I cant seem to get this thing off the runway I thought I may have to set the trim but even that hasnt done anything.
I cant seem to get this thing off the runway I thought I may have to set the trim but even that hasnt done anything.
I've no idea what you could be doing. The Nimrod is a great model and a great flyer. Where are you trying to take off from?
ATB
DaveB
No problem here to get her in the air! No idea what could be the cause.........
Cees
BTW: thanks for reminding me of this wonderful freeware offering! Great model!
Accidentally used the wingfold command?
Intel i9-13900 Raptor Lake , Be Quiet! Dark rock slim cooler, 32 Gb Corsair DDR5 RAM, MSI Z790 Tomahawk motherboard, Asus RTX 4060Ti 16Gb, Thermaltake 1050 Watt PSU, Windows 11 64-bit 1 m2, 4 SSD, 2 HDD.
She should get off the deck easily from Kinloss. Leave the trim alone for now and set 1 notch of flap. Incidentally.. we had a Nimrod QFI on the team and while this guarantees nothing, the flight model is well within the bounds of reality
EDIT: A thought occurred. Look to the LH of the pilots seat and you'll see a panel with icons for map, radio e t c. One is for kneepad. Bring this up and you'll see a reference page. Make sure you fly to the flap settings and take off speeds listed. Full up.. she's a heavy girl and I get a feeling you're trying to rotate too early. This will only extend your takeoff run. At full weight.. pull back on the stick at around 150kts (no less) and you'll ease off the deck with plenty of room to spare.
ATB
DaveB
Tom, I wonder if your default flight... from which you build your Nimrod flight is one of the default FsX aircraft? If not it may affect some parameters of the Nimrod.
SYSTEM :
OS:Win7 Home Premium 64 bit UAC OFF!
DX version Dx10 with Steve's Fixer.
Processor:I5 4670k overclocked to 4.4 gHz with Corsair CW-9060008-WW hydro cooler
Motherboard:Z87
RAM:16 gig 1866 gigaHz Corsair ram
Video Card:MSI 1070 8 gig ram
HD:2Tb Samsung 850 evo SSD
To err is human; to forgive is divine
One of my fav freeware models, always worked great for me. Like Roger the default flight would be a good place to start.
A2A Simulations
http://a2asimulations.com/
I had that happen once...I got so frustrated I pushed the Y key then F4 until I got to a certain height and pushed the Y key again and it just kept diving...then I pushed the Z key and it flew like a champ. I landed and saved a default flight.
Vivat Christus Rex! Ad maiorem Dei gloriam
Overweight?
Windows 7 Professional 64 bit, 16 Gigs Ram
Cooler Master HAF 932 Tower
ASUS P7P55D Deluxe
Intel Core i7-860 Lynnfield Quad-Core 2.8 GHz LGA 1156
ZOTAC GeForce GTX 1050 Ti 4GB 128-Bit GDDR5
SCEPTRE 27"
WD Black 1 TB
ASUS Xonar DS 7.1
CORSAIR K95 RGB Platnum XT, PBT double-shot keycaps, Cherry MX Blue
Logitech M510
It's not that mate (or shouldn't be). The Nimrod loads well under weight.. full of fuel but without any bangers in the belly It's either his default flight (he could be choosing the Nimrod without loading a default model first) or he's trying to take-off out of cfg. Out of config covers a multitude of sins I know but there's no good reason for the Nimrod not to get off the deck.
ATB
DaveB
I don't remember the specifics, but I could not get the aircraft off the ground. Went to the fuel and payload page and saw that both fuel and payload were way overweight. Check the fuel and payload page to make sure that's not the issue.
Jay
USNR-Ret; Former Airline Migratory Worker; Builder, Owner, Operator RV-8 N817J
Comp Spec - ASRock Steel Legend WiFi M/B, Ryzen 7 5800X, RX 6900 XT, 32GB RAM, M2 SSD for DCS, SATA SSD for MSFS2020
Its not the weight I always reduce that before loading the flight ill give it another go and see what happens.
Windows 7 Professional 64 bit, 16 Gigs Ram
Cooler Master HAF 932 Tower
ASUS P7P55D Deluxe
Intel Core i7-860 Lynnfield Quad-Core 2.8 GHz LGA 1156
ZOTAC GeForce GTX 1050 Ti 4GB 128-Bit GDDR5
SCEPTRE 27"
WD Black 1 TB
ASUS Xonar DS 7.1
CORSAIR K95 RGB Platnum XT, PBT double-shot keycaps, Cherry MX Blue
Logitech M510
It's NOT weight guys. The MR1 loads (default) 167686lbs. MGW is 192000lbs so at default load.. it's 24314lbs shy. It will get off the deck at Kinloss easy at this weight, even without any headwind. Push the taps to the stops.. wait for 150kts then rotate.
Are you sure you have the FSX model Tom?
ATB
DaveB
Bookmarks