Its late here and I cant remember how to or if its possible to add a second gauge to a 2d window
The problem is I would like the existing gauge on the left and the new gauge on the right without creating a new window as already the 2d windows already go up window.13
I would do one of two methos.
1) adjusting some gauges 1 and 2 to be a bit smaller.
2) keep all old size.
[Window05]
Background_color=16,16,16
size_mm=855,930 //this the the actual max window size the gauges make up
window_size_ratio=1.000
position=7
visible=0
ident=5004
window_size= 0.500, 0.654 //this wil set the window size that will be displayed.
window_pos= 0.010, 0.330
gauge01=XXXX(removed in case someone gets upset for posting) 0,0,330,410
gauge00=XXXX(removed in case someone gets upset for posting) 0,410,330,150
gauge02=WXR!wr_display, 481,32,364,279 gauge03=Captain_Sim.r001.P04!P04_radar, 411,0,525,386
I just made the gauge 1 and 2 a bit smaller to make space.
the alternative is to keep the original gauge settings then it will be something like
[Window05]
Background_color=16,16,16
size_mm=1075,930 // was 550 and adding another gauge with width of 525 will increase to 1075, the new gauge do not go past the original height so that stays as is.
window_size_ratio=1.000
position=7
visible=0
ident=5004
window_size= 0.700, 0.654 //again this is the display size
window_pos= 0.010, 0.330
gauge00=XXXX(removed in case someone gets upset for posting) 0,680,550,251
gauge01=XXXX(removed in case someone gets upset for posting) 0,0,549,680 gauge02=WXR!wr_display, 581,32,364,279 gauge03=Captain_Sim.r001.P04!P04_radar, 551,0,525,386
Bookmarks