Alphasim Gripen

[ZsoltB]

http://iaro.3dmax.hu/kep/tigerrr.jpg

[Daube]

For some reason I never get the picture complete. It loads just a bit more everytime I refresh the page :P

[anatolpopov]

Looks good. Gripen is maybe coolest aircraft ever.. After Extra 300...

[Xilence]

Didn't get it complete here either. Even when I download the picture it has more than half of it in grey...

[Henry]

corrupt JPG!
H

[Ferry_vO]

I have no problem seeing the screenshot, I'll try to attach it here:

BTW Zsolt: Great repaint! :ernae:

[1970LT1]

Will it be uploaded?!

LT1

[Wombat_VC]

The Alphasim Gripen has a stucked-afterburner problem with my FSX setup (Acceleration). It will engage when the throttle is pushed to the full but refuse to disengage until I pull back to less than 50%.

[ZsoltB]

The Alphasim Gripen has a stucked-afterburner problem with my FSX setup (Acceleration). It will engage when the throttle is pushed to the full but refuse to disengage until I pull back to less than 50%.

Unfortunately, yes! And the same is true of Alphasim's EFA too!

[merida72]

is it on flightsim?

[Cleartheprop]

jpeg seems corrupted.....

[fsafranek]

The Alphasim Gripen has a stucked-afterburner problem with my FSX setup (Acceleration). It will engage when the throttle is pushed to the full but refuse to disengage until I pull back to less than 50%.
Is there a fix for that? I'm not sure they were intended
for Acceleration but it would be nice to get that fixed.
:ernae:

[swimeye]

I have removed this line from my panel config:
gauge29=ALPHA_Gripen!autotoggle_AB, 0,0,10,10

Cannot remember if that does the trick but i dont have the problem you mention. :jump:

[peter12213]

I can fix the sticking throttle problem, just remove the line stated above that controls the afterburner effect, and add the KO_F16_FX gauge, here >> 8683

Then add this to the panel.cfg,

[Vcockpit xx<--Next one in panel.cfg]
Background_color=0,0,0
size_mm=32,32
visible=0
pixel_size=32,32
texture=$exhaust
gauge00=KO_F16_FX!F16_AB_THROGGLE, 0,0,1,1

= No more sticky throttles and no missing burner effects ever again!

[ZsoltB]

http://img245.imageshack.us/img245/5405/tigerrr.jpg

[fsafranek]

The Alphasim Gripen has a stucked-afterburner problem with my FSX setup (Acceleration). It will engage when the throttle is pushed to the full but refuse to disengage until I pull back to less than 50%.
Find the [TurbineEngineData] section of the "aircraft.cfg" file and add the
following line. It seems to work for the F-104. Might work here as well.



[TurbineEngineData]
afterburner_throttle_threshold = 0.00

[merida72]

I have the same problem with the Alpha Typhoon FSX, some of you have solved?

I followed the same procedures but without results...

[peter12213]

I have the same problem with the Alpha Typhoon FSX, some of you have solved?

I followed the same procedures but without results...

Merida follow my guide, firstly you must remove the afterburner gauge from the panel.cfg I have forgotten what it is called, then apply the steps I have stated earlier!

[merida72]

thanks for the reply Peter

but doesn't want to work

I ran your advice to the letter but doesn't work

[merida72]

test test

[Warrant]

I mentioned the image uploads by zsoltquack a while ago already. The images are too large by much for those with a slow to average connection or a low end computer. I already suggested back then to upload images much smaller in size.:rolleyes:

Too bad i was talking to the wind :sheep:, the images by zsoltquack are actually very good but a bit hard to enjoy!

[mirage3]

does anyone know if the gripen is now frreware???????????????????????????:173go1:

[hschuit]

does anyone know if the gripen is now frreware???????????????????????????:173go1:

Not yet....

http://www.pcaviator.com/store/product.php?productid=18604&cat=0&page=1

[fsafranek]

As hschuit stated is is still payware from Virtavia. But there are a couple FS9 era freeware examples available by Kazunori Ito or Thinus Pretorius.
:ernaehrung004:

[mirage3]

but on "URL removed" it is freeware

[huub vink]

but on "URL removed" it is freeware

So that is most likely a case of piracy.....

Therefore I removed the link.

Cheers,
Huub

[Dangerousdave26]

If it were freeware it would be on Virtavia's site.

http://www.virtavia.com/Freeware/index.php

[mirage3]

Ok excuse me

[fsafranek]

but on "URL removed" it is freeware
I missed something. What is "URL removed"? A website somewhere or a status?

Whether it is still listed in a store or not, Alphasim/Virtavia products are never freeware unless listed and downloadable from their freeware page (http://www.virtavia.com/Freeware/index.php). And even then, things have been put up there accidentally and quickly removed.

As I read what I wrote I don't mean to sound like a hardass. Just because something is not available as payware somewhere doesn't mean it is now freeware. Especially Alphasim/Virtavia products and how they were developed at the time.
:ernaehrung004:

[Dangerousdave26]

I missed something. What is "URL removed"? A website somewhere or a status?




It was a link to a site that Huub removed. mirage3 mistakenly thought it was freeware on a site someplace. Contact Huub if you want to know where. I never saw the link.