New Vought 156-F repaints by FdE Bressy!

[fde_bressy]

A new entry has been added to Add-Ons Library, category CFS 2 Skins - Other

Description: V-156F-3 - French Navy texture for Paul Clawson SB2U Vindicator rebuilt by Allen with dive brakes. This is the export version for the French Navy, 40 built.

Most of them were destroyed by the Luftwaffe during hopeless fights in Norfh of France.

The bomb support was removed and supposed to be replaced by French models, but no plane was equipped with those devices. The machine guns were replaced by French Darne MGs.

F. de Bressy

To check it out, rate it or add comments, visit AAF-Vought 156-F v1.zip
The comments you make there will appear in the posts below.

[fde_bressy]

A new entry has been added to Add-Ons Library, category CFS 2 Skins - British

Description: V-156B-1 - Fleet Air Arm texture for Paul Clawson SB2U Vindicator rebuilt by Allen.

Export version similar to the SB2U-3 and powered by a 750hp R-1535-SB4-G engine for the British Royal Navy. It was designated Chesapeake Mk. I 50 of these aircraft were built.

I attached my version of DP file with an improved GUNS section.

F. de Bressy

To check it out, rate it or add comments, visit FAA-Vought Cheasapeake Mk. I.zip
The comments you make there will appear in the posts below.

[fde_bressy]

A new entry has been added to Add-Ons Library, category CFS 2 Skins - American

Description: USN-Vought SB2U-1 #1 - US Navy texture for Paul Clawson SB2U Vindicator rebuilt by Allen.

Air Group commander, USS Ranger, 1940 - SB2U-1

Initial production version powered by a 825hp R-1535-96 engine, 54 built.

N° 0726 to 0779 Vought SB2U-1 Vindicator

I attached my version of DP file with improved GUNS section

F. de Bressy

To check it out, rate it or add comments, visit USN-Vought SB2U-1 #1.zip
The comments you make there will appear in the posts below.

[fde_bressy]

A new entry has been added to Add-Ons Library, category CFS 2 Skins - American

Description: US Navy texture for Paul Clawson SB2U Vindicator rebuilt by Allen.

CV-3 USS Saratoga 1939 - SB2U-1

Initial production version powered by a 825hp R-1535-96 engine, 54 built.

N° 0726 to 0779 Vought SB2U-1 Vindicator

I attached my version of DP file with improved GUNS section

F. de Bressy

To check it out, rate it or add comments, visit USN-Vought SB2U-1 #2.zip
The comments you make there will appear in the posts below.

[fde_bressy]

A new entry has been added to Add-Ons Library, category CFS 2 Skins - American

Description: US Navy texture for Paul Clawson SB2U Vindicator rebuilt by Allen.

CV-7 USS Wasp 1940 - SB2U-2

Same as SB2U-1 but with minor equipment changed, 58 built.

N° 1326 to 1383 Vought SB2U-2 Vindicator

I attached my version of DP file with improved GUNS section

F. de Bressy

To check it out, rate it or add comments, visit USN-Vought SB2U-2 #1.zip
The comments you make there will appear in the posts below.

[fde_bressy]

A new entry has been added to Add-Ons Library, category CFS 2 Skins - American

Description: US Navy texture for Paul Clawson SB2U Vindicator rebuilt by Allen

CV-4 USS Wasp 1940 - SB2U-2

Same as SB2U-1 but with minor equipment changed, 58 built.

N° 1326 to 1383 Vought SB2U-2 Vindicator

I attached my version of DP file with improved GUNS section

F. de Bressy

To check it out, rate it or add comments, visit USN-Vought SB2U-2 #2.zip
The comments you make there will appear in the posts below.

[Rami]

Fde Bressy,

Your taste for the obscure and your skill bringing these models to life never ceases to amaze. Well done! :salute:

[gaucho_59]

A new entry has been added to Add-Ons Library, category CFS 2 Skins - Other

Description: V-156F-3 - French Navy texture for Paul Clawson SB2U Vindicator rebuilt by Allen with dive brakes. This is the export version for the French Navy, 40 built.

Most of them were destroyed by the Luftwaffe during hopeless fights in Norfh of France.

The bomb support was removed and supposed to be replaced by French models, but no plane was equipped with those devices. The machine guns were replaced by French Darne MGs.

F. de Bressy

To check it out, rate it or add comments, visit AAF-Vought 156-F v1.zip
The comments you make there will appear in the posts below.

Where is the model (complete aircraft) with dive brakes... could not find it in CFS2 addons... just the your skins...

[Allen]

gaucho_59

Le V-156-F est dans le CFS 2 Add-Ons bibliothèque. Regardez sous CFS 2 avions - France

V-156-F
http://www.sim-outhouse.com/sohforum...1&linkid=16143


The SB2U-1 and SB2U-3 are found in CFS 2 Aircraft Add-Ons under CFS 2 Aircraft - American.

SB2U-1 (Also the very close to the U.S. SB2U-2)
http://www.sim-outhouse.com/sohforum...2&linkid=15673

SB2U-3 (Also the very close to the British V-156-B)
http://www.sim-outhouse.com/sohforum...2&linkid=15654

FdE Bressy

Thanks for doing all of the skins!

[fde_bressy]

Hallo Allen,

Thanks for the compliments, but nothing could have been possible without you renewal work on the model.

What comes next from you?

Congrats for your French...

Regards to all of you.

[Allen]

Whats next? Don't know. In the last 30 days did the rebuild of the SB2U/V-156 a rebuild of the stock A6M5 to be a A6M5c and a 95%+ scrach made Crimson Skies Bloodhawk is almost done. I have to do the last bit of ingame testing for the Bloodhawk than it is done as well. I put up 2 screen shot of the Bloodhawk in the "Screenshots" thread.

[Rami]

Allen,

If I might make a request for a model to be rebuilt, how would you feel about a multi-lod Martin Baltimore? There really is only one model out there that works, and it could DESPERATELY use a rebuild. If you could be persuaded to work on this, I would be extraordinarily grateful to you!

Here is the model:

CFS 2 Martin Baltimore Mk V. (Category: CFS2 > Aircraft)
3.03Mb (733 downloads)
CFS 2 Martin Baltimore Mk V. Made with Gmax, Multilod, breakeable. Textures by ERAFFITI, MDL, Dp Y Air files by Silvia Borja. 3.1MB

Here is the link: http://simviation.com/1/download-fil...p&fileId=32441

[misson]

A new entry has been added to Add-Ons Library, category CFS 2 Skins - American

Description: US Navy texture for Paul Clawson SB2U Vindicator rebuilt by Allen

CV-4 USS Wasp 1940 - SB2U-2

Same as SB2U-1 but with minor equipment changed, 58 built.

N° 1326 to 1383 Vought SB2U-2 Vindicator

I attached my version of DP file with improved GUNS section

F. de Bressy

To check it out, rate it or add comments, visit USN-Vought SB2U-2 #2.zip
The comments you make there will appear in the posts below.

Francois! I really , really like this repaint! Thank u for share it!
Regards
Mario

[Seagull V]

Excellent work everyone involved for bringing another golden oldie back to life - keep it going !!!!!!!

Whats next? Don't know. In the last 30 days did the rebuild of the SB2U/V-156 a rebuild of the stock A6M5 to be a A6M5c and a 95%+ scrach made Crimson Skies Bloodhawk is almost done. I have to do the last bit of ingame testing for the Bloodhawk than it is done as well. I put up 2 screen shot of the Bloodhawk in the "Screenshots" thread.

Allen,
If you are after more GMAX projects, there are a number of projects that have been released at Simviation that you could have a sticky beak at.
http://simviation.com/1/browse-Desig...ce+Files-103-0

Look through and you will see both GMAX & FSDS orphans looking for a good home, plenty of opportunities for Crimson Skies extension work as well.

Regards, Seagull V

[gaucho_59]

Excellent work everyone involved for bringing another golden oldie back to life - keep it going !!!!!!!



Allen,
If you are after more GMAX projects, there are a number of projects that have been released at Simviation that you could have a sticky beak at.
http://simviation.com/1/browse-Desig...ce+Files-103-0

Look through and you will see both GMAX & FSDS orphans looking for a good home, plenty of opportunities for Crimson Skies extension work as well.

Regards, Seagull V

I just finished a profile based on the pic that accompanied the download...

Ooops... jumped the gun and forgot to finish the propeller...

[Allen]

Seagull V

I remember that from way back when before FS2002 and gmax.... I look over them maybe something will look good.

[kelticheart]

Allen,

If I might make a request for a model to be rebuilt, how would you feel about a multi-lod Martin Baltimore? There really is only one model out there that works, and it could DESPERATELY use a rebuild. If you could be persuaded to work on this, I would be extraordinarily grateful to you!

Here is the model:

CFS 2 Martin Baltimore Mk V. (Category: CFS2 > Aircraft)
3.03Mb (733 downloads)
CFS 2 Martin Baltimore Mk V. Made with Gmax, Multilod, breakeable. Textures by ERAFFITI, MDL, Dp Y Air files by Silvia Borja. 3.1MB

Here is the link: http://simviation.com/1/download-fil...p&fileId=32441

HEAR! HEAR! YES!

The first mod that comes to my mind for this Baltimore is round engine cowls instead of ovals. I'll take it out for a spin today to see what else could be done.


FDE-Bressy

Splendid repaints! Thank you!

"Old combat flight simulators do not die, they run faster!" (from a bumper sticker I saw a long time ago in L.I., N.Y., where it read "Old cars do not die....")

Cheers!
KH :ernae: