dasuto247
May 27th, 2016, 17:24
Hi dasuto247,
In the aircraft cfg file.
[contact_points]
//0 Class
//1 Longitudinal Position (feet)
//2 Lateral Position (feet)
//3 Vertical Position (feet)
//4 Impact Damage Threshold (Feet Per Minute)
//5 Brake Map (0=None, 1=Left, 2=Right)
//6 Wheel Radius (feet)
//7 Steer Angle (degrees)
//8 Static Compression (feet) (0 if rigid)
//9 Max/Static Compression Ratio
//10 Damping Ratio (0=Undamped, 1=Critically Damped)
//11 Extension Time (seconds)
//12 Retraction Time (seconds)
//13 Sound Type
Regards,
B24Guy
[contact_points]
//0 Class
//1 Longitudinal Position (feet)
//2 Lateral Position (feet)
//3 Vertical Position (feet)
//4 Impact Damage Threshold (Feet Per Minute)
//5 Brake Map (0=None, 1=Left, 2=Right)
//6 Wheel Radius (feet)
//7 Steer Angle (degrees)
//8 Static Compression (feet) (0 if rigid)
//9 Max/Static Compression Ratio
//10 Damping Ratio (0=Undamped, 1=Critically Damped)
//11 Extension Time (seconds)
//12 Retraction Time (seconds)
//13 Sound Type
//14 Airspeed limit for retraction (KIAS)
//15 Airspeed that gear gets damage at (KIAS)
point.0= 1, -18.00, 0.00, -3.35, 3200.0, 0, 0.50,180.0, 0.25, 2.5, 0.90, 1.0, 4.00, 0, 0, 200 //tail wheel
point.1= 1, 1.80, -5.93, -7.65, 2200.0, 1, 1.35, 0.0, 0.54, 2.5, 0.76, 5.5, 4.50, 2, 0, 200 //left wheel
point.2= 1, 1.80, 5.93, -7.65, 2200.0, 2, 1.35, 0.0, 0.54, 2.5, 0.76, 5.5, 4.50, 3, 0, 200 //right wheel
point.3= 2, 0.00, -20.00, -1.25, 800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 5 //left wing
point.4= 2, 0.00, 20.00, -1.25, 800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 6 //Right wing
point.5= 2, -20.25, 0.00, -0.60, 800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 9 //tail
point.6= 2, 6.41, 0.00, -1.50, 800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 4 //belly
point.7= 2, 3.45, -5.43, -4.20, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 5 //left gull
point.8= 2, 3.45, 5.43, -4.20, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 6 //right gull
point.9= 2, -5.00, -0.10, -2.50, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 5
point.10= 2, -5.00, 0.10, -2.50, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 6
point.11= 2, 7.00, -0.10, -2.00, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 5
point.12= 2, 7.00, 0.10, -2.00, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 6
Which numbers under vertical position do I change to 0?
Allen
May 27th, 2016, 18:19
Take point.0= 1, -18.00, 0.00, -3.35, 3200.0, 0, 0.50,180.0, 0.25, 2.5, 0.90, 1.0, 4.00, 0, 0, 200 //tail wheel
After the = is 1. The 1 is the Class. -18.00 Longitudinal Position. 0.00 is Lateral Position. -3.35 is the Vertical Position.
vBulletin® v4.2.1, Copyright ©2000-2024, Jelsoft Enterprises Ltd.