Ian, the link with the P3Dv4 updates I provided a few days ago is just a simple ZIP with only the new/changed files.
For the full native FSX pack, search the AVSIM library for: alphasim_viggen_fsx_native_v2.zip
Henk.
Ian, the link with the P3Dv4 updates I provided a few days ago is just a simple ZIP with only the new/changed files.
For the full native FSX pack, search the AVSIM library for: alphasim_viggen_fsx_native_v2.zip
Henk.
Many thanks Henk, very much appreciated.
Regards,
Ian
I have been reading up on the SFI AJ37 flight manual and with the help of part 2 (formely secret) done some adjustments to the fuel entry in the cfg file in order to replicate the capacity and location of the tanks on the Viggen. this has also been done to the location of the store pylons. The current hot rod have the Jakt Viggen engine power and this is not realistic for the AJ/SH, I have made a separate folder for the AJ/SH/AJS models with the RM8A engine. See entries below
Change the fuel entry:
[fuel]
//Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons)
//5000 liter intern + 1500 liter extern
fuel_type = 2
number_of_tank_selectors = 1
electric_pump = 1
Center1= 5.000, 0.000, 0.000, 929.000, 5.000
LeftMain = -5.000, -6.000, -1.500, 614.000, 5.000
RightMain = -5.000, 6.000, -1.500, 614.000, 5.000
External1 = 7.400, 0.000,-4.500, 348.000, 5.000
fuel_dump_rate=0.01
Stores:
[weight_and_balance]
max_gross_weight = 45000
empty_weight = 26896
reference_datum_position = 0.000, 0.000, 0.000
empty_weight_CG_position = 0.000, 0.000, 0.000
empty_weight_pitch_MOI = 130981.000
empty_weight_roll_MOI = 65720.000
empty_weight_yaw_MOI = 110426.000
empty_weight_coupled_MOI= 0
CG_forward_limit= 0.000
CG_aft_limit= 1.000
max_number_of_stations = 4
//-----------------------------------------...............
station_load.0 = 0, 7.40, 0.00, -4.50, C-Tank //1 Center tank 200 lbs
station_load.1 = 0, 7.00, 0.00, -4.20, Fuselage //2 Fuselage (AJ): Bofors M70 rockets x2 = 1760 lbs // Fuselage (JA): Sidewinders x2 = 400 lbs / AMRAAM x2 = 700 lbs / A2A racks = 20 lbs
station_load.2 = 0, -4.00, 0.00, -4.00, Wings Inner //3 Wing Inner (AJ): Bofors M70 rockets x2 = 1760 lbs //Wing Inner (JA): Skyflash x2 = 850 lbs / AMRAAM x2 = 700 lbs / A2A racks = 20 lbs
station_load.3 = 0, -10.00, 0.00, -3.80, Wings Outer //4 Wing Outer: Sidewinders x2 = 400 lbs / A2A racks = 20 lbs
AJ/SH RM8A engine:
[TurbineEngineData]
//Volvo RM8A 14.600 lbs dry thrust, 25,800 lbs w afterburner (ratio 1.7352)
fuel_flow_gain= 0.002
inlet_area= 4.00
rated_N2_rpm= 26500
static_thrust= 14600
afterburner_available=6
afterburner_throttle_threshold = 0.80
reverser_available=1
ThrustSpecificFuelConsumption = 0.64
AfterBurnThrustSpecificFuelConsumption = 2.52
Best regards
Jens-Ole
Repainting since FS5..
Any feedback on these mods are welcome!
For me the aircraft wobble back and fort in the yaw axis at lower speeds (both before and after my mods), do any of you fm guru's have some advise to make it more stable?
Best regards
Jens-Ole
Repainting since FS5..
I'd say check your vertical tail area and location. Or simply crank up yaw stability. Or add a yaw damper.
If you want to fix the problem at its source, this is your guide:
https://www.fsdeveloper.com/forum/re...msfs-v1-0.169/
Any chance for the re-mapped (fixed version) to be done for fs2004 as well since this addon was originally for that platform?
Henk is the mastermind behind the model rework. But I think the reworked model has moved so much away from the FS2004 format that it is not a straight forward job to make it FS2004 compatible.
Best regards
Jens-Ole
Repainting since FS5..
Bookmarks