lITTLE hELP

[rmalone]

Greetings all,
Am working on this panel-have removed all things that point to vc and still have a wall at left front and right front-(see attachments) I really like this cockpit, but this is driving me batty- any help or ideas will be greately appreciated. Thanks in advance
RM

[PJMack]

Greetings all,
Am working on this panel-have removed all things that point to vc and still have a wall at left front and right front-(see attachments) I really like this cockpit, but this is driving me batty- any help or ideas will be greately appreciated. Thanks in advance
RM

RM,

One of the VC that you removed needs to be painted with a screen shot. Its probably called main panel vc. When you are looking streight ahead you are looking at the 2d panel. When you are turning you are in 3d. Let me know if I can help. I just did this to another aircraft.

PJ

[rmalone]

Hey Thanks a bunch- will work on it-Appreciated the offer- will try it on my own(its a learning thing you know), Will let you know how it goes-may need the help he he
RM

[bearcat241]

Roy, i'm curious...what do you mean by "removed all things that point to the VC"? What exactly did you remove from the panel.cfg -- the entire VC section(s)? If so, you should restore everything again then remove only the gauges. If you removed the entire VC section(s), you inadvertently also removed the panel texture call that "paints" the vertical plane of the vc panel (example below in red):

[Vcockpit02]
Background_color=0,0,0
size_mm=512,512
visible=1
pixel_size=1024,1024
texture=$AH_P47_R1

gauge00=p47d!Attitude, 80,197,99,106
gauge01=p47d!Boost_Pressure, 83,313,69,69
gauge02=p47d!Engine_Temperature, 208,178,44,44
gauge03=p47d!Oil_Pressure, 201,234,73,72
gauge04=p47d!Tachometer, 161,312,69,69
gauge05=f86_compass, -9,303,93,97
gauge06=p47d!Fuel, 241,311,69,69
gauge07=F4u1a_Corsair!Hydraulic_Pressure_Warning, 50,426,24,23
gauge08=F4u1a_Corsair!Carb_Heat, 51,398,24,23
gauge09=F86_amps, -6,390,53,50
gauge10=b26!RLC_Hydraulic_Gauge, 239,385,69,69
gauge11=b26!RLC_Fuel_Pressure, 86,386,69,69

You should leave the entire top section (in bold print) and only delete the gauges from gauge00 down. Then you can replace them with your preferred gauges, if that's your intent. When modding an exisitng FS vc panel in a convert, as a rule i never delete the original FS vc gauges until i've positioned the CFS2 replacements over them. I use the locations of the existng gauges as a guide first for locating my replacements, then delete them with the panel edit program afterwards. Saves a LOT of work...

[rmalone]

Hey bearcat,
Yup I did just what you said took it all out-Will replace everything but gauges-Both you guys A big THANKS- live and learn i say. Thanks again to both you guys
RM

[rmalone]

greetings,
good advice alround Thanks guys appreciate it

rm