Messerscmitt Bf 109E-3's released be Team Daedalus

[Team Daedalus]

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - German

Description: Messerschmitt Bf 109E-3
by Design Team Daedalus


Unit: 1./JG 26 1940 Caffiers, France
Pilot: Oblt. Walter Blume


To improve the performance of the Bf 109E, the last two real prototypes (V16 and V17) were constructed. These received some structural improvements and more powerful armament. Both were the basis of the Bf 109 E-3 version. The E-3 was armed with the two MG 17s above the engine and one MG FF cannon in each wing. Some units began recieving the E-3 by September 1939. A total of 1,276 E-3 were built, including 83 E-3a export versions.


There were many small differences between indivual E-3s because the E-3 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc.


So each model we have created has its own unique features. This aircraft was modified with flat plate pilot head armor.


Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

To check it out, rate it or add comments, visit Messerschmitt Bf 109E-3 1./JG 26
The comments you make there will appear in the posts below.

[Team Daedalus]

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - German

Description: Messerschmitt Bf 109E-3
by Design Team Daedalus


Unit: 2./JG 2 1940 Caffiers, France
Pilot: Oblt. Walter Blume


To improve the performance of the Bf 109E, the last two real prototypes (V16 and V17) were constructed. These received some structural improvements and more powerful armament. Both were the basis of the Bf 109 E-3 version. The E-3 was armed with the two MG 17s above the engine and one MG FF cannon in each wing. Some units began receiving the E-3 by September 1939. A total of 1,276 E-3 were built, including 83 E-3a export versions.


There were many small differences between individual E-3s because the E-3 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc.


So each model we have created has its own unique features. This aircraft was modified with flat plate pilot head armor.


Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

To check it out, rate it or add comments, visit Messerschmitt Bf 109E-3 2./JG 2
The comments you make there will appear in the posts below.

[Team Daedalus]

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - German

Description: Messerschmitt Bf 109E-3
by Design Team Daedalus


Unit: 3./JG 52 May 30,1940 France
Pilot: Uffz. Kurt Wolff


To improve the performance of the Bf 109E, the last two real prototypes (V16 and V17) were constructed. These received some structural improvements and more powerful armament. Both were the basis of the Bf 109 E-3 version. The E-3 was armed with the two MG 17s above the engine and one MG FF cannon in each wing. Some units began receiving the E-3 by September 1939. A total of 1,276 E-3 were built, including 83 E-3a export versions.


There were many small differences between individual E-3s because the E-3 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc.


So each model we have created has its own unique features. This aircraft was modified with flat and curved top plate pilot head armor and a rear view mirror mounted on top of of the windscreen.


Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

To check it out, rate it or add comments, visit Messerschmitt Bf 109E-3 3./JG 52
The comments you make there will appear in the posts below.

[Team Daedalus]

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - German

Description: Messerschmitt Bf 109E-3
by Design Team Daedalus


Unit: 6./JG 53 1940, France
Pilot: Oblt Heinz Bretnutz


To improve the performance of the Bf 109E, the last two real prototypes (V16 and V17) were constructed. These received some structural improvements and more powerful armament. Both were the basis of the Bf 109 E-3 version. The E-3 was armed with the two MG 17s above the engine and one MG FF cannon in each wing. Some units began receiving the E-3 by September 1939. A total of 1,276 E-3 were built, including 83 E-3a export versions.


There were many small differences between individual E-3s because the E-3 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc.


So each model we have created has its own unique features. This aircraft had no pilot head armor but was fitted with a rear view mirror on top of the windscreen frame.


Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

To check it out, rate it or add comments, visit Messerschmitt Bf 109E-3 6./JG 53
The comments you make there will appear in the posts below.

[Team Daedalus]

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - German

Description: Messerschmitt Bf 109E-3
by Design Team Daedalus


Unit: 8./JG 52 1940/41 Rumania
Pilot: unknown


To improve the performance of the Bf 109E, the last two real prototypes (V16 and V17) were constructed. These received some structural improvements and more powerful armament. Both were the basis of the Bf 109 E-3 version. The E-3 was armed with the two MG 17s above the engine and one MG FF cannon in each wing. Some units began recieving the E-3 by September 1939. A total of 1,276 E-3 were built, including 83 E-3a export versions.


There were many small differences between indivual E-3s because the E-3 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc.


So each model we have created has its own unique features. This aircraft was modified with flat plate and curved top pilot head armor, an armored glass windscreen and rear view mirror.


Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

To check it out, rate it or add comments, visit Messerschmitt Bf 109E-3 8./JG 52
The comments you make there will appear in the posts below.

[Team Daedalus]

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - German

Description: Messerschmitt Bf 109E-3/B
by Design Team Daedalus


Unit: 5./JG 77 May, 1941 Malaoi, Greece
Pilot: Unknown


To improve the performance of the Bf 109E, the last two real prototypes (V16 and V17) were constructed. These received some structural improvements and more powerful armament. Both were the basis of the Bf 109 E-3 version. The E-3 was armed with the two MG 17s above the engine and one MG FF cannon in each wing. Some units began receiving the E-3 by September 1939. A total of 1,276 E-3 were built, including 83 E-3a export versions.


The E-3/B was a small batch of E-3s that became the first operational Bf 109 fighter bomber, or Jagdbomber (usually abbreviated to Jabo). These were fitted with an ETC 500 bomb rack, carrying one 250 kg (550 lb) bomb.


There were many small differences between individual E-3s because the E-3 was often modified in the field by groundcrew and rear area repair depots. The production standard had no pilot armor. Mods included types of pilot head armor,E-4 type squared canopies, E-7 type pointed spinners, etc.


So each model we have created has its own unique features. This aircraft was modified with flat plate pilot head armor.


Pstrany is the primary model author with some small model refinement and additions by Captain Kurt as the model was collaborated on during development. Captain Kurt created the textures for each, the 2D instrument panel, the individual .dp files, air files and aircraft.cfg files.

To check it out, rate it or add comments, visit Messerschmitt Bf 109E-3/B 5./JG 77
The comments you make there will appear in the posts below.

[Rami]

Kurt,

Amazing job on these! I would have responded sooner, but the last couple of weeks at work have been crazy, and this is the first time I've been able to spend a few minutes here!

[1150]

Thank you Team Daedalus for these wonderful models!!!!

Love them !!

Thank you once again. Please keep up the great work.

Regards,
1150

[skylane]

Thank you very much for this nice collection of Bf-109s!

[Roxane-21]

Awesome!!! Thank you so much!!!

What's next ? E-4/E-7, or maybe F-2?

[Captain Kurt]

Here are the latest 109s

[stuart277]

Hi Team
Thanks for all your work on these great 109E's
Super
Cheers
Stuart

[UncleTgt]

Love the details.

Nice paint schemes too