RAAF Base Richmond released

[scotth6]

Another great RAAF scenery by Flightsimdev (aka Lawrence Nichols) is available via his own website.

This time it's RAAF Base Richmond, which is located not far from Sydney, Australia.

https://flightsimdev.com/


Cheers,

[Stickshaker]

Thank you, Lawrence! The screenshots look very nice. Downloading now.

[AussieMan]

Thanks mate. This will be a great addon.

[strykerpsg]

Thanks for the headsup! Nice military scenery indeed!

[jmbiii]

Thank you, Lawrence! Goes well with your Williamtown and Pearce!

[COBS]

Thank you, Lawrence for making these wonderful versions of military airbases ,
your superb efforts are greatly appreciated .


I ran the default Richmond before I loaded yours , what a world of difference ,
yours is stunning .
I now have 4 of your RAAF airbases ,
YAMB - Amberley
YWLM - Williamtown
YSRI - Richmond
and
YPEA - Pearce


The first 3 being in reasonably close proximity to each other make for great fights using them .
Love them all , but Amberley remains my personal favorite.

Cheers
Karol
http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=63989&stc=1
http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=63990&stc=1

[paul day]

Hi Karol
Could you tell me where I can download a copy of RAAF Amberley from this developer because that is the RAAF base I really need.

Regards Paul Day.

[flightsimdev]

Thank you, Lawrence for making these wonderful versions of military airbases ,
your superb efforts are greatly appreciated .


I ran the default Richmond before I loaded yours , what a world of difference ,
yours is stunning .
I now have 4 of your RAAF airbases ,
YAMB - Amberley
YWLM - Williamtown
YSRI - Richmond
and
YPEA - Pearce


The first 3 being in reasonably close proximity to each other make for great fights using them .
Love them all , but Amberley remains my personal favorite.






Cheers
Karol
http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=63989&stc=1
http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=63990&stc=1




You guys are very welcome, and thank you so much for the comments I work hard on making these look life like but not accurate at the same time, Currently working on a remake of Amberley and at the same time doing RAAF Base Edinburgh in South Australia, its going to take some time expect it late 2019 early 2020.

You guys will be the first to be informed, this time around I will release things in stages, part 1 2 3 4 5 etc, so you can see it grow as I do.

Don't forget to visit my website from time to time flightsimdev.com

Cheers
Lawrence

[flightsimdev]

Hi Karol
Could you tell me where I can download a copy of RAAF Amberley from this developer because that is the RAAF base I really need.

Regards Paul Day.


Amberley is not downloadable atm, I had issues on flightsim.com and took it down, I could build it up for you and give you a copy but it's in bits will take me a couple of days to remake those bits, I'll see what I can do, but it was only FS9 models made to work in FSX, wouldn't work in P3D at all

[jmbiii]

"Amberley is not downloadable atm, I had issues on flightsim.com and took it down, I could build it up for you and give you a copy but it's in bits will take me a couple of days to remake those bits, I'll see what I can do, but it was only FS9 models made to work in FSX, wouldn't work in P3D at all "


Lawrence,

I presently have your YAMB installed on my FltSim. It appears to work very well. I have watched aircraft take off and land and have not noticed any thing untoward with the scenery.
P3Dv3 with Orbx Australia, FTX Base, FTX Vector, etc.
https://i.imgur.com/7SWNBHc.jpg


However I do have a problem with YWLM - most of the asphalt and concrete has been removed ! The grass is well maintained, though.

https://i.imgur.com/QyqZHFy.jpg

https://i.imgur.com/bEAfl1X.jpg

[flightsimdev]

"Amberley is not downloadable atm, I had issues on flightsim.com and took it down, I could build it up for you and give you a copy but it's in bits will take me a couple of days to remake those bits, I'll see what I can do, but it was only FS9 models made to work in FSX, wouldn't work in P3D at all "


Lawrence,

I presently have your YAMB installed on my FltSim. It appears to work very well. I have watched aircraft take off and land and have not noticed any thing untoward with the scenery.
P3Dv3 with Orbx Australia, FTX Base, FTX Vector, etc.
https://i.imgur.com/7SWNBHc.jpg


However I do have a problem with YWLM - most of the asphalt and concrete has been removed ! The grass is well maintained, though.

https://i.imgur.com/QyqZHFy.jpg

https://i.imgur.com/bEAfl1X.jpg


Looks to me the photoreal is non existent try moving the scenery up in FSX above ORBX

Lawrence

[jmbiii]

Ah, but the scenery 'tis way above any ORBX scenery.
What is the photoreal .bgl name ? I have looked for it, but . . .
(perhaps the lads that maintain the lawns took it as they wanted a bit more job security !)

[jeansy]

Ah, but the scenery 'tis way above any ORBX scenery.
What is the photoreal .bgl name ? I have looked for it, but . . .
(perhaps the lads that maintain the lawns took it as they wanted a bit more job security !)

if you can and know how to, open Scruffy duck's ADE and open the afcad file, sometimes with p3d v3 taxiways and aprons become invisible you just need to check the afcad and see if the the draw surface is ticked or not, lots of fsx Afcads both payware and freeware have this problem in p3d v3 onwards

it might be as simple as that

[jmbiii]

Thanks Matt, that wasn't it. All aprons and taxiways were checked properly. I started looking around and found six landclass files up in C dirve where the installer placed them, I moved them to proper folder and all is well.
(they were each labeled - LC, so I guess the grounds maintenance lads thought it meant 'lawn care' and put them away for their use:confused: :highly_amused:)

[jeansy]

glad you sorted it relatively easy

[flightsimdev]

Thanks Matt, that wasn't it. All aprons and taxiways were checked properly. I started looking around and found six landclass files up in C dirve where the installer placed them, I moved them to proper folder and all is well.
(they were each labeled - LC, so I guess the grounds maintenance lads thought it meant 'lawn care' and put them away for their use:confused: :highly_amused:)







I asked the guys at flightsim.com to change the installer uploaded! did it get done? NO, has it ever been done? NO, is the one their now the updated one I gave them? NO, this is why I don't use FS.com anymore! plus the fact they slow download speeds, the first installer had issues and didn't add it to your sim correctly, many of the bad installers got shared around, no one ever contacted me directly but would prefer to just say bad things on forums.

The corrected version is on my website NEW installer was made TODAY is only done because I keep hearing the same issues over and over.

Depending where you install it, all you'll have to do is move the effects to where your FS/P3D effects folder is located, nothing has changed apart from maybe the dates and names of the files, the link on my website should be updated in about an hour.

Regards
Lawrence

[jmbiii]

That's great, Lawrence. The installer I had/have offered to install where ever I wanted. However it would not let me chose any thing but C drive.
So I installed to C then moved the file/folders to my P3D drive. I missed the Scenery/Global/scenery folder. It only took me a little while looking
for a photo scenery file to realize what I'd missed.
Again many thanks for Richmond, Williamtown, Amberley, Pearce, Point Cook, etc. I'll probably never get to Oz, but with mates like you, Ant, ORBX
and Google Earth, I can visit any time I wish. (and no 16 hour flight to get there:applause:)

Joe