FlightBeam Studios KPHX released
Results 1 to 12 of 12

Thread: FlightBeam Studios KPHX released

  1. #1

    FlightBeam Studios KPHX released

    Just a heads up, FlightBeam KPHX Phoenix Sky Harbor has been released. I have not bought it yet, but I am downloading the trial version now:salute:

    http://www.flightbeam.net/kphx.html

    i7-4770K 4.4 Ghz - ASUS z87 PRO - Corsair H100i - 16 gig Kingston Beast DDR3 2166 Mhz - Gainward GTX 1070 GS GLH - CX 750M PSU - CoolerMaster HAF X case

  2. #2
    Just tried it out. It really looks good, I do however get a small hit in fps (my systems is low-end, so I did expect that). A few quick shots from the trial:








    i7-4770K 4.4 Ghz - ASUS z87 PRO - Corsair H100i - 16 gig Kingston Beast DDR3 2166 Mhz - Gainward GTX 1070 GS GLH - CX 750M PSU - CoolerMaster HAF X case

  3. #3
    I bought it and there are a few flaws. The P3D installer failed with an error that SP2 or Acceleration were required. At least one of the bridges looks like it's missing the abutments at each end, so it stops too short. Some large areas of the default autogen are excluded or missing at one end of the airport. The rental car garage (one of my big projects) at the west end is not included <gasp>. After entering the registration number, the scenery is still in trial mode and the models vanish after a few minutes.

  4. #4
    Quote Originally Posted by kjb View Post
    <gasp> After entering the registration number, the scenery is still in trial mode and the models vanish after a few minutes.
    This is an issue with all sceneries that use this addon manager system. You just need to restart your PC after installation.

    </gasp>
    FAA ZMP
    PPL ASEL

    | Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | EVGA GTX1080 Ti | 32GB 5600 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X |

  5. #5
    That didn't work. I tried uninstalling and installing again with antivirus off, then restarting my computer. I'm still stuck in trial mode. I'll keep an eye on their support forums.

  6. #6
    SOH-CM-2014
    Join Date
    Jul 2005
    Location
    The land where dust is manufactured and people are high temp tested!
    Age
    62
    Posts
    12,330
    Sky Harbour international... What a nightmare to drive through in a car to pick someone up. :S


    I remember when it was still Terminal one and two, single level buildings, a few gates. Then came Terminal 3. Now, I think there are 6 Terminals..... ack!
    Humble Poly bender and warrior of Vertices


    Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
    Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write

  7. #7
    Got it. I dug around and found the manual. I wasn't selecting the publisher and product before entering the serial number.

    Bill, my company did a lot of that work. We did the additions to terminal 4, the rental car garage, the SkyTrain structure, etc. We also did Phoenix City Hall and the Coyotes arena (don't remember what they're calling it now).

  8. #8
    At least you guys purchased it!....It rejected 2 of my cards that I know are good???

    Well...Anybody else gettin' this?






    CODY

  9. #9
    Pearl Harbor Project developer
    Join Date
    Jun 2005
    Location
    The Big D .. Dallas
    Age
    56
    Posts
    2,426
    Quote Originally Posted by Lionheart View Post
    Sky Harbour international... What a nightmare to drive through in a car to pick someone up. :S


    I remember when it was still Terminal one and two, single level buildings, a few gates. Then came Terminal 3. Now, I think there are 6 Terminals..... ack!
    LOL! Me and you both brother.I spent a lot of time on the Northside overat the GA side...Dad took me a lot down there when he was flying and giving lessons in the mid 70s...great cafe there once.....breakfast and model planes...filled a boy's dreams.
    crashAZ- Virtual Navy
    [SIGPIC]http://www.sim-outhouse.net/images/rtwr2013/rtwr2013_sm.png[/SIGPIC]

  10. #10
    Quote Originally Posted by CODY View Post
    At least you guys purchased it!....It rejected 2 of my cards that I know are good???

    Well...Anybody else gettin' this?


    CODY
    No, but do you have any shader mods installed? Also list your system and video settings.
    FAA ZMP
    PPL ASEL

    | Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | EVGA GTX1080 Ti | 32GB 5600 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X |

  11. #11
    Quote Originally Posted by ryanbatc View Post
    No, but do you have any shader mods installed? Also list your system and video settings.
    Posted at their forum...turns out it doesn't like DX10.

    CODY

  12. #12
    SOH-CM-2024 icycle's Avatar
    Join Date
    Nov 2007
    Location
    When not traveling - I'm home!
    Age
    61
    Posts
    167
    Also, from their forum.

    Currently not compatible with Ultimate Terrain X - USA.

    Bummer. Hope it gets addressed soon.

    Bill

Members who have read this thread: 56

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •