The Fravin C150 L upgraded to FSX & P3D

[lagaffe]

You can now download one the best freeware created for FS2004 which is now useable on FSX-SP2/Acceleration Dx10 and Prepar3D v2.

This migration has been done with Fravin agrement. In June 2013 I was contacted by one of two authors who sought a modeler who would have the patience and willingness to make a FSX version of this aircraft. It is with pleasure that I accepted and after 6 months of work here is the first release. Other changes are in progress and version 2.0 should be available by the first half of 2014

This aircraft "a Cessna 150L Aerobat" which have been compared to some paywares, has been migrated on FSX. This a/c has nice animations and is a joy to fly and look at also, as the paint jobs are (visually) some of the best and most refined schemes on Cessna high-winged single-engined.

I strongly advise those who do not have it to get it. It has a VC with animations, no 2D panel, and its own sound. The passenger waves a map as it flies, the doors open as do the windows on the upper part of the door, and the sunshields lower--all from within the VC only.





This aircraft can be download on http://frenchvfr.free.fr - Download Section - FSX/P3D Aircraft

Have fun if you get it

[DaveKDEN]

You can now download one the best freeware created for FS2004 which is now useable on FSX-SP2/Acceleration Dx10 and Prepar3D v2.

This migration has been done with Fravin agrement. In June 2013 I was contacted by one of two authors who sought a modeler who would have the patience and willingness to make a FSX version of this aircraft. It is with pleasure that I accepted and after 6 months of work here is the first release. Other changes are in progress and version 2.0 should be available by the first half of 2014

This aircraft "a Cessna 150L Aerobat" which have been compared to some paywares, has been migrated on FSX. This a/c has nice animations and is a joy to fly and look at also, as the paint jobs are (visually) some of the best and most refined schemes on Cessna high-winged single-engined.

I strongly advise those who do not have it to get it. It has a VC with animations, no 2D panel, and its own sound. The passenger waves a map as it flies, the doors open as do the windows on the upper part of the door, and the sunshields lower--all from within the VC only.





This aircraft can be download on http://frenchvfr.free.fr - Download Section - FSX/P3D Aircraft

Have fun if you get it

Looks great.
Edit;
Make sure you don't use Chrome's French to English translation as it translates an incorrect user name.

[Roger]

It has interior and exterior mdls so it's native!

[Stan V.]

I find the download okay but then the site asks for my user name and password which I don't have and don't particularly want to get. Is there any way around this?

Stan V.

[Portia911]

Wonderful news, lagaffe

[Rudyjo]

I tried to download this, it says to use "mike" as the user name and "simulation" as the password.
When I put in those words, it says they are not correct.
Can't download it.

[StormILM]

Do not translate the username/password, type them exactly as they are shown in red. I got mine on the first attempt. I remember this model from my FS9 days, very nice! It's a bit dated graphics wise now but I'm going to give it a shot.

[OleBoy]

Thanks for sharing this lagaffe

[lagaffe]

I have translate all the pages in the Download section (http://frenchvfr.free.fr/download.php?lng=en) so if you choose the right language on the banner page (English of course) you can read without problem all the instructions to proceed !

I am French but I speak and read English of course ;-)

@Oleboy: I protect my download with a username and a password because some people use hotlink on my site so I prefer that you erase you last reply.

Didier aka "Lagaffe"

[dandog]

The words are 'micro' and 'simulation'. However, I then get an unconfirmed download of 42.1 MB. If I rename it the .zip file type, I can unzip it and it's a complete file. Tried in Chrome and IE.

[big-mike]

Merci Didier pour cet avion magnifique!
Mike

[alehead]

A warm thank you to all who participated in making this possible. I loved this in FS9 too... A great plane for hopping around OrbX airfields and the like...

A


Andrew Entwistle

[lagaffe]

Hi,

It's not necessary to be registred on French-VFR to download an aircraft or an other model; if you do, it will be very nice of you.
Each download is protected with a username/password which are NOT your username member.

All necessary data are detailed in the few lines joined to the download area: you have just to read theses lines. So don't use "Google Translation" on my site, username and perhaps password will be also translated ... so your problems come from there.
To avoid this problem, I have create my homesite with two langages: French and English and I translate systematically all my download pages in English.

Download howto:
1) On the banner page of French-VFR, click on the English flag (at left top of the page) to switch the language site and then go to the Download area and read the instructions: username and password are colored in red.
2) If you have used wrongs username/password and if your explorer have memorized theses settings, try to use another program like Firefox or reset your security parameters (memorized accounts/password).

@ThinkingmanNeil
I am curious and I have made some research on "Texas Taildragger" ... it's a very nice aircraft but this one is a french Cessna maded by Reims Aviation.
Perhaps in the next version, I will make a "Texas Taildragger" ...

Best regards !

[Anneke]

This is very much appreciatede. Merci beaucoup monsieur!

[racartron]

What a great gift for all us old timers this was my favorite bird in the fs9 days. The good news is all the old liveries port over nicely. All I did was to delete the old prop bmp and add the fsx texture.cfg into each old livery.

I also added my shockwave light setup as one can never have too many lights Here it is for anyone who likes lots of lights

[lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 4, 1.90, 0.00, 1.45, fx_shockwave_vclight,
light.1 = 1, -16.2, 0.00, 3.47, fx_shockwave_beacon ,
light.2 = 4, 1.20, 0.00, 1.00, fx_shockwave_vclight,
light.3 = 3, 0.58, -16.50, 1.80, fx_shockwave_navred_nl,
light.4 = 3, 0.58, 16.60, 1.80, fx_shockwave_navgre_nl,
light.5 = 2, 0.28, -16.50, 1.80, fx_shockwave_strobe_nl,
light.6 = 2, 0.28, 16.60, 1.80, fx_shockwave_strobe_nl_3,
light.7 = 6, 8.10, 0.00, -1.20, fx_shockwave_landing_light_small,
light.8 = 5, 8.10, 0.00, -1.20, fx_shockwave_landing_light_narrow

now, back to the skies

[big-mike]

Roger and Tufun,would you please share your paints with us?
Thank you
Mike

[Paul Anderson]

Great job on conversion!
Just an observation, in Greenhopper's paints the title for FCROW is blank which prevents it and any subsequent paints in aircraft.cfg from showing in aircraft selection menu.

Suggest changing it from:
title=
to:
title=Cessna_150 F-CROW

[doublecool]

Wonderful gift for the start of 2014

Thank you to all envolved

[kiki]

Great job on conversion!
Just an observation, in Greenhopper's paints the title for FCROW is blank which prevents it and any subsequent paints in aircraft.cfg from showing in aircraft selection menu.

Suggest changing it from:
title=
to:
title=Cessna_150 F-CROW

Thank you! I didn´t see that...

Sadly there are not too many non-French repaints available. At least I don´t find them. That metal repaint in Rogers picture would be great and some Canadian, US and UK registers as well.

[Lane Street]

I know this is an "oldy but goody" yet I am curious if the C150L with the fixed ADF was ever, or will ever be, released?

cheers,
Lane

[lagaffe]

Hi,

Yes the ADF will be solved and a version 2.0 is ready to be publish.
I was also developing a little French scenery LAON - LFA what I wanted to released for a friend: it's finish http://frenchvfr.free.fr/download.ph...=652&tconfig=0

So the C 150 v2.0 will be released as soon as possible.

Lagaffe