stoney,
email me at:
dea14u@aol.com
I can forward the original and you can see what you can do ??
Any improvements to the project are always welcomed.
Dave
stoney,
email me at:
dea14u@aol.com
I can forward the original and you can see what you can do ??
Any improvements to the project are always welcomed.
Dave
http://www.TheFreeFlightSite.com
"Laissez les bon temps rouler"
Dave,
Any chance you could post the original Razbam panel.cfg here? If it had a VC displaying originally, it must be something simple, like a incorrect bitmap filename.
Here is the original panel and gauges that came with it.
Org_Panel.zip
Let me know what ya'll come up with,
Thanks,
Dave
http://www.TheFreeFlightSite.com
"Laissez les bon temps rouler"
Dave,
My hunch was right.I changed your VC entry
[Vcockpit01]
Background_color=0,0,0
size_mm=1024,1024
position=7
visible=1
ident=
pixel_size=1024,1024
texture=$primary_panel instead of $A1H-vc
& now I get gauges showing. The positions are wrong, but they show, & are dynamic (needles move in response to a/c movements).
When I get some free time I will try to use the multiple VC entries in the original panel.cfg you posted above & change the gauges used to similar CFS2 gauges that we know are CTD free using Notepad. It should then just be a question of fine tuning the positions to fit the cockpit view.
Check mail Dave...
![]()
♠♠
"If you're in a fair fight, you didn't plan it right"
...standing down, looks like Bearcat already has it covered![]()
Thank you everyone for the time and efforts.
Bearcat got a copy to me and I will have it up on the site
later today for All to enjoy.
Dave
http://www.TheFreeFlightSite.com
"Laissez les bon temps rouler"
I'm making a few mods to my setup Dave. I want to get a little closer to this virtual : http://www.nmusafvirtualtour.com/med...20Cockpit.html
While you're browsing, check this out too: http://www.navalaviationmuseum.org/n...PITS/A-1H/A-1H
(COCKPITS link at the bottom banner)
♠♠
"If you're in a fair fight, you didn't plan it right"
OK Sir,
I will hold off on posting.........Hope you do not mind
But I had a special request from one our Viet fans so
I mailed him a copy of the one you sent, with the
understanding that you were working on improvements.
Not sure how you can make it better, but we are all on
pins and needles.
Thanks again to all of our project contributors,
Dave
http://www.TheFreeFlightSite.com
"Laissez les bon temps rouler"
Well bearcat really did a great job on this one:
2D and full VC panel with gauge package
![]()
A1-E Skyraider Panel with full VC (click image to enlarge)
By DJ Tiggs
*Gauges are a mix of stock and unknown 3rd parties
*Close to authentic gauge layout
*2D and VC with multi panel views
*gauge package included
*intended for the CFS2 A1-E....Here
Please be sure to check it out here:
http://www.thefreeflightsite.com/Panel3.htm
Enjoy,
Dave
Last edited by No Dice; March 9th, 2016 at 11:06.
http://www.TheFreeFlightSite.com
"Laissez les bon temps rouler"
Gee, I don't know No Dice, But I get an immediate CDT with the new panel(s). UncleTgt's panel seems to be the only one that works for me. I can't find the problem, but I feel it must be something obvious, I just don't see it.
Do not fear the enemy, for they can take only your life. Fear the media far more, for they will destroy your honour.
stoney,
make sure that you added the gauges to the "gauges" file,
when I first dragged and dropped them they ended up in my Fonts folder.
I have checked the download:
http://www.thefreeflightsite.com/Panel3.htm
and I did the screen shot from the screen....
Maybe make sure you are not using the original that I posted
in a lower thread...??
Dave
http://www.TheFreeFlightSite.com
"Laissez les bon temps rouler"
Thanks No Dice. I re-D/L both Skyraider and new panel. Works just fine. really like that sound too!
Do not fear the enemy, for they can take only your life. Fear the media far more, for they will destroy your honour.
stoney.........or anybody interested
I am slowly converting Alessandro Cimenti's Viet missions to work with
the new terrain ect. Setting up the runways, updating the aircraft and
many of the objects ect. First getting them to load to mission builder then
getting rid of the errors when attempting to load in the Sim and now trying
to move the ground units to fit the terrain is a bit overwhelming to a novice
mission writer like myself. Plus..I have no time at this point to actually test them.
I have a handful that are ready to test, improve or suggest improvements.
Any help will be much appreciated,
Dave
dea14u@aol.com
http://www.TheFreeFlightSite.com
"Laissez les bon temps rouler"
Hey All,
I am up and running again. I don't have my software working yet, but my comp is fully operational. I have to get my Win 7 rig running. I don't want to cook this one again.
Dave, Allen, Thank You very, Very, VERY MUCH, for all your help. I'll be intouch with both of you real soon. For now I have to get everything reinstalled and setup. Then copy it all back in. It will be a few weeks before I'm ready to start working on stuff again.
'til Later,
John
"Courage is the discovery that you may not win, and trying when you know you can lose."-Tom Krause
My works Here: http://www.thefreeflightsite.com/JFortin.htm
Attachment 35954
*runs_away_from_zombie_post*
"Let Being Helpful Be More Important Than Being Right!" Some SOH Founder.
LMAO...
Yea I'm here. Limped in on a wing and a prayer. I have the basics running. I'll get the rest as my time permits. I'm guessing a month before I'm ready to get back into everything. Although one good rainy week could speed things up.
"Courage is the discovery that you may not win, and trying when you know you can lose."-Tom Krause
My works Here: http://www.thefreeflightsite.com/JFortin.htm
It shouldn't take that long to get most of the things back up. CFS2, gMax, Model Converter X, MK MDLC and BGL Analyze than the old workshop is back. Will you need the mdlc_190_weap and the Make Weapon.bat I made for you?
"Let Being Helpful Be More Important Than Being Right!" Some SOH Founder.
bearcat found a minor problem with his A-1E panel and has made an update.
Quote:
I found a flaw in the oxy gauge bmp on the ECU window. Made the correction with another edited gauge by another name.
I have re uploaded it for all:
![]()
A1-E Skyraider Panel with full VC (click image to enlarge)
By DJ Tiggs
*Gauges are a mix of stock and unknown 3rd parties
*Close to authentic gauge layout
*2D and VC with multi panel views
*gauge package included
*intended for the CFS2 A1-E.
http://www.thefreeflightsite.com/Panel3.htm
Dave
http://www.TheFreeFlightSite.com
"Laissez les bon temps rouler"
HEEEE'S BAAAACKKK!!!
Welcome home BH23, you have been sorely missed. I had a similar problem, lost both my XP desktop gaming rig, then 2 days later my Win7 laptop that is my internet-safe rig. had to do with the most moronic, alleged "Smart"phone in existence. Typing on a virtual keyboard where 3 keys can be covered with 1 fingertip.
AAF Lament:
"Glory! No more regulations!
Rip them down at every station!
Ground the guy that tries to make one!
And LET US FLY LIKE HELL!"
From "There I Was...Flat On My Back" by Bob Stevens
Tune: Battle Hymn of the Republic
Hey all,
Do not fear that I have lost anything, the project has become so large
that I am having to bust up the pages,
We now have 2 aircraft pages:
http://www.thefreeflightsite.com/Aircraft_CFS2_7.htm
http://www.thefreeflightsite.com/Aircraft_CFS2_8.htm
Thanks again for all the work ya'll have put in on this project.
Dave
http://www.TheFreeFlightSite.com
"Laissez les bon temps rouler"
The next project sitting on the back burner.
http://simviation.com/hjg/aircraft/boeing/kc-135.htm
![]()
DV,
Dude that will be great......I can't wait to see it,
Dave
http://www.TheFreeFlightSite.com
"Laissez les bon temps rouler"
Bookmarks