Manfred's Douglas C-47 Reloaded (Beta) - Page 25
Page 25 of 25 FirstFirst ... 15171819202122232425
Results 601 to 624 of 624

Thread: Manfred's Douglas C-47 Reloaded (Beta)

  1. #601
    Quote Originally Posted by manfredc3 View Post
    Just a question; Is there a chance for a Air Alaska and Buffalo Airways repaint?
    You don't like this?


  2. #602
    Quote Originally Posted by dvj View Post
    Say this is really spectacular. Any chance of high resolution textures for the paint? A bit blurry on my PC when you zoom in and look around. Thx, d
    I dont know why I have this ugly blurry



    in the paint not had it all



    here I resized from 2048 to 4096
    but it will be hard work to adjust all




    counting even I have all those flying in my head
    <img src="http://fsfiles.org/flightsimshotsv2/images/2014/01/31/PlUdI.jpg" border="0" />

  3. #603
    Quote Originally Posted by Hanimichal View Post
    I dont know why I have this ugly blurry



    in the paint not had it all



    here I resized from 2048 to 4096
    but it will be hard work to adjust all




    counting even I have all those flying in my head
    No worries. It's still superb. The golden reflections are stunning.

    d

  4. #604
    Quote Originally Posted by manfredc3 View Post
    Just a question; Is there a chance for a Air Alaska and Buffalo Airways repaint?
    I did an Alaska paint a while ago
    You can find most of my repaints for FSX/P3D in the library here on the outhouse.
    For MFS paints go to flightsim.to

  5. #605
    Quote Originally Posted by JensOle View Post
    Looking very good! Actually it might be even more interesting to make the aircraft the Dakota of Norway has based this scheme on which is C-47A "Z" of No 20 (Norwegian) Sqn as it looked from may 1945-spring 1946.
    http://dakotanorway.no/test/wp-conte...5-08_viaST.jpg
    That's true, but photos of the Dakota Norway aircraft are much easier to find

  6. #606
    Quote Originally Posted by jankees View Post
    I did an Alaska paint a while ago
    Jankees- any pointer where.... Can't seem to locate

    Carl

  7. #607
    Senior Administrator huub vink's Avatar
    Join Date
    Jun 2005
    Location
    Noordwijk, The Netherlands (EHVB)
    Age
    65
    Posts
    10,268
    Quote Originally Posted by cavaricooper View Post
    Jankees- any pointer where.... Can't seem to locate

    Carl
    When they are done by JanKees I'm sure you can find them here.....

    http://aussiex.org/forum/index.php?a...nloads&mid=750

    Good luck,
    Huub

  8. #608
    Quote Originally Posted by cavaricooper View Post
    Jankees- any pointer where.... Can't seem to locate

    Carl
    Believe OZx downloads is where I got it - echo of Huub.

  9. #609
    Many thanks! Found it at Oz.....brilliant!

    Click image for larger version. 

Name:	Alaska2.jpg 
Views:	5 
Size:	47.7 KB 
ID:	4340

    Carl
    Last edited by cavaricooper; February 16th, 2014 at 05:51.

  10. #610
    Quote Originally Posted by Hanimichal View Post
    You don't like this?
    At least I missed this so far - thanks very much, was waiting for that one!

  11. #611
    What a great plane! I am using "Real Engine 1.4" with it to get accusim type consequences.

  12. #612
    Any chance for a repaint of the Vera Lynn flown by Ruskin Air Services known from the 1980s tv series "Airlines"?

    It would be highly appreciated.
    One day without laughter, is one day without living.
    One day without Flight Simming, is one day lost living.

  13. #613
    Not sure whether this is the right thread for a minor bug report:



    In DX10 mode (with Steve's Fixer) I get these two tiny graphic glitches - on an otherwise problem-free (and fantastic) aircraft.

    Looking at other people's screenshots the glitches don't appear in DX9 (I'm not likely to flip back to DX9 even for a minute!).

    I get it on all MJ C-47/DC-3 models, but if anyone wants to try it on the same livery/repaint, it's here: http://aussiex.org/forum/index.php?/...k-nz-warbirds/

    I'd be interested to know if it happens in DX9 (I suspect not) ... Check Shoprite Specials and Spar Specials. and whether anyone could confirm that it happens for them in DX10 mode.

    Looking forward to that VC!!!!

    Adam.
    XP11.50 | MSFS 2020
    Intel Core i7 2600K @ 3.40-4.69GHz | 8GB DDR3 | nVidia RTX2060 8GB | Win10 2004 64-bit 24Gb RAM



  14. #614
    Hi Adam,
    qualified response: Yes the shadowed triangles on the inlet are artefacts specific to dx10/11. The V2 version now accessible at Flightsim.com has the necessary corrections.

    The other, squarish "shade" is really a hole or outlet, as on the real thing, wouldn't want to correct that.

    In the meantime I have converted to dx10 myself and noticed that the same kind of dx10 artefact is also spoiling the spinners. If you can wait a bit for me to recompile the models you can get a quick upload link later here. Watch this page.

    Cheers,
    Manfred

  15. #615
    Quote Originally Posted by mjahn View Post
    Hi Adam,
    qualified response: Yes the shadowed triangles on the inlet are artefacts specific to dx10/11. The V2 version now accessible at Flightsim.com has the necessary corrections.

    The other, squarish "shade" is really a hole or outlet, as on the real thing, wouldn't want to correct that.

    In the meantime I have converted to dx10 myself and noticed that the same kind of dx10 artefact is also spoiling the spinners. If you can wait a bit for me to recompile the models you can get a quick upload link later here. Watch this page.
    Thanks, Manfred! I'll grab the updated V2 anyway ...

    If you look closely in the dark area, that rear outlet has two similar looking triangles. Not exactly earth-shattering, but if you're re-working anything you might want to check if that's how it's meant to be.

    Great news about you going to DX10. I totally love it - and Steve's Fixer has really given my FSX a new lease of life! But that's another thread LOL!

    Incredible work, Manfred ... it's got to be one of the best freeware aircraft out there - and certainly the best DC-3 of all time (freeware or payware).

    Adam.

    EDIT: Is there a new/different filename for the V2 on Flightsim.com? The only one I see is the October 2013 version (douglas_c-47_v2.zip) ... which is the one I've been working with.
    XP11.50 | MSFS 2020
    Intel Core i7 2600K @ 3.40-4.69GHz | 8GB DDR3 | nVidia RTX2060 8GB | Win10 2004 64-bit 24Gb RAM



  16. #616
    Ok, didn't know these things might be lurking in the shadows as well. I'll have a look.

    (The cause of the issue is, Dx9 doesn't care if you map a poly sideways with zero area, while dx10 and 11 do. I am now paying better attention to mapping more carefully.)

  17. #617
    Here you go Adam:

    https://dl.dropboxusercontent.com/u/...aksC-47_V2.zip

    Didn't actually see the distortion in the outlets, but mapped them anew anyway (they did have flat polys). If you notice anything else please let me know. We want her to be perfect for the new VVC.

    I believe the files at Flightsim had some of the tweaks, but these files here have more of them.

  18. #618
    Quote Originally Posted by mjahn View Post
    Here you go Adam:

    https://dl.dropboxusercontent.com/u/...aksC-47_V2.zip

    Didn't actually see the distortion in the outlets, but mapped them anew anyway (they did have flat polys). If you notice anything else please let me know. We want her to be perfect for the new VVC.

    I believe the files at Flightsim had some of the tweaks, but these files here have more of them.
    Absolutely perfect, Manfred! . The outlets are a little confusing, as they often get a slanting shadow that looks just like one of those rogue polys. I panned all around the new ones and they appear to behave as they should ... well done!

    No need for a confirmation screenshot - they're just as they should be.

    I may be due to do another repaint or two - and that's the time when I spend a LOT of time staring at rivets etc. Something may come up when I get around to them. The RNZAF repaint I did was totally DX10 from start to finish and I really couldn't spot anything else at the time. Whatever it was about the spinner I don't know (unless that was one of the things already fixed in the Flightsim.Com V2)!

    It's such a gorgeous aircraft and your model gave me many hours of pleasure looking at it as I worked on the repaint. You won't believe how many times I now jump into that C-47 and just *stare* at it (outside view). It handles beautifully and sounds just great. The new VC will truly be the icing on the cake!

    I've had a flight in the NZ Warbirds DC-3 - and see it very often at displays here. We're really lucky to have one that spends so much time in the air - it's a joy to see.

    Adam.

    P.S. I really should edit my previous post. This isn't *one of* the best freeware DFSX aircraft .. even without the new VC, it's *THE best*. What was I thinking? LOL!
    XP11.50 | MSFS 2020
    Intel Core i7 2600K @ 3.40-4.69GHz | 8GB DDR3 | nVidia RTX2060 8GB | Win10 2004 64-bit 24Gb RAM



  19. #619
    Many thanks, Adam, much appreciated. As you know, the members of this forum have been incredibly supportive and helpful. Keep those paints coming!

  20. #620
    Cheers again for the hard work Manfred!

    On the subject of paints, if anyone wants one done, feel free to drop me a line, am embarking on an RTW trip and I'm gonna needs lots of liveries by the time I'm done!

    Sent from my HTC One X+ using Tapatalk

  21. #621
    (With advance apologies for the old post resurrection).... whilst flying the Jahn C-47 v2 in P3d V 2.5 (latest update) I get pronounced flickering where the left window meets the "A" pillar. ONLY THERE- no where else. Opening and closing the window does not remove the flickering...it is in the forward window channel - where the window slides forward to shut. It is MUCH worse in the Alaska Airlines livery, just a slight flickering in the RAE variant.....Any thoughts?

    Ta- Carl

  22. #622
    Carl, can you try the Patch linked in a few posts up (Adam) and report if the artifact persists after using the new models. Thanks,
    Manfred

  23. #623
    Quote Originally Posted by mjahn View Post
    Carl, can you try the Patch linked in a few posts up (Adam) and report if the artifact persists after using the new models. Thanks,
    Manfred
    Wow- I did not expect a reply directly from the Oracle at Delphi . Will apply the patch this afternoon and report back. Thank you so much Manfred- I am but one of the countless masses that appreciate your work.

    ADDITION- Downloaded and installed- presto- no flickering! Many thanks Manfred- she has given me hours of pleasure, and is due for an upgrade soon... making a lovely old lady even better!

    Best- C
    Last edited by cavaricooper; May 15th, 2015 at 11:41.

  24. #624
    Quote Originally Posted by flyinggoldfish View Post
    Cheers again for the hard work Manfred!

    On the subject of paints, if anyone wants one done, feel free to drop me a line, am embarking on an RTW trip and I'm gonna needs lots of liveries by the time I'm done!
    Since you are asking, let me repeat an earlier request:

    Any chance for a repaint of the Vera Lynn flown by Ruskin Air Services known from the 1980s tv series "Airlines"?

    It would be highly appreciated.
    One day without laughter, is one day without living.
    One day without Flight Simming, is one day lost living.

Similar Threads

  1. Manfred Jahn Douglas DC-3 / C117D Videos
    By Cirrus N210MS in forum FSX General Discussion
    Replies: 0
    Last Post: November 3rd, 2013, 22:05
  2. Manfred Jahns C-47 Reloaded - texture query
    By Geomitrak in forum FSX General Discussion
    Replies: 7
    Last Post: October 30th, 2013, 05:35
  3. Transcend II Reloaded
    By gigabyte in forum X3 Terran Conflict
    Replies: 37
    Last Post: July 18th, 2011, 15:17
  4. Douglas Dolphin from Golden Age Simulations...now in beta
    By Roger in forum FSX General Discussion
    Replies: 10
    Last Post: December 12th, 2010, 15:15
  5. HUD-ETO , RELOADED ETO ,,,, how do i get smaller hud ...thanks to all
    By loverboy1 in forum CFS3 General Discussion
    Replies: 1
    Last Post: June 24th, 2010, 08:48

Members who have read this thread: 157

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •