Typhoon Willy
July 2nd, 2009, 07:56
Hi all,
I was planning to prepare a .dp for an FS9 plane I converted for use in CFS2 (AlphaSim Jaguar) and borrowed a .dp from an older Alpha Jag. This already had 2 guns but I want to be able to add ordnance and understand for them to work properly, additional gunstations need to be added.
I was looking at the default .dp file but don't understand what all the values represent and was wondering if someone out there could explain these to me?
[GUNSTATIONS]
gunstation.0=0,24,1,0.05,811,2,0.02,500,0,40,1d1*8 ,-2.019,-0.455,0,-0.128056,0,0.38560350701058,0,0,0,0,0.344
gunstation.1=0,31,1,0.05,811,2,0.02,500,0,40,1d1*8 ,2.019,-0.455,0,-0.128056,0,-0.38560350701058,0,0,0,0,0.344
gunstation.2=2,-2,4,0.00,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
gunstation.3=3,21,8,0.00,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0
gunstation.4=5,62,32,0.00,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0
[guns.0]
gun.0=350,-0.907,0.1,0.943,0,0,1,350
gun.1=350,-1.932,0.219,0.828,0,0,1,350
[guns.1]
gun.0=350,0.907,0.1,0.943,0,0,1,350
gun.1=350,1.932,0.219,0.828,0,0,1,350
[guns.2]
gun.0=10,0,0,0,0,0,0,0
[guns.3]
gun.0=1,0,0,0,0,0,0,0
[guns.4]
gun.0=1,0,0,0,0,0,0,0
The following are the gunstation entries for the Jag dp I am using:
[GUNSTATIONS]
; Port Cannon
gunstation.0=1,-3,2,0.05,1200,5,0.05,25,4,100,1d1*300,-0.5,-0.95,3.1,0,0,0,0,0,0,0,50
; Starboard Cannon
gunstation.1=1,-5,2,0.05,1200,5,0.05,25,4,100,1d1*300,0.5,-0.95,3.1,0,0,0,0,0,0,0,50
; Bomb
gunstation.2=2,21,4,0,0,0,0,0,0,0,1d1*300,0,0,0,0, 0,0,0,0,0,0,50
;
gunstation.3=3,-99,8,0,0,0,0,0,0,0,1d1*8,0,0,0,0,0,0,0,0,0,0,800
[guns.0]
gun.0=500,0,0,0,0,0,1,500
[guns.1]
gun.0=500,0,0,0,0,0,1,500
[guns.2]
gun.0=8,0,0,0,0,0,0,8
[guns.3]
gun.0=4,0,0,0,0,0,0,4
Thanks in advance,
TW
I was planning to prepare a .dp for an FS9 plane I converted for use in CFS2 (AlphaSim Jaguar) and borrowed a .dp from an older Alpha Jag. This already had 2 guns but I want to be able to add ordnance and understand for them to work properly, additional gunstations need to be added.
I was looking at the default .dp file but don't understand what all the values represent and was wondering if someone out there could explain these to me?
[GUNSTATIONS]
gunstation.0=0,24,1,0.05,811,2,0.02,500,0,40,1d1*8 ,-2.019,-0.455,0,-0.128056,0,0.38560350701058,0,0,0,0,0.344
gunstation.1=0,31,1,0.05,811,2,0.02,500,0,40,1d1*8 ,2.019,-0.455,0,-0.128056,0,-0.38560350701058,0,0,0,0,0.344
gunstation.2=2,-2,4,0.00,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
gunstation.3=3,21,8,0.00,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0
gunstation.4=5,62,32,0.00,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0
[guns.0]
gun.0=350,-0.907,0.1,0.943,0,0,1,350
gun.1=350,-1.932,0.219,0.828,0,0,1,350
[guns.1]
gun.0=350,0.907,0.1,0.943,0,0,1,350
gun.1=350,1.932,0.219,0.828,0,0,1,350
[guns.2]
gun.0=10,0,0,0,0,0,0,0
[guns.3]
gun.0=1,0,0,0,0,0,0,0
[guns.4]
gun.0=1,0,0,0,0,0,0,0
The following are the gunstation entries for the Jag dp I am using:
[GUNSTATIONS]
; Port Cannon
gunstation.0=1,-3,2,0.05,1200,5,0.05,25,4,100,1d1*300,-0.5,-0.95,3.1,0,0,0,0,0,0,0,50
; Starboard Cannon
gunstation.1=1,-5,2,0.05,1200,5,0.05,25,4,100,1d1*300,0.5,-0.95,3.1,0,0,0,0,0,0,0,50
; Bomb
gunstation.2=2,21,4,0,0,0,0,0,0,0,1d1*300,0,0,0,0, 0,0,0,0,0,0,50
;
gunstation.3=3,-99,8,0,0,0,0,0,0,0,1d1*8,0,0,0,0,0,0,0,0,0,0,800
[guns.0]
gun.0=500,0,0,0,0,0,1,500
[guns.1]
gun.0=500,0,0,0,0,0,1,500
[guns.2]
gun.0=8,0,0,0,0,0,0,8
[guns.3]
gun.0=4,0,0,0,0,0,0,4
Thanks in advance,
TW