Milviz B-55 SP is out.

[Roadburner440]

Good evening everyone. Just wanted to let you guys know that we just released the SP for the Baron on our site here: http://www.milviz.com/forum/viewtopic.php?f=60&t=2167 . For people that bought from our site/F1 you can download from our site and reinstall. The other vendors will be uploading the SP over the next few days! Thanks for the support, and hope everyone in the States has a good 4th of July weekend. I know the heat here in Virginia has been killing me. So no better time to go flying than now.

[Thunderbolt]

Thanks Steve.

I do an normal "Sim" flight and I level out the Beech. The trim tabs of the Elevator stand on 5,7° up ?

[PCAviator]

Confirming PC Aviator Australia now has the B55 Baron SP1 release online - http://www.pcaviator.com.au/store/Mi...-55-Baron.html

[krazycolin]

Check your trims...

[Thunderbolt]

The Trim Tabs are reversed ?

The V.1, I deleted by Hand and the SP1 has no uninstal.exe ? I would like to install it again.

And what is the flile difference of Beech_Baron_55 Milviz / Beech_Baron_E55 Milviz ?

[krazycolin]

Two different FDE's by two different masters...

the trim tabs are a bug. We are considering releasing ANOTHER SP just for those...

sorry...

[Thunderbolt]

Well then I delete the flie Beech_E55.

[krazycolin]

I would try it first... it doesn't fly the same at all as the B-55....

[Thunderbolt]

ah okay I will try.

[modelr]

while the trim tab movement does seem to be a little much, it is correct to be opposite the percieved movement. Up trim pushes the elevator down to trim the plane for level flight at speed. This is correct.

[bstolle]

Thunderbolt mentions a 5.7deg deflection. The real tab has a range from 10deg up to 23deg down, so 5.7deg doesn't seem to be too much in case of 'normal' crz.

[n4gix]

I would try it first... it doesn't fly the same at all as the B-55....

I should think not, since the B55 is modeling the original Teledyne Continental Motors IO-470 260 hp engines, while the E55 is modeling the later Teledyne Continental Motors IO-550-C 285 hp engines...

[Stan V.]

Have any been posted beyond those in the purchased download? If so, pertinent links would be appreciated. I saw the paint kit on MilViz's forum but I have no talents in that direction.