indicates that it has a lot of power, but my "Loach" Boeing 737-400 will climb fairly aggressively too. Not at the rate of the 787, but it will boogie along if you push it. The 787 cruises very nicely at 40,000 feet... hmmm. About 25% throttle at nearly 370 KIAS... it's really easy to overspeed the plane, but the higher you take her, the easier it is to cruise. Anyone know the maximum service ceiling for the real plane...?BB686:USA-flag:According to Wiki, service ceiling is 43000 feet.

https://en.wikipedia.org/wiki/Boeing_787_Dreamliner#Specifications

Re. the questions about rate of climb, to an extent that is a "how long is a piece of string" question, dependent on whole range of factors from load to altitude; however, most references I've seen estimate the 777 climb rate to be about 3500 ft/min at sea level, dropping to about 300 ft/min altitude - all things being equal, I'd expect the 787 to be in that ballpark, anything more than 4000 ft/min would be pushing it. If this one is doing 10000, as per Navtech's post, then the FDE probably needs some serious attention.

[Trans_23]

Nice - thanks Dan! I'd love to see a freighter version, but knowing how Hiroshi thinks, it won't happen until Boeing does it.

Not anymore it seems. He has also released Boeing's unreleased 777-8 and 9x.

[Trans_23]

The paint kit was released this morning. Should be on flightsim.com. New flight dynamics were released a week or two ago along with the GenX model.

[Matt Wynn]

The paint kit was released this morning. Should be on flightsim.com. New flight dynamics were released a week or two ago along with the GenX model.

eeeeexcellent! *runs off to paint shed* :icon_lol:

[Matt Wynn]

ok... it has begun..... i've added a fictional Cargo Door!

http://i184.photobucket.com/albums/x270/mattwynn/TDS787_fuselage_master_public_zps77649f59.jpg

[thunder100]

HIJACK

is there any way to contact Hiroshi for an non Facebook user?

While the RR flys perfect(apart FDE-power) in FSX (with Default 787-800 Panel+ tewaks) the given GE FSX model will not work at all.

Of course you can always use RR and rename the engine textures,but he may not be Aware of that fact

Thanks

Roland

[Matt Wynn]

well.... first 2 are nearly off the books....

http://i184.photobucket.com/albums/x270/mattwynn/2013-8-1_11-8-0-294_1_zps50e04873.jpg~original

just about to clear the paint shed, a Fictional RAF variant, which i've dubbed 'Vantage' (seeing as the A330MRTT is the 'Voyager'):
http://i184.photobucket.com/albums/x270/mattwynn/Vantage_zpsc8666140.jpg~original

[AndyG43]

You should call it the "Victoria" Matt; the name has an RAF pedigree and, as it would probably be an interminable hangar queen, a royal name seems apt!! ;-)

[Matt Wynn]

:icon_lol::icon_lol: i toyed with 'Victoria' , 'Vantage', 'Vista'... but a buddy of mine decided it for me :icon_lol:

... now to fire up a formation with Fire Trucks....

taken in FSX but here's the 'Vantage' in flight (Same texture resolution as FS9)...

http://i184.photobucket.com/albums/x270/mattwynn/2013-8-1_13-0-13-439_zps17b1a5ab.jpg~original

[Blackbird686]

You know... I have the 787, sitting in a hangar still dressed in house colours. That RAF scheme would sure look good on her... and would get the juices flowing to light her up and give her a few "assignments"...:salute: Beautiful work, Matt! :guinness:

BB686:USA-flag:

[Trans_23]

HIJACK

is there any way to contact Hiroshi for an non Facebook user?

While the RR flys perfect(apart FDE-power) in FSX (with Default 787-800 Panel+ tewaks) the given GE FSX model will not work at all.

Of course you can always use RR and rename the engine textures,but he may not be Aware of that fact

Thanks

Roland
Check the title line in the Aircraft.cfg file. In FSX is is limited to 127 characters. I think the initial release for the GenX model had to many characters.

[PeteHam]

I'm liking this model although it seems it has way too much power.

Some nice textures appearing as well.

I've cut the power back a bit in the aircraft cfg ......

[jet_engine]
thrust_scalar = 1.00 ( back from 1.24 )

But it probably needs some better tweaking to sort the over power issue.

Looking forward to your new paints Matt.

Pete.

[CG_1976]

Eh matt very nice RAF 787. Would you be up to a USCG paint 787 please. I want to show off the USAF and tick them off, could be worse I might call for a USMC 787 lol.

[ViperPilot2]

Matt,

Thanks for all of the hard work with these repaints! I bet it takes some time for each one, and they look great!

May I please put in a request for a USAF repaint? Something generic with your 'cargo' mod would work awesome. Of course, if you'd like to make it a COANG livery... that would be the ultimate!

Thanks again!

Alan 91424

[Matt Wynn]

i'll see what i can come up with :salute:

[thunder100]

Check the title line in the Aircraft.cfg file. In FSX is is limited to 127 characters. I think the initial release for the GenX model had to many characters.

thanks I'll give it a try:is a bit of problem though as the title triggers the texture apperance

Roland

[ViperPilot2]

i'll see what i can come up with :salute:

Many thanks again, Matt!

:wavey:

[Tom Clayton]

thanks I'll give it a try:is a bit of problem though as the title triggers the texture apperance

Roland
Check the readme - as long as you have the correct code string, you should be OK.