I bought the new Saitek Combat Rudder Pedals and have a severe problem: after braking, the brakes will not release. When pressing a brake I get the usual message ‘differential brake) in the left corner of the monitor, but when I release the brake the message ‘brakes’ remains. The same problem occurs in CGF3.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" /><o></o>
So fat I have done the following:<o></o>
1: Unchecked the ‘reverse’ button in the Options/Controls/Axis assignment tab.<o></o>
2: Checked the Perform action when released’ under the same tab.<o></o>
3: Disconnected the pedals both inside and outside FSX, with and without restarting the computer.<o></o>
4: Plugged the pedals into a different UB port (the port I originally used was used in the past for my CH Pro Pedals so I thought that some CH USB control software might still be resident, interfering with the new pedals).<o></o>
5: I even had a look at the manual…<o></o>
<o></o>
Nothing solved the problem and I am out of my wits. Is there perhaps someone on his forum who knows a solution? I looked around on the Internet but could not find anything. May it indeed be a problem with software from previous pedal configurations?<o></o>
<o></o>
And it is getting worse….<o></o>
<o></o>
Now my brand-new Thrustmaster Warthog throttle is not recognized anymore. The five LEDs in the back are on, but the rest of the LEDs are off. The calibration window in the Control Panel and the TARGET software only recognize the joystick. I tried pulling the USB plug out and in again, and re-installing the software, but nothing helps. I have fond memories of my trusty old Cougar…<o></o>
<o></o>
Is there anyone who has had the same issues and found solutions?<o></o>
<o></o>
Thanks!<o></o>
Bookmarks