CP-140 KBT Aurora

[brausch]

Hey fella's I have been trying to contact Hiroaki to request a couple small changes to his base P-3 model,..am asking for the standard CP-140 and the newer Block 1 variant with wingtip sensors both with wing weapons pilons removed. Does anyone have contact with him ,...I dealt with Hiroaki when we put together the P-3K2 Variant pack but he is not responding to emails I have sent ?

Here are the thumbs from some paints I have prepared for her,...

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=52222&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=52221&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=52224&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=52225&stc=1

AB

[iflyfsx214]

Did you ever get in contact/permission with Hiroaki to modify the model

[kbt]

Very cool:applause:
I noticed this thread right now. If it is a simple refurbishment, I will create your aurora. This time it is special.

Hiroaki

[kbt]

Should I proceed?:running:


http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=59097&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=59099&stc=1

[paul day]

YES
Looking forward to another P-3 model and some good looking repaints.

Regards Paul Day.

[wombat666]

Yes please Hiroaki.
An important member of the P3 family.
And 'Thank you'.
:encouragement:

[kbt]

Trial production

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=59112&stc=1

[gavinc]

Looking very nice.
Always enjoyed flying your P-3 series of aircraft.

thanks
Gavin

[brausch]

Heya I will get the Paints to you later today hopefully if you would like to include them in the package :)

[kbt]

The CP 140 seen in the picture is almost complete.
After completing the light assignment, it is complete.


http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=59190&stc=1

[kbt]

I saw the CP-140 texture painted by Adrian. It became pretty good-looking CP-140.:applause:


http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=59192&d=1521879502

[kbt]

Finished making the CP140.

(https://drive.google.com/open?id=1cKeEl1_QO4ahu4r7ZZW8Dw-Pe64lyxhu)
http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=59200&stc=1

There is no ReadMe and a file describing the explanation.
Please place "Canadair CP-140 Aurora FSX" appearing after opening the file in the same folder as "P-3C ORION FSX".

https://drive.google.com/open?id=1cKeEl1_QO4ahu4r7ZZW8Dw-Pe64lyxhu

[kbt]

Finished making the CP140.

There are similar threads, but both can download the same CP 140.

(https://drive.google.com/open?id=1cKeEl1_QO4ahu4r7ZZW8Dw-Pe64lyxhu)
http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=59200&stc=1

There is no ReadMe and a file describing the explanation.
Please place "Canadair CP-140 Aurora FSX" appearing after opening the file in the same folder as "P-3C ORION FSX".


https://drive.google.com/open?id=1Es_w2FHC3PcGlJuQeSfyxr3cbnr0f3EA

[Seahawk72s]

Thank you for the very fine detailing with the model and excellent paint schemes...:encouragement:

[scotth6]

Thanks very much to all involved. Another great addition!

[kbt]

https://drive.google.com/open?id=1C_0G3hbgWqYNo-RU9r25YPMvuersezBV

Those who have already obtained "cp-140_ab_kbt_fsx_p3dv4.zip" in P3D thread are not necessary.

[tommieboy]

One of the original requests was to remove the weapons pylons for this Canadian variant. I still see they are still included with this model. Just an observation.

Tommy

[Aharon]

Is this new model base or can I use liveries for my existing KBT products?

[IFlySWA]

Anyone planning a repaint like this?:cool:
http://www.airliners.net/photo/Canada---Air/Lockheed-CP-140-Aurora/2285252/L?sid=7c377af29542e8b00aef0988c45eeff2

Brian

[kbt]

One of the original requests was to remove the weapons pylons for this Canadian variant. I still see they are still included with this model. Just an observation.

Tommy


It is easy if that is the case. I'll do it soon.:wavey:

[kbt]

Is this new model base or can I use liveries for my existing KBT products?

It is possible to use existing P3C textures, but this model is CP-140.
Moreover, I think that it is difficult to repaint the color of the antenna arbitrarily.
We may release the P-3C model later in the same version as CP 140.

[kbt]

Anyone planning a repaint like this?:cool:
http://www.airliners.net/photo/Canada---Air/Lockheed-CP-140-Aurora/2285252/L?sid=7c377af29542e8b00aef0988c45eeff2

Brian

It is already existing.
http://www.sim-outhouse.com/sohforums/showthread.php/20430-CP-140-Aurora-for-FSX-too

[kbt]

cp140 model removed pylons

https://drive.google.com/open?id=1Qjr6zUDpRk1uwo3e7-AoKPJzaNsJjC0O (https://drive.google.com/open?id=1Qjr6zUDpRk1uwo3e7-AoKPJzaNsJjC0O)

Installation
Just pay attention to the file name and replace the model file.

We plan to update the CP-140 equipped with this model at a later date.

[IFlySWA]

It is already existing.
http://www.sim-outhouse.com/sohforums/showthread.php/20430-CP-140-Aurora-for-FSX-too

Thanks! :biggrin-new:

Brian

[Aharon]

It is possible to use existing P3C textures, but this model is CP-140.
Moreover, I think that it is difficult to repaint the color of the antenna arbitrarily.
We may release the P-3C model later in the same version as CP 140.

Thanks for reply and nice to meet you, Mr. KBT!! I have flown many of your KBT Electra products for Buffalo Airways virtual airline!! I also have flown your P-3 models too.

Looking forward to your new CP-140 on avsim or flightsim when you finish your last minute adjustments.

One question: on one of Buffalo Airways virtual airline Electra models, it cannot do tight backtracking on single runway without running into snow or grass. Where in aircraft.cfg can I adjust so that it can do proper backtracking at beginning or end of runway, please as Buffalo Airways uses Electras on very small airports' single runways.

Regards,

Aharon

[Lonewolfee1]

Is this the link to the correct P3C Orion FSX base Model needed?

http://www.sim-outhouse.com/sohforums/local_links.php?catid=37&linkid=18608

[kbt]

Thanks for reply and nice to meet you, Mr. KBT!! I have flown many of your KBT Electra products for Buffalo Airways virtual airline!! I also have flown your P-3 models too.

Looking forward to your new CP-140 on avsim or flightsim when you finish your last minute adjustments.

One question: on one of Buffalo Airways virtual airline Electra models, it cannot do tight backtracking on single runway without running into snow or grass. Where in aircraft.cfg can I adjust so that it can do proper backtracking at beginning or end of runway, please as Buffalo Airways uses Electras on very small airports' single runways.

Regards,

Aharon

If you retreat without using pushback, use thrust reverse, but there is no steering effect. It will be impossible on the specification of FS.




[GeneralEngineData]
engine_type = 5
Engine.0 = 0.167, -20.500, 0.833
Engine.1 = 2.500, -10.250, 1.000
Engine.2 = 2.500, 10.250, 1.000
Engine 3 = 0.167, 20.500, 0.833
fuel_flow_scalar = 0.430
min_throttle_limit = -0.289915 // Minimum percent throttle. Generally negative


Increasing the value of 　"min_throttle_limit = - 0.289915" 　to the minus side retreats, but the brakes work strongly. (Use F2 key)


[TurbineEngineData]
fuel_flow_gain=0.011
inlet_area=1.0
rated_N2_rpm=29920.000
static_thrust=3078.000
reverser_available = 1　←　Please experiment to see if it can be used with TurbineEngine.

[Aharon]

Mr. KBT,

Thanks for your kind answer and I look forward to download your new CP-140 with awesome Canadian liveries when you finish final adjustments on it.

Regards,

Aharon

[kbt]

Is this the link to the correct P3C Orion FSX base Model needed?

http://www.sim-outhouse.com/sohforums/local_links.php?catid=37&linkid=18608


It is correct.:encouragement:

[tommieboy]

WOW....that was fast!

Installed it; looks great!

Thanks,

Tommy


cp140 model removed pylons

https://drive.google.com/open?id=1Qjr6zUDpRk1uwo3e7-AoKPJzaNsJjC0O (https://drive.google.com/open?id=1Qjr6zUDpRk1uwo3e7-AoKPJzaNsJjC0O)

Installation
Just pay attention to the file name and replace the model file.

We plan to update the CP-140 equipped with this model at a later date.

[iflyfsx214]

Is there a p-3 model with weapons/missiles like in this picture http://myhobbycraft.blogspot.com/2010/03/p-3c-orion-1144.html?m=1 also is there a away to fix the problem with once I release the parking brakes the aircraft creeps forward without any throttle input

[kbt]

Is there a p-3 model with weapons/missiles like in this picture http://myhobbycraft.blogspot.com/2010/03/p-3c-orion-1144.html?m=1 also is there a away to fix the problem with once I release the parking brakes the aircraft creeps forward without any throttle input



There is currently no model with armed weapons.
An fast solution to the problem of going ahead is to keep the lever of the mixture control neutral or lower.

Thank you

[alain0568]

Hello KBT,

-Thank you for these new versions and decorations of the P-3!
However, I would like to find the old vc on the new FSX models!


This vc in the new models FSX?

https://i62.servimg.com/u/f62/19/20/05/09/pit_p311.jpg (https://servimg.com/view/19200509/26)

Is it possible ?
Thank you!

Alain

-

[kbt]

Hello KBT,

-Thank you for these new versions and decorations of the P-3!
However, I would like to find the old vc on the new FSX models!


This vc in the new models FSX?

https://i62.servimg.com/u/f62/19/20/05/09/pit_p311.jpg (https://servimg.com/view/19200509/26)

Is it possible ?
Thank you!

Alain

-

I lost the source of that VC model.
Rebuilding the VC you indicated is difficult.

[alain0568]

Hello Kbt,

-Thank you for your reply!
It's really a shame!
Maybe you could improve the panel vc, creating new possibilities to add some gauges-because now we can not add anything !!!: ((
For example:
-position indicator landing gear
-position of flaps
-control opening of traps of the bomb bay / torpedo
-AOA indicator,
-and 4 switchs on the top left of the panel:yoke,gps ,auto pilot,.....
-Various icons, radios, map, etc ...(-like the first version!)
Thank you for your work.
cordially


Alain

[iflyfsx214]

Hello KBT,

-Thank you for these new versions and decorations of the P-3!
However, I would like to find the old vc on the new FSX models!


This vc in the new models FSX?

https://i62.servimg.com/u/f62/19/20/05/09/pit_p311.jpg (https://servimg.com/view/19200509/26)

Is it possible ?
Thank you!

Alain

-

What if we merge the old VC with the current models, wouldn't that work?

[kbt]

What if we merge the old VC with the current models, wouldn't that work?

Answer. Can not be merged.:jump:

[kbt]

Lockheed CP-140 Aurora for FSX and P3Dv4 V1.1
ABOUT THE V1.1
Fixed the light switch.
Fixed changes in lighting day and night.
Deleted wing pylon.
https://drive.google.com/open?id=1XH...WMTyxkmlc2E7kr (https://drive.google.com/open?id=1XHHjLluJkeOOw-D_MeWMTyxkmlc2E7kr)


Correction data only
https://drive.google.com/open?id=1KJ...D6Zrs6mBdtm_Yy (https://drive.google.com/open?id=1KJ4aaHn7CYQ6cJ5U-oD6Zrs6mBdtm_Yy)

[iflyfsx214]

Is there a place, a website where we can download all the released models all in one place

[kbt]

Is there a place, a website where we can download all the released models all in one place

I forgot to introduce it to everyone.
Although the sentence is Japanese, I think that the category is easy to understand.
Please come.

FS KBT
https://viperhiro.wordpress.com/

[iflyfsx214]

I forgot to introduce it to everyone.
Although the sentence is Japanese, I think that the category is easy to understand.
Please come

FS KBT
https://viperhiro.wordpress.com/

Thank You but the T-4 FSX and the Lockeed P-3 Series FSX links doesn't work, Im getting an error saying "this item might not exist or no longer available"

[kbt]

Thank You but the T-4 FSX and the Lockeed P-3 Series FSX links doesn't work, Im getting an error saying "this item might not exist or no longer available"

I myself could go to the link destination by clicking the URL, but login seems to be conditional. It's hard to use.
I will move the data downloadable on this site to Google soon. Please wait for a while until the move is completed.

[kbt]

I reedited the download link.
However, since the link destination is a place like the storage of data, please obtain something that you intuitively interested in. :playful:　
Please forgive me that it is not a kind composition like SOH library.

FS KBT
https://viperhiro.wordpress.com/

[Naismith]

Thanks very much for this. I looked further down the page and saw your lovely Kawasaki T4. Will there be further work done on this fine model I wonder?

[vonstroheim]

Thank you Daisuke and Hiroaki for Canadian version of your great Orion P3.

With DX10, there is a little glitch, and it can be quite easily fixed with MdlMatXX as explained here (http://www.sim-outhouse.com/sohforums/showthread.php/85402-P-3-Thread-continued?p=893262&viewfull=1#post893262). Detailled instructions (thanks Dave) and MdlMatXX tool (thanks Martin) can be found here (http://www.sim-outhouse.com/sohforums/showthread.php/85402-P-3-Thread-continued?p=866125&viewfull=1#post866125). Some screenshots:

http://www.fsfiles.org/flightsimshotsv2/images/2018/04/06/mdlmatxx.gif

http://www.fsfiles.org/flightsimshotsv2/images/2018/04/06/CP140.jpg

[tommieboy]

Nice to see that there is a DX10 fix. Hopefully this will be implemented on future releases.

Tommy