Mustang!!!!
Page 1 of 2 12 LastLast
Results 1 to 25 of 30

Thread: Mustang!!!!

  1. #1

    Mustang!!!!

    One of the other military subjects on the plate is the Mustang. Currently flying like a spitfire as we had that at hand.

    These are VERY WIP images. Interior wise we're at the code stage and feature testing stage. Exterior we're at the building-mapping stage. We've built it a little like a plastic model so gun bays are done , gear wells are done, engine bay is done etc etc.

    Hope it is ok to link directly to our site. Only added the work in progress indicators everything else is straight from the sim. Also I run an I5 6600 3.3ghz +nv 1060 gtx + 32 gb ram... so the images are what they are. These are all on fbook, well they are bigger there. This is just a selection as the forum only allows 6 images. And there are 20 ... I am lazy. Turns out also I cant count...







    The next ones were taken at biggin hill because raisins.





    ( not a super fan of the OTT depth of field the stock camera has in sim )

    And finally the 10 different tyres ( we spell tyres correctly in Oz ) that were used on the P51. We are providing these as part of the paintkit same with the 3 different types of front nose radiator covers. We have some more features planned but will be keeping them a little hush hush.



    Video will be in the comment below. Again facebook has more and bigger versions.

  2. #2
    And lastly a simple video using the hangar animations from the sim. Real easy to make. If the fellas and fella-ettes from Asobo are reading this. Thanks for the showcase idea Just got to stop the camera flying through the engine !!

    https://youtu.be/A9F8OeklTng

    So I tried to embed the above video I really did...

    Last edited by pilto von pilto; February 28th, 2021 at 00:07. Reason: I suck at embedding.

  3. #3
    oh yes, looking forward to this!
    You can find most of my repaints for FSX/P3D in the library here on the outhouse.
    For MFS paints go to flightsim.to

  4. #4
    This! Must be forbidden !

    It is not nice to waylay innocent flightsimmers with such disclosed pictures unwarned !
    If not pornography it sure is a genuine Torment of Tantalus ! That's what it is! Shame on you! \


    ( you're right about not being a fan of 'OTT depth of field' , it's terrible, ruins that piccie totally. You know what, lets forbid that too ;-)

  5. #5
    Quote Originally Posted by Javis View Post
    This! Must be forbidden !

    It is not nice to waylay innocent flightsimmers with such disclosed pictures unwarned !
    If not pornography it sure is a genuine Torment of Tantalus ! That's what it is! Shame on you!
    ROFLMAO!! Where is the like button?

    Priller
    Windows 11 23H2 Enterprise Edition
    Intel i9 13900KF @ 5.8 GHz
    be quiet! Dark Rock 4 Pro cooler
    G-Skill 32Gb DDR5 RAM 7600-36
    MSI Z790 Motherboard
    Nvidia RTX4090 Graphics Card
    Samsung 1TB 980 EVO PCIe M.2 C: drive
    Samsung 2TB 980 EVO PCIe M.2 Data drive
    be quiet! Straight Power CM1000W PSU

  6. #6
    Quote Originally Posted by pilto von pilto View Post
    One of the other military subjects on the plate is the Mustang. Currently flying like a spitfire as we had that at hand.

    These are VERY WIP images. Interior wise we're at the code stage and feature testing stage. Exterior we're at the building-mapping stage. We've built it a little like a plastic model so gun bays are done , gear wells are done, engine bay is done etc etc.

    Hope it is ok to link directly to our site. Only added the work in progress indicators everything else is straight from the sim. Also I run an I5 6600 3.3ghz +nv 1060 gtx + 32 gb ram... so the images are what they are. These are all on fbook, well they are bigger there. This is just a selection as the forum only allows 6 images. And there are 20 ... I am lazy. Turns out also I cant count...







    The next ones were taken at biggin hill because raisins.





    ( not a super fan of the OTT depth of field the stock camera has in sim )

    And finally the 10 different tyres ( we spell tyres correctly in Oz ) that were used on the P51. We are providing these as part of the paintkit same with the 3 different types of front nose radiator covers. We have some more features planned but will be keeping them a little hush hush.



    Video will be in the comment below. Again facebook has more and bigger versions.

    Super! Can we have the two different canopy shapes according to which factory the aircraft was built in? Just love that kind of historic detail in a sim. Thanks.

  7. #7

  8. #8
    Wow! I love the distortion of the interior when looking through the canopy from the outside. I sure hope MSFS soon becomes a fully fleshed out flight sim so I can say farewell to FSX and skip P3D.
    My computer: ABS Gladiator Gaming PC featuring an Intel 10700F CPU, EVGA CLC-240 AIO cooler (dead fans replaced with Noctua fans), Asus Tuf Gaming B460M Plus motherboard, 16GB DDR4-3000 RAM, 1 TB NVMe SSD, EVGA RTX3070 FTW3 video card, dead EVGA 750 watt power supply replaced with Antec 900 watt PSU.

  9. #9
    Quote Originally Posted by shotgunshack View Post
    Super! Can we have the two different canopy shapes according to which factory the aircraft was built in? Just love that kind of historic detail in a sim. Thanks.
    Probably not. Never say never but the specifications/features/timeline/liveries/price point are pretty much locked in at present. We have got some more features to come but it is pretty complex enough as it is.

    On a related note.. Chromate yellow/green/bare metal finish in the gear wells is one of the most hotly debated subjects I have ever researched.
    More so than the "was the hurricane better than the spitfire ? " We know the answer to that one dont we Baz ?

  10. #10
    This looks amazing. And can we select Goodyear or Dunlops? LoL. I hope the paint kit will have weathering on a separate layer so we can have restored warbird repaints. For the gear well colors, you could look no further than the restored P-51B Lope's Hope or the P-51D Sierra Sue for accuracy. You've probably got that covered anyway. Any plans for a B model?

  11. #11
    The interior confines of the P-51, gear wells included, were always a patchwork no matter what, throughout P-51 production. There was however more use of primer in late production (such as a P-51D-25-NT - which seems to be about the variant you have depicted here by the cockpit details) vs. early production (such as P-51D-10-NA).

    This is what is true to original factory production:

    - In early production, aluminum parts, such as skins and ribs, would be left unprimered if the Alcoa Alclad or Reynolds Pureclad finish remained largely untampered. They would also be left unprimered if spot-welding was required (such as landing gear doors, cowl panels and gun bay doors).
    - Aluminum forgings and extrusions (such as brackets and stringers) were to receive a single coat of primer. Raw zinc chromate, which is yellow in color, was used to cover those aluminum parts. By late production, however, it was mandated that all aluminum parts receive a coat of zinc chromate (this showed up in P-51D-25-NT, P-51D-30-NT and P-51D-30-NA production)
    - Magnesium forgings (such as brackets) were to receive two coats of primer. The second primer coat was tinted with black pigment to turn the zinc chromate green. This way they could ensure that there was complete two-coat coverage.
    - During the production process, if a batch of raw zinc chromate ran out, and a batch of black-tinted (green) zinc chromate was on hand, they'd just use that on aluminum parts until another batch of raw (yellow) zinc chromate was at hand.

    Because of all of this, there was always a patchwork of bare metal, yellow and greens throughout the airframe, not just the wheel wells (and true of B-25 and AT-6 production as well). The cockpit was painted interior green after the fuselage finished assembly, and was the only area inside of the aircraft given any solid coat of a single color (areas such as the wheel wells, gun bays, engine bay, etc. were not painted or primered after assembly). The spot-welded gun bay doors sometimes received a coat of raw (yellow) zinc chromate after completion, but sometimes remained bare metal depending on the pace of production. The landing gear doors were left bare metal throughout almost all P-51 production, until during P-51D-30-NA and P-51D-25-NT production when they finally started coating them in primer as well (raw zinc chromate).

    Here are some photos of preserved examples, with the primer finishes left as they have been since original production.

    P-51K-10-NT 44-12116 (this is the original finish as seen on the clam shell doors during WWII - the majority flying today, however, have the stainless steel rub plate, running down the middle, left bare so as to look nicer - only a couple very authentic restorations, Sierra Sue II and Lope's Hope 3rd, have the stainless rub plates authentically coated in zinc chromate as seen here)



    P-51K-10-NT 44-12125 (the inner clam shell landing gear doors have been painted silver for display, while the landing gear wells remain preserved)




  12. #12
    P-51D-25-NA 44-73349 (original, unrestored wheel wells - the only thing changed since production are the Swiss placards written in German)








  13. #13
    A few other details about the primer finishes on P-51D/K's:

    - The oil tank was never painted yellow. That is something that has only come along in non-authentic restorations. The oil tank, depending on the pace of production, was either given a coat of raw (yellow) zinc chromate, or just left bare metal.

    - Like the oil tank, the header coolant tank was almost always left bare metal. If it was primered, it was given a coat of raw (yellow) zinc chromate.

    - The engine bearers/mounts were always finished in black-tinted (green) zinc chromate, and were never left in single-coat raw (yellow) zinc chromate.

  14. #14
    Here are a lot more photos that may be of use. These are of P-51D-25-NT 45-11513 (NZ2423), which when these photos were taken had never been restored. All of the internal primer and paint finishes are original to when it was manufactured in 1945. (The oddly-colored green paint on the clam shell landing gear doors was added while it was in service in New Zealand, where as you can see the raw (yellow) zinc chromate original factory finish below). Even the engine is original to the airframe when it rolled out of the Dallas NAA factory. A miner few details in the cockpit, such as the way the canopy emergency release handle is painted, were changed during its time with the RNZAF.

    P-51D-25-NT 45-11513 (NZ2423) photo album:

    https://www.flickr.com/photos/343636...57718475445977

    If you have any questions with regard to anything within the photos I will gladly help answer them.

    They all come from Brandon Deere, who is currently having the aircraft restored to fly in New Zealand:

    https://www.facebook.com/groups/119982544710555

  15. #15
    Quote Originally Posted by Snurdley View Post
    This looks amazing. And can we select Goodyear or Dunlops? LoL. I hope the paint kit will have weathering on a separate layer so we can have restored warbird repaints. For the gear well colors, you could look no further than the restored P-51B Lope's Hope or the P-51D Sierra Sue for accuracy. You've probably got that covered anyway. Any plans for a B model?
    One of the ideas is to take the idea from the socata we did and make it a little less involved ( only providing restored or weathered instead of the 4 options ) to help here. We know there are people who like the "highly polished to an inch of it's life " and also the " this is a warbird and there are people shooting at us so no time to polish the plane " types. Of course we're the latter so you'll see those textures first. We've got something else planned in that area but it is up to MSFS to see if it can do it. FSX can so it should be able to.

    As for colours we've gone with our gut here. I basically took a lot of the pics found online and the reference books, I have added up the chromate yellow Vs Chromate green VS Raw metal vs field modifications and then found the one that had the most reference. Democratic process if you will ! The good news is that if a person doesnt like our decisions then all the gearwell is on one layer. Simple enough to repaint it.

    No plans at all to do the B.

  16. #16
    Quote Originally Posted by Bomber_12th View Post
    Here are a lot more photos that may be of use. These are of P-51D-25-NT 45-11513 (NZ2423), which when these photos were taken had never been restored. All of the internal primer and paint finishes are original to when it was manufactured in 1945. (The oddly-colored green paint on the clam shell landing gear doors was added while it was in service in New Zealand, where as you can see the raw (yellow) zinc chromate original factory finish below). Even the engine is original to the airframe when it rolled out of the Dallas NAA factory. A miner few details in the cockpit, such as the way the canopy emergency release handle is painted, were changed during its time with the RNZAF.

    P-51D-25-NT 45-11513 (NZ2423) photo album:

    https://www.flickr.com/photos/343636...57718475445977

    If you have any questions with regard to anything within the photos I will gladly help answer them.

    They all come from Brandon Deere, who is currently having the aircraft restored to fly in New Zealand:

    https://www.facebook.com/groups/119982544710555
    Looking forward to see that fly! Have you followed the other John Smith aircraft?

  17. #17
    Quote Originally Posted by pilto von pilto View Post
    No plans at all to do the B.
    So if, say, Bomber_12th as an example, was to bring over a P-51B/C pack, there'd be a market for it.

  18. #18
    I prefer the B and C Mustangs so I'd be a very happy wombat.
    Of course, if John was feeling really magnanimous the original Allison Mustangs would earn him a lifetime supply of XXX or Vic or Redback.....or Carlton or even Noosa.
    "Illegitimum non carborundum".

    Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
    Intel Core i9 10980XE Extreme Edition X
    ASUS ROG Rampage VI Extreme Encore MB
    Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
    Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
    Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
    Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
    ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,

  19. #19
    I've retired myself from flight sim developing, but I'd gladly assist wherever possible in any P-51 development for MSFS.

    Another detail I thought I would mention too is the paint on the landing gear handle. From the factory, it was never painted overall red - that was something that only first took after WWII, in the 1950s when the cockpits of some in the USAF were painted black. Originally, from North American Aviation, the gear handles were always either painted entirely flat black (with white lettering), or interior green with only the rounded end painted red (with black lettering).
    Last edited by Bomber_12th; March 1st, 2021 at 12:08.

  20. #20
    But, but, but........what about the long awaited P39Q?
    Surely the most overlooked aircraft in the proper Flight Sim community.
    "Illegitimum non carborundum".

    Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
    Intel Core i9 10980XE Extreme Edition X
    ASUS ROG Rampage VI Extreme Encore MB
    Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
    Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
    Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
    Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
    ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,

  21. #21
    Quote Originally Posted by Bomber_12th View Post
    I've retired myself from flight sim developing, but I'd gladly assist wherever possible in any P-51 development for MSFS.
    Oh no...but what about the B-25 (and the P-39..)???
    You can find most of my repaints for FSX/P3D in the library here on the outhouse.
    For MFS paints go to flightsim.to

  22. #22
    Quote Originally Posted by Bomber_12th View Post
    I've retired myself from flight sim developing, but I'd gladly assist wherever possible in any P-51 development for MSFS.

    Another detail I thought I would mention too is the paint on the landing gear handle. From the factory, it was never painted overall red - that was something that only first took after WWII, in the 1950s when the cockpits of some in the USAF were painted black. Originally, from North American Aviation, the gear handles were always either painted entirely flat black (with white lettering), or interior green with only the rounded end painted red (with black lettering).
    Hi John,

    For what it's worth, your Mustangs were the best ever and I've enjoyed them in FSX and several iterations of P3D. I've spent many an hour in them!

    Enjoy your retirement at such a young age!

    Priller
    Windows 11 23H2 Enterprise Edition
    Intel i9 13900KF @ 5.8 GHz
    be quiet! Dark Rock 4 Pro cooler
    G-Skill 32Gb DDR5 RAM 7600-36
    MSI Z790 Motherboard
    Nvidia RTX4090 Graphics Card
    Samsung 1TB 980 EVO PCIe M.2 C: drive
    Samsung 2TB 980 EVO PCIe M.2 Data drive
    be quiet! Straight Power CM1000W PSU

  23. #23
    The only way I'd be able to get back into FS development work is if I were to win the lottery. At this time, working two jobs, I just don't have the time for it while still having time for other things that I wish to do/enjoy more. As I mentioned here some months ago, I'm just a casual flight simmer now, eager to support anyone else developing warbirds for MSFS (and DCS).

    Thank you Prlller, it means a lot to me year to read that!

  24. #24
    pilto von pilto

    I fixed the embed video primarily to test its function.

    I had to use the long form of the URL as the short one did not embed. Of course I have no idea why.

    This is the long form

    https://www.youtube.com/watch?v=A9F8OeklTng

    ASUS TUF F17 Gaming Laptop
    17.3" 144Hz Full HD IPS-Type
    CPU 11th Gen Intel(R) Core(TM) i7-11800H @ 2.30GHz 2.30 GHz
    Ram CORSAIR Vengeance 32.0 GB DDR4 3200
    NVIDIA GeForce RTX 3060 Laptop GPU 6GB

  25. #25
    Quote Originally Posted by Bomber_12th View Post
    The only way I'd be able to get back into FS development work is if I were to win the lottery. At this time, working two jobs, I just don't have the time for it while still having time for other things that I wish to do/enjoy more. As I mentioned here some months ago, I'm just a casual flight simmer now, eager to support anyone else developing warbirds for MSFS (and DCS).

    Thank you Prlller, it means a lot to me year to read that!
    Well John, win the lottery. Please.
    Regards, Tom Stovall KRDD


Members who have read this thread: 0

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •