Prepar3D Version 1.4 is ready for download. Just accessed my account and found the three part download. Total download over 9 GB. Getting started with the 7-8 hour process.
Prepar3D Version 1.4 is ready for download. Just accessed my account and found the three part download. Total download over 9 GB. Getting started with the 7-8 hour process.
Regards, Tom Stovall KRDD
Nice!
Off to start my download...
Thanks for the heads up, Stovall
Bill
Humble Poly bender and warrior of Vertices
Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write
I have one 3.99 GB chunk downloaded and the second 3.99 GB chunk started.
I see an installation some time tomorrow.
VCN-1
First pack of three downloaded. Second one timed out 3X so far. About 50% downloaded.
Bill
Humble Poly bender and warrior of Vertices
Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write
been running it a hour now but cant find your plane unless it replaced their stock moony
Shane,
You have a fast download service!
Look under Mooney, for the 'Acclaim' model. The original is the Bravo.
I hope its there. :S
Just finished downloading package 2 of 3. 2 Gigs to go.
Humble Poly bender and warrior of Vertices
Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write
At the rate that P3D downloaded for me originally I see an install date of about Friday
Cheers
Pat
"Some people might say that freedom is being alone in the bush with the only sounds being the murmurs from the birds ... but I believe freedom is at 5000 feet with no other sound than the engine roaring."- William Hutchison, a young man taken from us far too young (16).
ugggh!
Do you have a place near by that has high speed internet such as a public library with a computer department, local college with computer department, or a business center (like Kinkos) that can download things for you and burn them to CD's. That is a good alternative.
Bill
Humble Poly bender and warrior of Vertices
Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write
yes and its there I have a new fav aircraft makes the defualt one look like it was made in one day on a buget
and yes fast download here broadband with our cable company took me 2.5 hours to download the whole thing
Awesome....
Just finished downloading. Backing up the folders to an aux folder.
WinXP wouldnt let me rename the P3 folder.
For those that havent done this yet, the instructions for the Installer state you must completely and totally remove the Prepar system, everything including the saved flights folders in the My Documents section. (This is per the PDF file). Dang... I kind of wanted to keep some flights. Maybe quite a few things are changed...
Bill
Humble Poly bender and warrior of Vertices
Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write
This better be worth all the backing up crap I have to do to upgrade! Can't say I'm very happy right now. I want to fly NOT download, backup, install and then get the game tuned-up again, so then I can go flying.:isadizzy:
If government was the answer, it was a stupid question!
I'm feeling your pain Mud . Not looking forward to all the back-up and reloading . Just wondering if the dll with all the specific entries like UTX , ORBX sceneries , etc can just be switched out from 1.3 to the 1.4 version . I'll have to comb the P3D forum and find out . I'm almost to the point of completely dropping FSX . Got a ton of AC and sceneries in the older 1.3 version . I'm sure there is a few with special entries that might be a P.I.A .
Your going to enjoy P3D 1.4 for sure.
Rich
AMD FX 8-Core Black 4.2Ghz, 8G Ram 2TB HD, W8.1 pending W10, ATI R5 2G X2 Crossfire
http://www.canadianarcticfse.com/
Smart thinking Rich.
Backing up also... Tons and tons...
I love this sim though. Once its all loaded and running, it will be good again.
Humble Poly bender and warrior of Vertices
Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write
Well..........got the "old" deleted and the "new" installed.
The two new aircraft are the only thing "new" that I've discovered so far and have had a hell of a time getting them off the ground.......
must be a secret switch somewhere in the cockpits.......
Now to all the add-ons I've collected........at least I know the ones that work ok.
Life isn't about waiting for the storm to pass....
It's about learning
to dance in the rain.
10:30 PM, running.
Loved the Iris, had a rough time getting off the ground also.
I wonder if they are maxed out on payload for the flights? The Mooney Acclaim should take off swiftly.
The menu screens that used to take 10 seconds to boot up now are up and gone in a flash. Nice.....!
Humble Poly bender and warrior of Vertices
Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write
Bill, was the Dynamic in 1.3? I may have missed it. It is in 1.4.
Dld just completed (rather quick )
Install next !
Anxious to start flying .... :salute:
Italo
installing now.. this could be interesting.. whats everyones opinion of it so far???
very nice trying to tweek it up but having some small issues with black textures at a large airport
Humble Poly bender and warrior of Vertices
Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write
Humble Poly bender and warrior of Vertices
Alienware Console i7 3770 CPU 3.40 GHz / 16 Gigs of RAM / GTX660 GC w/2 Gigs of VRAM / Windows 7 64 Ultimate
Running 3X Samsung 840 SSD HD's, 200 Gig each, 500/500 Read/Write
Interesting...I bought it, but hadn't reinstalled it since updating. Somehow it made its way back in 1.4, even though I deleted everything per the installation instructions. Oh well, saves me one thing I won't have to install now
They still have not addressed some fundamentals. It still boots up into a flight, no menu screen. Wx is the same albeit I use an external program for Wx, ATC pop up still solid. And frustratinglt the ALT Return to switch from windowed into full screen still does not work. Oh and it does not recognise SPAD for my Saitek panels.
I cannot see me using P3D as my main sim, so its back to trusty old FSX.
Intel i5-10600K 4.10 GHz 12 Core CPU
Asus ROG Strix Z590-E Gaming LGA1200 Z590-E Motherboard
Corsair Vengeance LPX 32GB (4 x 8GB) DDR4-3200 Memory
Water Cooler - CORSAIR iCUE H100i RGB PRO XT
Corsair 850W PSU
MSI RX580 Radeon Armor 8Gb
Windows 10 Home Premium 64
3 x 21" Acer LED screens
I didnt get as far as you got Naismith.. I id a "clean" install ( uninstalled the old version from the programs control ) and, i dont have either Iris's or Lionhearts aircraft to select in the menu.. its like WTF?? I've got a dev license. does this mean i dont get the candy?? I'm confused and upset..
Pam
Bookmarks