Page 4 of 21 FirstFirst 12345678910111213141516171819 ... LastLast
Results 46 to 60 of 306

Thread: X3 Patrol Logs

  1. #46
    SOH Mod Lionheart's Avatar
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    51
    Posts
    11,792
    lololol....


    Where do you come up with this?? lolol..





    Bill
    Humble Poly bender and warrior of Vertices

    <a href=http://www.prepar3d.com target=_blank rel=nofollow>http://www.prepar3d.com</a>

    iMac 24" Alum UniBody; Intel Core Duo 2.80 GHz;
    ATI Radeon HT 2600 XT; 1TB drive; 4 Gigs DDR Ram;
    Apple juice plasma injection system.

  2. #47
    One-time Jarhead Craig Taylor's Avatar
    Join Date
    Jun 2007
    Location
    Woodbridge, Virginia, USA
    Age
    49
    Posts
    429
    Thanks for the tips GB. I've always used the repair laser rather than pay. It can take a while, but I'm cheap! It seems that you can lose components with hull damage in battle, and I was just relating that my brand-spanking new triplex scanner was toasted in a particularly nasty brawl with some Yaki pirates. Was not happy afterwards, but then again, neither were they.
    Craig "CB" Taylor
    Team AVSIM RTWR

  3. #48
    SOH Mod Lionheart's Avatar
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    51
    Posts
    11,792
    Last night, I tried this 'repair laser' on my space suit on a beatup old Boron Freighter I purchased cheap at a station far North in the Galaxy. Its shields were gone and the hull was about 3/4 percent.

    So there I am, beaming away with this laser and nothing was happening.. I didnt seem to be doing any good. After about 5 min's, I decided to fly it myself to the nearest trading station and get the SETA installed and limp it back to Argon Primes Ship Yard.

    Dang.. . at 27 knots or M/S, this thing took me nearly 20 min's to get from one side of the sector to the trading station, lololol.. No SETA drive!!!! arrgh...

    Then, came the manual flight from Rolks Fate (I think it was that sector, just near Ceo's Buckzoid), and flew it all the way to Argon Prime, then down to Kingdom of Light for the Jump Drive installation.

    Then........ I used Cheat to fit it with Super Tune, etc.. (My theory is wait till its at a station, updated, then supertune the thing, so I am not totally cheating).

    At least now I have a freighter for dirt cheap now that I can have out there making some money.. I'll probably place this one far away in a distant work sector.


    On the home side, I had my extremely fast, highly efficient Baldric Terran freighter reverse engineered (disected) so that I can start manufacturing my own. I have Qeued 10 units for production. (Oh yeah.. ).

    I still may do this with a Caimen freighter as for some reason, supertune turns these dang things into ultra rockets. You cannot fathom how fast they can go.. The Iguana Vanguard for instance, with super tune is so dang fast, nothing can touch it that I have found yet.. They have the best engines..



    Bill
    Humble Poly bender and warrior of Vertices

    <a href=http://www.prepar3d.com target=_blank rel=nofollow>http://www.prepar3d.com</a>

    iMac 24" Alum UniBody; Intel Core Duo 2.80 GHz;
    ATI Radeon HT 2600 XT; 1TB drive; 4 Gigs DDR Ram;
    Apple juice plasma injection system.

  4. #49
    Jr. Admin gigabyte's Avatar
    Join Date
    Jan 2007
    Location
    Atlantic Canada
    Age
    55
    Posts
    2,031
    Stardate 2009.11.25

    Spent the last week in very frustrating meetings listining to a room full of whiney pilots about control set-up and "common Interface Panels" so I dug out the Zboard and reprogramed a nice complete common panel, now as soon as I finish installing it I am back to the stars, watch for progress reports to follow soon...

    [Tip for new users - try to get used to using the keyboard to issue commands, it makes things so much faster and can make a big difference in combat, the mouse if great when in station, but when the action is hot if you know how you can issue commands much faster on the KB...]
    Regards,
    Mike "Ears Hopin" P.

    Freedom , everyone enjoys it, very few defend it. - If You Won't Stand Behind Our Troops then feel free to stand in front!

    _________________________________________________
    "Let Being Helpful Be More Important Than Being Right!"

  5. #50
    SOH Mod Lionheart's Avatar
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    51
    Posts
    11,792
    Hey Mike,


    Roger that man!

    I can whip through the various ships and commands and locations via the keyboard shortcuts and all. Makes managing a fleet very very efficient.

    I wish I could figure out how to...........

    * Turn on targeting to identify what is in the target viewer (happens at times, and I cannot replicate it).

    * How to realign my ship to heads up (Y axis) so that I can hyper jump to Sectors and not be cattywompis to the Sector (pointing down or up at wierd angles... ). So far, if I really need to, I go through a gate and come back in and I am realigned then.. Otherwise I use the small icon in the Sector map of my ship and try to align myself that way.. Difficult when you are that small of a object.. arrgh..



    Bill
    Humble Poly bender and warrior of Vertices

    <a href=http://www.prepar3d.com target=_blank rel=nofollow>http://www.prepar3d.com</a>

    iMac 24" Alum UniBody; Intel Core Duo 2.80 GHz;
    ATI Radeon HT 2600 XT; 1TB drive; 4 Gigs DDR Ram;
    Apple juice plasma injection system.

  6. #51
    Jr. Admin gigabyte's Avatar
    Join Date
    Jan 2007
    Location
    Atlantic Canada
    Age
    55
    Posts
    2,031
    Quote Originally Posted by Lionheart View Post
    I wish I could figure out how to...........

    * Turn on targeting to identify what is in the target viewer (happens at times, and I cannot replicate it).
    This might be a range issue, I noticed that I sometimes can target an object but it is not close enough for my scanner to identify, it's weird tho, if you leave the object targeted it will not give you a full ID until you are very close, if you switch to a different target them back it often gives you a good ID, it may be the scanner logic, or possible it only scans so often like every 10 min and as soon as it picks up a new target???
    * How to realign my ship to heads up (Y axis) so that I can hyper jump to Sectors and not be cattywompis to the Sector (pointing down or up at wierd angles... ).
    I may know an answer for this one, there is a setting in the Game Controls to Automatically Level the ship, so that as soon as you come off Auto ilot or jump a gate the ship levels with the center plane of the sector, it is confusing at first, but I use it and I am liking it.

    I finally got back into space tonight, kind of boring, but it was nice to be back at the controls again
    Regards,
    Mike "Ears Hopin" P.

    Freedom , everyone enjoys it, very few defend it. - If You Won't Stand Behind Our Troops then feel free to stand in front!

    _________________________________________________
    "Let Being Helpful Be More Important Than Being Right!"

  7. #52
    SOH Mod Lionheart's Avatar
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    51
    Posts
    11,792
    My company at HQ were invited tonight to attend a 'Thanks Giving' ceremony tomorrow on Argon Prime!

    I didnt know they had Thanks Giving here..

    So.. I have had 3 freighters assigned to go out to the various Cahooona Meatsteak fascilities surrounding Argon Prime to see if they had surplus Turkey steaks.. They will bring them to the reandevous point and from there, they will be disperssed to either the main reception area or to homeless sections that have no food.






    Bill
    Humble Poly bender and warrior of Vertices

    <a href=http://www.prepar3d.com target=_blank rel=nofollow>http://www.prepar3d.com</a>

    iMac 24" Alum UniBody; Intel Core Duo 2.80 GHz;
    ATI Radeon HT 2600 XT; 1TB drive; 4 Gigs DDR Ram;
    Apple juice plasma injection system.

  8. #53
    SOH Mod Lionheart's Avatar
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    51
    Posts
    11,792
    NOV29_09

    Planting Advanced Sats along the Mid Southern Galaxy. Came accross Kha-Ahk fighters, approximately 7, in Ianunas Zura. Followed pursuit. Recieved much damage, lost shields, emergency warped to HQ in Argon Prime. Repaired the Nemesis, hyper jumped back to Ianunas Zura and finished kicking some Kha-Ahk boootock. Then 2 pirates entered the sector before I could hyper jump back to AP. Engaged the pirates. Took one down quite fast, but the second had a Elite fighter. Dogfight lasted quite a while. I ended up disengaging the last pirate, going after the Dukes Hazard waste vessel that 'also' came through that sector, and converting it to dust, then turned back to the pirate.

    Upon coming into range of the second pirate, firing vollies of lasers and electromagnetic rail launched debris at it, he blew up.

    I had also taken out a Dukes transport earlier.

    2 Dukes,
    2 Pirates
    7 Kha-Ahk

    Time to take the Nemesis home for a car wash, detail, oil the leather seats, super clean the windows, change the oil, and load up on some more missles..


    Humble Poly bender and warrior of Vertices

    <a href=http://www.prepar3d.com target=_blank rel=nofollow>http://www.prepar3d.com</a>

    iMac 24" Alum UniBody; Intel Core Duo 2.80 GHz;
    ATI Radeon HT 2600 XT; 1TB drive; 4 Gigs DDR Ram;
    Apple juice plasma injection system.

  9. #54
    Retired SOH Administrator Chacha's Avatar
    Join Date
    Mar 2008
    Location
    Sunshine State
    Posts
    5,128
    Quote Originally Posted by Lionheart View Post
    NOV29_09

    Planting Advanced Sats along the Mid Southern Galaxy. Came accross Kha-Ahk fighters, approximately 7, in Ianunas Zura. Followed pursuit. Recieved much damage, lost shields, emergency warped to HQ in Argon Prime. Repaired the Nemesis, hyper jumped back to Ianunas Zura and finished kicking some Kha-Ahk boootock. Then 2 pirates entered the sector before I could hyper jump back to AP. Engaged the pirates. Took one down quite fast, but the second had a Elite fighter. Dogfight lasted quite a while. I ended up disengaging the last pirate, going after the Dukes Hazard waste vessel that 'also' came through that sector, and converting it to dust, then turned back to the pirate.

    Upon coming into range of the second pirate, firing vollies of lasers and electromagnetic rail launched debris at it, he blew up.

    I had also taken out a Dukes transport earlier.

    2 Dukes,
    2 Pirates
    7 Kha-Ahk

    Time to take the Nemesis home for a car wash, detail, oil the leather seats, super clean the windows, change the oil, and load up on some more missles..


    You are three light days ahead on Ianunas Zura?

    How was the Thanksgiving Ceremony on Argon Prime?

    ..And don't forget the Vanilla flavored car perfume that you always have!

    Chacha



  10. #55
    SOH Mod Lionheart's Avatar
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    51
    Posts
    11,792
    ChaCha.. It was good. Celebrated again today back on the station.

    NOV26_09
    Earlier this morning I was out looking for passenger runs through the central corridors. Kept having issues in hauling people with my Split Iguanna Vanguard. Its supposed to be half passenger liner. (Fast as well). I did do some runs.. Paid only for a couple.. Even the easy ones!!!! arrghh.. I need to get faster at it.

    I tried attacking a Dukes Hazardous Materials ship with the Vanguard. It was embarrassing.. Later, I loaded up more missles, better brand, and some more potent weaponry.. Now he will not be able to laugh at me.

    While picking on the Duke ship, a swarm of Kha-Ahk came through the sector.. Man, its getting more frequent. I might start calling on the Tokyo..


    Bill
    Humble Poly bender and warrior of Vertices

    <a href=http://www.prepar3d.com target=_blank rel=nofollow>http://www.prepar3d.com</a>

    iMac 24" Alum UniBody; Intel Core Duo 2.80 GHz;
    ATI Radeon HT 2600 XT; 1TB drive; 4 Gigs DDR Ram;
    Apple juice plasma injection system.

  11. #56
    SOH Mod Lionheart's Avatar
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    51
    Posts
    11,792
    NOV26_09

    Brought back a purchased, beatup freighter yesterday, and its journey was taking too long, so I did my famous shuffle of Jump Drives, using the Elephant to hanger over a small craft that had JD. I switched it to the new Freighter, brought the small craft back to the hanger bay of the Elephant, dispatched back to Argon Prime. I then located some energy cells and hopped back to Argon Prime. Refitted original craft with another JD unit when back in home space.

    Decided to place another old used Buster into the Tokyo hanger fleet. Jumped it to Ceo's Buckzoid. I store the Tokyo at Ceo's Buckzoid). I was considering using the Tokyo to launch it on the next fleet of Kha-Ahk fighter raiders, and learn how to use the Carrier for wave launches..

    No sooner do I get there and have the Tokyo waiting in idle when two Cluster Kha-Ahk fighter groups fly into Ceo's space, lolol.. I have to learn fast. Dispatched Blue Wing (4 fighters) to cluster one, dispatched 2 seperate fighters to cluster one. Used Tokyo against cluster 2. Upon engaging the enemy when it was dispersing the Kha-Ahk fighters from the center hub carrier, the Tokyo rammed 2 of them taking them out. A slow dog fight ensued. When blue squadron had taken down cluster group one, I sent them into the furball with cluster two. At the end, even dreadnaughts from Ceos sector were in on the fight, and two huge Boron M1's as well. We pulverized the little geeks.. lol.. Lots of dust left over.


    Had to take some snappies during the battle. Pretty wild. I hadnt been through a giant naval battle yet, only seen them on YouTube.


    Bill
    Last edited by Lionheart; December 10th, 2009 at 18:57.
    Humble Poly bender and warrior of Vertices

    <a href=http://www.prepar3d.com target=_blank rel=nofollow>http://www.prepar3d.com</a>

    iMac 24" Alum UniBody; Intel Core Duo 2.80 GHz;
    ATI Radeon HT 2600 XT; 1TB drive; 4 Gigs DDR Ram;
    Apple juice plasma injection system.

  12. #57
    One-time Jarhead Craig Taylor's Avatar
    Join Date
    Jun 2007
    Location
    Woodbridge, Virginia, USA
    Age
    49
    Posts
    429
    I've finally made it into Teladi space, where they've retained my services to provide company security. The Borons have also made me an honorary member of their Queen's Guard. The Split don't like me much, though, and basically tell me to f-off whenever I stop to ask for directions.

    I've made my first million, and then some, thanks to some well-timed used ship sales and some generous donations from Dukes Hazardous Waste.

    I've still got my original Mercury freighter, as well as the super hauler, and both are working hard. I'm starting to consider some investment options, and am considering the purchase of my first station. I'm thinking of starting an ore mine somewhere to get the hang of the supply side. I'm hoping there is much profit...
    Craig "CB" Taylor
    Team AVSIM RTWR

  13. #58
    Jr. Admin gigabyte's Avatar
    Join Date
    Jan 2007
    Location
    Atlantic Canada
    Age
    55
    Posts
    2,031
    Quote Originally Posted by Craig Taylor View Post
    I've finally made it into Teladi space, where they've retained my services to provide company security. The Borons have also made me an honorary member of their Queen's Guard. The Split don't like me much, though, and basically tell me to f-off whenever I stop to ask for directions.

    I've made my first million, and then some, thanks to some well-timed used ship sales and some generous donations from Dukes Hazardous Waste.

    I've still got my original Mercury freighter, as well as the super hauler, and both are working hard. I'm starting to consider some investment options, and am considering the purchase of my first station. I'm thinking of starting an ore mine somewhere to get the hang of the supply side. I'm hoping there is much profit...
    Craig there is good profit in Ore mining, the trick is to find a nice safe asteroid with a good yeild. Your best bet is to invest in a mineral scanner first, then go on a little survey mission, just target the asteroid and select scan, you want something worthwhile, a yeild of 25 or better, 40 is great. Once you find a good suspect, make sure it is not too far from a good market, if you have to haul ore 5 or 6 sectors to sell it you run the risk of a nasty vaporizing your transport before it gets to market... I found out the hard way, I lost a full super freighter just before it reached the quantum tube plant I had directed it to... d@m pirates...
    Regards,
    Mike "Ears Hopin" P.

    Freedom , everyone enjoys it, very few defend it. - If You Won't Stand Behind Our Troops then feel free to stand in front!

    _________________________________________________
    "Let Being Helpful Be More Important Than Being Right!"

  14. #59
    SOH Mod Lionheart's Avatar
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    51
    Posts
    11,792
    You can set your freighters for AutoJump. Then they only are at risk in the pickup sector and the drop off sector.

    I so love seeing those bright flashes from ships that do a hyper jump from a stand still, lolol..



    Bill
    Humble Poly bender and warrior of Vertices

    <a href=http://www.prepar3d.com target=_blank rel=nofollow>http://www.prepar3d.com</a>

    iMac 24" Alum UniBody; Intel Core Duo 2.80 GHz;
    ATI Radeon HT 2600 XT; 1TB drive; 4 Gigs DDR Ram;
    Apple juice plasma injection system.

  15. #60
    Retired SOH Administrator Chacha's Avatar
    Join Date
    Mar 2008
    Location
    Sunshine State
    Posts
    5,128
    Quote Originally Posted by gigabyte View Post
    Craig there is good profit in Ore mining, the trick is to find a nice safe asteroid with a good yeild. Your best bet is to invest in a mineral scanner first, then go on a little survey mission, just target the asteroid and select scan, you want something worthwhile, a yeild of 25 or better, 40 is great. Once you find a good suspect, make sure it is not too far from a good market, if you have to haul ore 5 or 6 sectors to sell it you run the risk of a nasty vaporizing your transport before it gets to market... I found out the hard way, I lost a full super freighter just before it reached the quantum tube plant I had directed it to... d@m pirates...
    Thanks thats a good advice.... I had a water purification plant (I cheated) but not cheated enough.... I thought i can have a lot of money billions of money.... man I should know who to trust....

    My goal was to have a fleet.... I have to start reading and make more money and do more missions.... and trust no one!

    Chacha



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. GTA IV HIGHWAY PATROL + Junior Brown - Highway Patrol Song
    By Cirrus N210MS in forum The NewsHawks
    Replies: 3
    Last Post: January 31st, 2011, 19:01
  2. X3 Patrol Logs
    By Lionheart in forum The NewsHawks
    Replies: 71
    Last Post: December 1st, 2009, 12:18
  3. Anyone interested in real navigator logs
    By freddienet in forum CFS3 General Discussion
    Replies: 5
    Last Post: March 27th, 2009, 06:14

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Avsim - Flightsim - SimFlight - Simviation - iflyonline - CFS IP - Quarter Moon Saloon - Com-Central