SimWorks Studios F-4B Phantom II - Page 8
Page 8 of 24 FirstFirst 1234567891011121314151618 ... LastLast
Results 176 to 200 of 585

Thread: SimWorks Studios F-4B Phantom II

  1. #176
    It will be using the DX lighting system in the end, right now it is based on good old Shift+L. We cannot delived that kind of detailed lighting with 0 FPS impact without that system.

    Dman the beta version will be FSX:A only at launch. We are already P3D-ing it and it will be OK with FSX:Steam and P3D too in the proccess, without a new purchase.

    Victory103, this is why we're also checking feasibility. You don't need to join a VA, we're trying to make a system where you can form a team with friends. But we're deciding on the minimum number of people in a group that will have the right to a discount.

    Last edited by SiR_RiPPER; December 25th, 2015 at 09:37.

    SimWorks Studios

    Alex Vletsas

    3D Modeler & Animator
    http://www.simworksstudios.com
    http://www.facebook.com/SimWorksStudios

  2. #177
    Chrissy/New Years and Birthday prezzy is going to have to be TACPAC !

  3. #178
    That was just my experience in my VA at the time with a somewhat "group" buy, I wasn't on the staff so I did not know the particulars of the deal. I think it's a good idea given the level of interest here at SOH in this classic. Another beta test to add to my list.
    Fly Navy/Army
    USN SAR
    DUSTOFF/ARMY PROPS

  4. #179

    Jetstream 41 Please make the project?

    SimWorks Studios Jetstream 41 Please make the project for FSX SP2/P3D/P3Dv2/P3Dv3/FSX:SE

    because of PMDG no virtual cabin........

    SimWorks Studios Jetstream 41 exterior, virtual cabin and virtual cockpit for WIP !!!!

  5. #180
    are we there yet? are we there yet?
    Intel i5-2500K - Zotac GTX 750 Ti - 4GB G-Skills - Gigabyte B75M - Simbada 500 W PSU - 17' LED

  6. #181
    Quote Originally Posted by Peg o my heart View Post
    are we there yet? are we there yet?
    Ok? I don't know ...

  7. #182


    She's getting there.....

    Dave

  8. #183
    Quote Originally Posted by tjsdn1375 View Post
    SimWorks Studios Jetstream 41 Please make the project for FSX SP2/P3D/P3Dv2/P3Dv3/FSX:SE

    because of PMDG no virtual cabin........

    SimWorks Studios Jetstream 41 exterior, virtual cabin and virtual cockpit for WIP !!!!
    Because of past performance tjsdn1375, this is another warning to stop posting off topic posts in threads. This thread is for the SimWorks Studios F-4B Phantom.
    Regards, Tom Stovall KRDD


  9. #184
    Quote Originally Posted by stovall View Post
    Because of past performance tjsdn1375, this is another warning to stop posting off topic posts in threads. This thread is for the SimWorks Studios F-4B Phantom.
    Oh, I'm sorry. I was hoping wrong.

  10. #185
    Hello gents,
    I'd like to inform you that the F-4B/N Phantom II Open Beta will release as a download on our website, http://www.simworksstudios.com, on January 31st, 18:00GMT.

    The initial release version will be FSX-only and full P3D support will come in the next releases.

    The base price will be 40.00€ (not including VAT).

    The F-4B/N Phantom II Open Beta will initially feature the F-4B with TacPack capabilities. Down the road the full package will include:

    • F-4B Phantom II – early model, no RHAW
    • F-4B Phantom II – various RHAW models
    • F-4N Phantom II
    • USS Coral Sea AI ship, along with our custom FLOLS system
    • Full TacPack integration
    • FSX and P3D compatible


    As we wrote on our website and FB before, buyers of the Open Beta are entitled to a 50% discount off our Carrier Battlegroup package that will release this Spring. Buyers of the version after it has gone gold have the right to a 25% discount.


    Finally, we're also running a mini-contest for our Facebook followers, if you're interested have a look here: http://www.facebook.com/SimWorksStudios/

    SimWorks Studios

    Alex Vletsas

    3D Modeler & Animator
    http://www.simworksstudios.com
    http://www.facebook.com/SimWorksStudios

  11. #186
    Alex,

    Would you please post a screenshot of the side view of the Coral Sea? Thanks, NC

  12. #187
    Hello NC,

    Here are a couple WIP shots of the Coral Sea in-editor. The version we're doing is a mid-1960s one with the added wedge on the angled deck.
    The shots are WIP, there are some antennae missing as well as the textures, which are being modified from USS Midway.

    Attached Thumbnails Attached Thumbnails Coral_Sea_2.jpg   Coral_Sea_1.jpg  

    SimWorks Studios

    Alex Vletsas

    3D Modeler & Animator
    http://www.simworksstudios.com
    http://www.facebook.com/SimWorksStudios

  13. #188
    Any information about minimum system requirements?
    The more you do, the less you dream

  14. #189
    Quote Originally Posted by SiR_RiPPER View Post
    Hello NC,

    Here are a couple WIP shots of the Coral Sea in-editor. The version we're doing is a mid-1960s one with the added wedge on the angled deck.
    The shots are WIP, there are some antennae missing as well as the textures, which are being modified from USS Midway.
    Thank you for the shots! I learned something, as I did NOT know the hangar/elevator openings were different from (say that of the USS Saratoga - which were rounded). Interesting! NC

    Attached Thumbnails Attached Thumbnails hangar.jpg  

  15. #190
    The http://www.usscoralsea.net website has a lot of reference shots on Coral Sea and very well sorted for research (per decade, per day). The Midway indeed class had squared hangar doors.
    Here's a high-res photo of CV-43 in the 1960s: http://usscoralsea.net/images/cva431...aneguardmb.jpg

    SimWorks Studios

    Alex Vletsas

    3D Modeler & Animator
    http://www.simworksstudios.com
    http://www.facebook.com/SimWorksStudios

  16. #191
    Interesting!

    A a naval architect by profession, I would not have liked such large, squared openings in the sides of the hull. Stress concentration would cause cracks at the corners, especially in heavy seas with the hull hogging and sagging riding waves. I wonder if that was the case in service...

  17. #192
    Quote Originally Posted by Dimus View Post
    A a naval architect by profession, I would not have liked such large, squared openings in the sides of the hull. Stress concentration would cause cracks at the corners, especially in heavy seas with the hull hogging and sagging riding waves. I wonder if that was the case in service...
    That is an interesting mention , the same with the early jet airline 'The Comet' , square windows WHOOPS snap! .. Midway Class built at speed due to WWII so being the last thought , It was not until the Forrestal class showed sign's of the rounded hanger entrances ... it amazing to look at photo's of these ships with 60 to 80 aircraft but to think they are all scraped now but for the museum Midway and Intrepid .

  18. #193
    Hi mates! Did someone buy the open beta Phantom? It seems that
    the Buy Now Button is not working
    The more you do, the less you dream

  19. #194
    According to their Facebook page post, the release has been temporarily delayed.

    [SIGPIC][/SIGPIC]

  20. #195
    Quote Originally Posted by StormILM View Post
    According to their Facebook page post, the release has been temporarily delayed.
    Thank you Storm
    The more you do, the less you dream

  21. #196
    We've had some red-tape originating problems thus the delay. But we're getting there again!

    We are giving our quickstart checklists on our website (for free, of course) to anyone interested in getting a head start and are working on a tactical supplement to be uploaded as well, sometime this week.


    Spooky wasn't particularly fond of going up against MiGs...
    Attached Thumbnails Attached Thumbnails WPNS_3.jpg  

    SimWorks Studios

    Alex Vletsas

    3D Modeler & Animator
    http://www.simworksstudios.com
    http://www.facebook.com/SimWorksStudios

  22. #197
    SOH-CM-2024 Cees Donker's Avatar
    Join Date
    Jun 2005
    Location
    Zoetermeer, Netherlands
    Age
    68
    Posts
    4,642
    Good to hear/read Alex!



    Cees

  23. #198
    OK, it's time...



    After an unexpected delay, we gladly announce that the F-4B/N Open Beta will be available on our store Saturday, February 13 at 16:00GMT. It is sold through www.simworksstudios.com at a base price of 40€+VAT.

    The first release version will support only Flight Simulator X: Acceleration. It may work without a hitch in P3D/FSX:SE but the plane and installer is compiled for FSX:A so we need to clarify that in advance.

    The initial release contains:


    • F-4B pre-1966 version


    • High detail exterior & interior models
    • Detailed textures
    • High fidelity flight Dynamics
    • Many Multiplayer compatible animations
    • Custom soundset from SkysongSoundworks
    • Carrier ready


    • TacPack functionality and loadout manager for the following items:


    • 600 and 370 gallon fuel fanks
    • AIM-7
    • AIM-9
    • Mk.82 versions
    • Mk.83
    • LAU-10/33 with Zuni Rockets
    • Mk.4 Gun Pods



    • Mk.20 Rockeye*
    • Mk.77 Napalm Canisters*
    • M117 Iron Bombs*
    • Various pylons*

    *These will become droppable as TacPack gets updated


    • Included manuals: Aircraft Familiarisation, Cockpit Familiarisation, Tactical Supplement (that would be the weapons manual)


    NOTE: Before running the installer, be sure to have deactivated your antivirus program otherwise the installer will not start, or corrupt your airplane installation.

    Repainters, thePaintkit will be released on Monday so clean up your brushes and get ready for it!



    With regards to the carrier, we are working on the textures for USS Coral Sea so we can provide the first public version within the next couple of releases. Therefore, it will not be included with tomorrow’s package.



    We are also thinking of initiating a SQUADRON/COMMUNITY DISCOUNT program if sufficient interest is expressed. Please contact us at sales@simworksstudios.com if you are interested. The sale conditions will be made public within the next week depending on the demand.


    As this is an open beta version, bugs are definitely to be encountered and some features missing
    or removed (i.e. drag chute, inflight refueling). This is not an excuse to sit back, though!For any bugs and problems you may encounter, please go directly to our forum at http://simworksstudios.com/forum/index.php
    . After you register you will be able to see the support forum and post your request there or at support@simworksstudios.com .


    Best regards,


    The SimWorks Studios team


    SimWorks Studios

    Alex Vletsas

    3D Modeler & Animator
    http://www.simworksstudios.com
    http://www.facebook.com/SimWorksStudios

  24. #199
    SOH-CM-2024 Cees Donker's Avatar
    Join Date
    Jun 2005
    Location
    Zoetermeer, Netherlands
    Age
    68
    Posts
    4,642
    Great news! I know what I'll be doing this weekend!


    Cees

  25. #200
    Quote Originally Posted by Cees Donker View Post
    Great news! I know what I'll be doing this weekend!


    Cees
    +1
    Mike M.​



Members who have read this thread: 4

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •