...maybe its time to chat with the builder.
...maybe its time to chat with the builder.
I believe that all the lights are controlled by that file. Since the file exists (mine was quarantined by my AV program) and you have exterior lights, you should have interior lighting as long as you have power. Not sure what else to look for. Sorry.
-- WH
If at first you don't succeed, try, try,try again. ... or go read the manual.
... appreciate your effort , think I'II make an appointment with the MilViz service department.
Cheers once again !
I'm 99% sure that i know the fix to your problem with night lighting. I'm also 100% sure that as a MV team member i cant offer you support outside of the MV support forum. Rest assured I too had a "problem" with it and you'll be searching for a long time unless someone points the "fix" out to you.
MACH 3 DESIGN STUDIO
Heatblur Rivet Counting Squad™
Aircanuck & Rick,
Glad to hear I'm not the only one with the night lighting issues. I didn't even notice until I tried a night flight this evening. My symptoms and circumstances mirror Canuck's exactly. I'll pop over to the F-100 Support Forum and keep an eye out for the fix.
The odd thing is, when in external view, I can see the night VC lighting - but when viewing from the VC itself, it's as black as night.
Still love this plane, though. I can't get over how smoothly it runs.
-Mark
The Danish Air Force used paint that weathered almost as fast as it was applied. I lifted this color of a hi-res pic I had, but I have the feeling it is a bit too light. Being colorblind doesn't help either. Would anyone have the RGB codes for the original paint that was used by the RDAF?
And I continued with the French sharkmouth:
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
Jankees, according to amarc.dk , the early matt green colour is FS 34079 (R 66 G 63 B 44 / hex #423f2c ), it was introduced in 1968. When it started to weather, it became more grey-ish. In the late 70'ies they started to use a gloss green variant: FS 14079 (R 81 G 82 B 64 / hex #515240).
If I look at your screenshots, your paints look quite right to me. Others have mentioned this before: It would be nice if MV could do an export model without refuel probe and with the surplus F-102 engine exhaust...
Can I add my name to the growing list of folk in the dark (literally) re' internal lighting
ATB
DaveB
It looks good to me Jankees
That paint scheme certainly went through some dramatic changes through aging.
The USAF would have those birds in the paint barn every three days just to keep the higher ups from having a stroke.
See, Hank's version is darker!
But nevermind, you seem to like the color, so here you go: http://aussiex.org/forum/index.php?/...r-force-g-177/
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
and you can try the French one as well: http://aussiex.org/forum/index.php?/...orce-411-jura/
I hope you'll like them, and if you do, do post a screenshot please?
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
Jankees or Hank: would you perhaps consider a skin of the 32nd TFS based at Soesterberg Air base? This link gives many photos of several examples:
https://www.google.nl/search?q=32+TF...AQIIg&dpr=1.85
Those bare aluminium aircraft can be a lot shinier than the camouflaged ones. Realistic or not, I like the shine of some of the skins in the Milviz package.
Thanks,
Stickshaker
Hej Jankees
Thanks a lot for the Danish F-100 versions. They came in quite a lot different flavours of green and brown.
And you are quite right. It fell off as soon as they could apply it
Here is a site where you can see the different coulours : https://www.flickr.com/photos/alfblu...57623186814480
They also came in some nice silver/grey paint variations.
Soeren
How is everyone doing on the manual bombing?
Low angle seems easy,
20 degrees seems to suit me.
30 degree is still a work in progress for me.
The hardest part is estimating the correct roll in point for me at least
For what it is worth I cast a vote against many more chrome planes
Silver yes, camo yes, chrome no!
None of the metal planes have been "Chromed". However if you would like to see what an actual "Chromed-out" plane would look like...I'd be happy to provide the comparison. Not the same as reflective aluminum. I'll be doing that FW-221 Danish ...or attempting to at some point here in the near future.
MACH 3 DESIGN STUDIO
Heatblur Rivet Counting Squad™
Bill Leaming
3d Modeler Max/GMax
C & XML Gauge Programmer
Military Visualizations
http://milviz.com
Intel® Core™ i7-3770k 4.2GHz - Crucial 16GB DDR3 - Dual Radeon HD770 1GB DDR5 (Crossfire) - Eco II Watercooling - Win7 64bit
Intel® Core™ i7-2600k 3.4GHz - Crucial 8GB DDR3 - NVIDIA EVGA GTX-770 SC 4GB - Win7 64bit
Hi,
The main reasons the night lighting (VC only) doesn't work are as follows:
1) you did not download and install the product with your AV off and totally disabled.
2) your AV, once enabled again, has removed the files so you must then exclude those files (recommended to exclude the whole sim directory).
3) If you're running P3D, disable the Estonia tool as this is a known conflict with our night lighting system.
4) you're not running the sim as an administrator (right click on the icon and choose run as admin).
5) you have not disabled UAC (google if your friend)
6) you are trying to use ctrl L to turn them on. (this will not work. You MUST follow proper procedure(s) to get the lights on.
This information also goes for the Simworks F-4B as it uses our tech for the night lighting (as we use some of theirs for our upcoming F-4 Tacpack(s).
We hope to have our site and the forums live by tonight.
Thank you.
Kat.
My issue was the Estonia migration tool. One additional reason beyomd what Kat mentioned isnthat you may have failed to install the required MS C++ redistributable libraries. All the mentioned reasons are covered in the user guide for resolution. Outside of this, should probably need to wait for the support forums to assist you. Unless Kat says otherwise.
MACH 3 DESIGN STUDIO
Heatblur Rivet Counting Squad™
Please tell me this is a troubleshooting step for some people with unusual configurations and not a requirement to get full day/night functionality.
I was about to purchase this, but not if I have to compromise the security of my system to use it.
UAC is annoying, but it serves a very useful purpose in making sure low-level apps aren't installed without your knowledge.
That was the only possible place for me to look too and sure enough, I have internal lights. However.. I now get the undesirable 'Are you sure you want to run this program' warning box when I double-click the FSX icon. Not sure which is more annoying.. having no internal lighting or having to 'accept' FSX when I run it
ATB
DaveB
Toul-Rosières 1967/1976
very nice! Where can I find this?
just a question in general: shouldn't those red stripes on the rear of the fuselage continue underneath the aircraft?
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
Bookmarks