upcoming GAS Waco - beta
Results 1 to 21 of 21

Thread: upcoming GAS Waco - beta

  1. #1

    upcoming GAS Waco - beta

    the New UBF-2 Waco from Golden Age Simulations is being pulled out onto the apron for walk around..looks good, no oil streaks, fuel leaks or excessive wear. Flying and Control wires are tight and free from wear
    or corrosion, fabric covering is tight and shows no tearing or seam separations. Control surfaces are free and easy. No apparent engine leaks - all wiring connections are good and the prop is clean.



    enter..the Sandman

    visit Heywood Planes - YouTube

  2. #2
    ok - engine and instrument checks complete - mag check and engine RPM in the green and the tanks topped off ready on the active for a quick circuit at Cottonwood IL57








    beauty - no need for full throttle as this airplane was built for speed.
    the installer lets you choose FSX boxed, FSX:SE or P3D
    the package includes the SPB in Peru for the float equipped 'explorer' version *cough* Raiders of the something something *cough*
    as well as the Wilmington 'Catalina' terminal and the Catalina Island SPB AND the Poughkeepsie airfield scenery from previous GAS releases. All very well executed.
    enter..the Sandman

    visit Heywood Planes - YouTube

  3. #3

  4. #4
    a relatively short squawk list so far could mean a short wait for general release -
    For my part it would be a plus if a landing light could be added for my favorite dawn/dusk flight environment and maybe a removable forward cockpit cover option..aka the Alabeo UPF-7
    but it is not critical to my extreme happiness with this GAS beauty as it sits. I think everyone will be pleased with the package that includes 4 nice scenery areas and both wheeled and float equipped versions of the F-2
    Great job again by the GAS house team - many thanks
    enter..the Sandman

    visit Heywood Planes - YouTube

  5. #5
    Looks like one I might have to have a go with.
    USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
    My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d

    Current System Specs:
    FSX/Accel | Windows10 64bit
    Motherboard: MSI760GM-E51(MS-7596)
    CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
    GPU: NVidia GTX 970 (4GB GDDR5)

  6. #6
    it's a real smile inducer, Falcon

    I should mention I use Win7 64 FSX Boxed and none of these screenshots are edited in any way.
    Frame rates are as usual with GAS aircraft unaffected by this model.
    enter..the Sandman

    visit Heywood Planes - YouTube

  7. #7

  8. #8
    Senior Administrator Roger's Avatar
    Join Date
    Oct 2000
    Location
    EGCD...they bulldozed it!
    Age
    71
    Posts
    9,775
    Here's some from me...lovely looking aircraft!







    SYSTEM :
    OS:Win7 Home Premium 64 bit UAC OFF!
    DX version Dx10 with Steve's Fixer.
    Processor:I5 4670k overclocked to 4.4 gHz with Corsair CW-9060008-WW hydro cooler
    Motherboard:Z87
    RAM:16 gig 1866 gigaHz Corsair ram
    Video Card:MSI 1070 8 gig ram
    HD:2Tb Samsung 850 evo SSD

    To err is human; to forgive is divine

  9. #9
    Senior Administrator Roger's Avatar
    Join Date
    Oct 2000
    Location
    EGCD...they bulldozed it!
    Age
    71
    Posts
    9,775
    ...and one more...

    SYSTEM :
    OS:Win7 Home Premium 64 bit UAC OFF!
    DX version Dx10 with Steve's Fixer.
    Processor:I5 4670k overclocked to 4.4 gHz with Corsair CW-9060008-WW hydro cooler
    Motherboard:Z87
    RAM:16 gig 1866 gigaHz Corsair ram
    Video Card:MSI 1070 8 gig ram
    HD:2Tb Samsung 850 evo SSD

    To err is human; to forgive is divine

  10. #10
    Thanks Roger, I was hoping no one would post that screw up - Yup,, I somehow sent Paul a texture with the N number on the wrong wing (old age, too much or too little coffee, pick an excuse). Now fixed and on the bottom of the bottom wing.

  11. #11
    Senior Administrator Roger's Avatar
    Join Date
    Oct 2000
    Location
    EGCD...they bulldozed it!
    Age
    71
    Posts
    9,775
    Ooops...glad it's fixed
    SYSTEM :
    OS:Win7 Home Premium 64 bit UAC OFF!
    DX version Dx10 with Steve's Fixer.
    Processor:I5 4670k overclocked to 4.4 gHz with Corsair CW-9060008-WW hydro cooler
    Motherboard:Z87
    RAM:16 gig 1866 gigaHz Corsair ram
    Video Card:MSI 1070 8 gig ram
    HD:2Tb Samsung 850 evo SSD

    To err is human; to forgive is divine

  12. #12
    Quote Originally Posted by TeiscoDelRay View Post
    Thanks Roger, I was hoping no one would post that screw up - Yup,, I somehow sent Paul a texture with the N number on the wrong wing (old age, too much or too little coffee, pick an excuse). Now fixed and on the bottom of the bottom wing.
    hey - don't beat yourself up TDR, that's the bosses job...
    All the paints look great - I couldn't find any thumbprints or runs anywhere - and I looked.
    ..just the one reg. mishap so yer batting .900 or so - get you in the HOF an average like that



    enter..the Sandman

    visit Heywood Planes - YouTube

  13. #13
    a couple more..






    nice bright yellow with polished aluminum struts...
    enter..the Sandman

    visit Heywood Planes - YouTube

  14. #14
    At the urging of the team an single seat closed front 'pit version is added along with the full light package and a throw back livery to FS 2004




  15. #15
    Another addition? That's what is so great about you guys, you make so many versions in one release. I'm looking forward to it and thanks for the "Single" cockpit version.

  16. #16
    Quote Originally Posted by Spad54 View Post
    At the urging of the team an single seat closed front 'pit version is added along with the full light package and a throw back livery to FS 2004

    *GASP* Oh that looks GOOOD..as do the retractable landing lights...
    The airplane was rolled out to the Beta test group in practically flawless condition..Ready for Flight. Since we couldn't find anything wrong we decided to
    ask them fellers at GAS for stuff we WANTED instead...just to keep them honest as it were. Being first rate - they went ahead and filled our list. Thank you, Gil, Jim, TDR and Paul
    and if I missed anyone - Thank You too.
    enter..the Sandman

    visit Heywood Planes - YouTube

  17. #17
    Senior Administrator Roger's Avatar
    Join Date
    Oct 2000
    Location
    EGCD...they bulldozed it!
    Age
    71
    Posts
    9,775
    Thanks for the two-tone blue livery, Paul
    SYSTEM :
    OS:Win7 Home Premium 64 bit UAC OFF!
    DX version Dx10 with Steve's Fixer.
    Processor:I5 4670k overclocked to 4.4 gHz with Corsair CW-9060008-WW hydro cooler
    Motherboard:Z87
    RAM:16 gig 1866 gigaHz Corsair ram
    Video Card:MSI 1070 8 gig ram
    HD:2Tb Samsung 850 evo SSD

    To err is human; to forgive is divine

  18. #18
    Quote Originally Posted by Roger View Post
    Thanks for the two-tone blue livery, Paul
    Most welcome. Also all textures in the package will be interchangeable with all versions. For example


  19. #19



    this paint scheme looks good on floats...
    I have been rediscovering the PNW seaplane bases - I didn't realize what a rut I was in.
    There is a ton of scenery I haven't really been using and now I have the perfect traveler for it.
    enter..the Sandman

    visit Heywood Planes - YouTube

  20. #20

    my emai service is down - but I got the .cfg seaplane update

    Cant send emails just now so I am posting here.
    The updated .cfg file is GOOD

    also PM'd the Skipper
    enter..the Sandman

    visit Heywood Planes - YouTube

  21. #21
    Here is the fresh out of the "Cheap Seats Studios" oven, promo video - use the youtube link to go to the full screen HD 1080p version as this small window version seems a bit dark for some reason. https://youtu.be/4OLxep8CQ7Y

    <iframe width="560" height="315" src="https://www.youtube.com/embed/4OLxep8CQ7Y" frameborder="0" allowfullscreen=""></iframe>

Members who have read this thread: 0

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •