Inspired by A2A Piper Cherokee - Page 6
Page 6 of 6 FirstFirst 123456
Results 126 to 135 of 135

Thread: Inspired by A2A Piper Cherokee

  1. #126
    More progress..
    Attached Thumbnails Attached Thumbnails B688FC0E-C2BA-4960-ABFE-6CA8E5CD9952.jpg   21DD2BF7-906B-468B-AFA3-34B672C2011C.jpg  
    enter..the Sandman

  2. #127
    I like to look in from time to time and I'm always impressed!
    My own time is a bit overwhelmed at this point to even consider model building, the urge is there, but RL is keeping me on a short leash.
    "Illegitimum non carborundum".

    Corsair Obsidian 900D Full Tower. MSI X99A XPOWER GAMING TITANIUM. Intel Core i7 Extreme Edition 5960X Haswell-E LGA2011-3 8 Core @ 4.8GHz. Thermaltake Water 3 Riing RGB Cooler Premium Edition 6 x Riing 12 fans. Galax GeForce GTX 1080 HOF 8GB x2 SLI.
    Corsair Dominator Platinum 32G 2800MHz DDR4 Kit. LG BH16NS40 BluRay Reader/Writer. Corsair CMPSU-HX1000i FM 1000Watt x2.
    Samsung 850 EVO 500GB SSD x 3. Samsung 850 EVO 1TB SSD x1.
    Western Digital WD Gold 4TB Datacenter HDD.

  3. #128
    Iím just trying to keep up morale as it has been a tough go for a bit too long.
    I appreciate your kind encouragement and thank you.
    Working on these projects clears my head and keeps me moving forward.
    enter..the Sandman

  4. #129
    I have the floats assembled with their struts. I have substituted aluminum tubing for the strip platic supplied bu the kit mfg. because it looks better, will be stronger over time, and because I dont need the floats to flex on hard landings. Hopefully as a display model there wont be any of those.
    So I still need to make the horizontal tail, and the propellers. Then begins final assembly and sanding / sealing, primer and paint.
    But this is the home stretch I guess.
    Attached Thumbnails Attached Thumbnails 0A2955EE-C13F-4367-90BF-2B3378710E96.jpg  
    enter..the Sandman

  5. #130
    The modified nacelles turned out pretty well I think. The modification was not difficult at all as it turns out. I was sweating it early on though. I used cowlings from the guillow Catalina kit which I used as patterns to cut 1/16Ē thick balsa circles of the same diameter. One of each of these circles were attached to the faces of the existing kit supplied oval bulkheads used to make the Ranger nacelles forward of the wing leading edge. Additional circles were each used as the new radial engine firewalls and inserts flush inserted at the back of each cowling as a mating surface to the nacelles. The diameter matched to the overall outer dimensions of the original oval bulkheads perfectly.
    enter..the Sandman

  6. #131
    Tail area is complete...I have sealed and sanded the fuselage / tail and the wing and will paint these two components seperately prior to assembly.
    Attached Thumbnails Attached Thumbnails 0C4257E7-8885-4669-894E-48872F734464.jpg   E6D176D6-8984-4373-BA73-DC208A3EB287.jpg  
    enter..the Sandman

  7. #132
    Spruce Gosling...
    Attached Thumbnails Attached Thumbnails 2892B201-9A69-4D5F-A862-8A37B4A27972.jpg  
    enter..the Sandman

  8. #133
    Props are fabricated. Now just need to be sanded and sealed before painting.
    When I purchased the cowling sheets from Guillows (Catalina) for use on this model the sheets included other components including these very nice propeller hubs..
    all I had to do was carve the blades.
    Attached Thumbnails Attached Thumbnails A2DADC62-D387-47B3-B33F-6CDC9F15E295.jpg  
    enter..the Sandman

  9. #134
    The paint scheme for this model will be the Coast Guard natural alum fuselage, tail and nacelles with the yellow wing top. It will have a black anti-glare panel in front of the windscreen and possibly on the cowlings too ( inner half nearest the pilot on both cowls) and even though the r/l aircraft still has its Ranger inline engines on it I think this model will look good in those clothes with its radials and round cowlings. Hope so anyway
    enter..the Sandman

  10. #135
    The prop blades have only been shaped and sealed with the initial coat of sealer. As I sand and seal probably three to five more times these propellers will be reduced to the proper scale..as long as Iím carefull
    enter..the Sandman

Members who have read this thread: 50

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •