Where can I find them?
Results 1 to 15 of 15

Thread: Where can I find them?

  1. #1

    Where can I find them?

    Hi all,

    I'm doing a new install of CFS2-WW1 with the Rickenbacker Flying Circus files. I also installed Zeebrugge, but when I start the game I get almost 40 messages of missing library files. To give you an idea:

    dead_trees, inf_gunemp_105mmempty, miltower, sbagwall, ww1_barbed_wire, bagwall, bruges_house_1lp/2lp/1, st-salvator_cathedral, rk_house 1,2,3,4,5,6,7,8,9,10,11, rk_restaurant, rk_church1/2/3, rk-bridge, rk-clocktower, rk-house-barn2 and a lot of railwayfiles with numbers, railway_buffers, railway_engine_workshops and a lot of u_boot_pens_flanders files(endwall, s3bay, etc.).

    Please be so kind to tell me if you know where I can find/download these scenery objects.

    Kind regards,

    hertzie.

  2. #2
    My guess...

    http://www.sim-outhouse.com/sohforum...d=280&id=27024

    Is there no clues in the readme(s)??

  3. #3

    Hertzie.......

    ....I don't have that loaded in my setup but have you looked at the Free Flight site and then under WW1 scenery ? There is a scenery section there titled for the Western Front. It might contain what you are looking for as , IIRC, that was a expansion coming out of the old Red Baron 2 game. They have made many improvements since that old great game.
    Just a thought.

  4. #4
    Library Staff
    Join Date
    Jan 2007
    Location
    Sydney, Australia
    Age
    68
    Posts
    1,504
    Hi Hertzie,

    If you download the WW1 Western Front scenery package by Westfront, the installation guide gives you hyperlinks to all the necessary scenery downloads. There's only about 70 of them.

    They are nearly all here at SOH. No Dice's site which was transferred to SOH has a number of required objects. MaskRider's and the Aerocrate site have the remainder.

    Good luck and let me know how you go.

    Kevin

  5. #5
    Hi Fibber, hi Kdriver, I googled what you mentioned, but I get the strangest websites I've seen in years, but not what I am looking for. So thanks for your help, but please be so kind to give me the necessary links to the websites I need.

    Regards,

    hertzie

  6. #6

    Hertzie.....

    ...for the link to the Free Flight site go to the main CFS2 forum page and look at the top. There you will find the link for that site .

  7. #7
    OK, went to the FreeFlight site, downloaded all I thought that could be useful, noticed that most of it I already had and installed. My "problem" is still the same, more than 35 objects missing. Found a solution: deleted Zeebrugge.

    hertzie

  8. #8
    Library Staff
    Join Date
    Jan 2007
    Location
    Sydney, Australia
    Age
    68
    Posts
    1,504
    Did you download the WW1 Western Front scenery package found here in the CFS2 Scenery section? The installation guide has all the needed links. Just click on them and Bob's your uncle.

  9. #9
    Yes, I did and installed everything and it doesn't help. And as I am not an English native speaker: what is a Bob's uncle?

  10. #10
    Library Staff
    Join Date
    Jan 2007
    Location
    Sydney, Australia
    Age
    68
    Posts
    1,504
    Hi Hertzie,

    It means you are right to go or it will work right.

    Looking at your list of missing objects, it appears you do not have Robert John's Mega GSL Railway Package, his Bruges Buildings, his WW1 Sub Pens and his WWI Trees Barbed Wire packages. In addition you need the RK_Dutch_Buildings_Library. The links are in the installation guide and the downloads are in the CFS2 Scenery Objects section.

    You also need No Dice's Viet Objects from his site which is now here at SOH. I've had other reports that the links to those objects don't always work, so I added an alternative hyperlink. If they don't work either please let me know.

    Good luck!

  11. #11
    Hi KDriver,

    Thanks for your info. Downloaded and installed what I missed, it makes Zeebrugge almost working now, I think I only miss the Vietnam scenery. I tried to find the NoDice files, but didn't succeed and I also didn't find your hyperlink, so be so kind to help me with that.

    Kind regards,

    hertzie

  12. #12
    Library Staff
    Join Date
    Jan 2007
    Location
    Sydney, Australia
    Age
    68
    Posts
    1,504
    Here is an extract from the WW1 Western Front Installation Guide:

    No Dice’s roads (Roads.zip)

    http://www.sim-outhouse.com/freeflight/Roads.zip
    See http://www.sim-outhouse.com/freeflight/Vietnam_Projects_2.html if above link does not work

    No Dice’s railroad tracks (Railroad-tracks.zip)
    http://www.sim-outhouse.com/freeflight/Railroad-tracks.zip
    See http://www.sim-outhouse.com/freeflight/Vietnam_Projects_2.html if above link does not work

    No Dice’s cranes (Viet_Port_Cranes.zip)
    http://www.sim-outhouse.com/freeflight/Viet_Port_Cranes.zip
    See http://www.sim-outhouse.com/freeflight/Vietnam_Projects_2.html if above link does not work

    No Dice’s US Viet objects (USObjects.zip)
    http://www.sim-outhouse.com/freeflight/USObjects.zip
    See http://www.sim-outhouse.com/freeflight/Vietnam_Projects_2.html if above link does not work

    No Dice’s Viet scenery objects (VietSceneobj1.zip)
    http://www.sim-outhouse.com/freeflight/VietSceneobj1.zip
    See http://www.sim-outhouse.com/freeflight/Vietnam_Projects_2.html if above link does not work

    No Dice’s & Jordan Moore’s Viet Animals (Viet_Animals.zip)
    http://www.sim-outhouse.com/freeflight/Viet_Animals.zip
    See http://www.sim-outhouse.com/freeflight/Vietnam_Projects_2.html if above link does not work

    James Elwood’s rail bridges (Rail_bridges.zip)

    http://www.sim-outhouse.com/freeflight/Rail_bridges.zip
    See http://www.sim-outhouse.com/freeflight/Vietnam_Projects_2.html if above link does not work

    James Elwood’s road bridges (Objlib04.zip)
    http://www.sim-outhouse.com/freeflight/Objlib04.zip
    See http://www.sim-outhouse.com/freeflight/Vietnam_Projects_2.html if above link does not work

    Al Simms’ bunkers (Als bunker lib.zip)
    http://www.sim-outhouse.com/freeflight/Als_bunker_lib.zip
    See http://www.sim-outhouse.com/freeflight/Vietnam_Projects_2.html if above link does not work

  13. #13
    Hurrayhurrayhurray!!!!! Only ONE file missing: inf_gunemp_105mmempty

    It's good that you do not know from the start where you will end......

    Thanks for your patience,

    hertzie

  14. #14
    Library Staff
    Join Date
    Jan 2007
    Location
    Sydney, Australia
    Age
    68
    Posts
    1,504
    Here you go hertzie:

    John (Blood_Hawk23) Fortin’s 105mm Gun Emplacements (Howitzer_Emplacements.zip)
    http://www.sim-outhouse.com/freeflight/Howitzer_Emplacements.zip
    See http://www.sim-outhouse.com/freeflight/Vietnam_Projects_2.html if above link does not work
    Note: You will only need the empty gun emplacement.

  15. #15
    SUPER!!!!!! Again a lot of fun flying CFS2

    hertzie

Members who have read this thread: 85

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •