B787 xh

**Seahawk72s** · March 7th, 2021, 15:09

A different group doing 787 FMC and system mods.

https://flightsim.to/file/8999/b78xhl

FMC
- VNAV
  - CLB Speed restriction
  - CLB Selected speed
  - CLB settable transition altitude
  - CLB FMC commanded speed is highlighted by magenta
  - Cruise Climb
  - Cruise Descent
  - Early descent (descent path calculation not supported now)
  - DES NOW (descent path calculation not supported now)
  - Climb leveling off
- LEGS
  - Cruise speed fix
  - DIRECT TO (basic)
- ROUTE
  - Airways support
ND/MFD
- ND symbols changed to default Boeing symbols
- Altitude Range Arc (ARA) [Green banana]
- TOD
- TOC
EICAS / SYS
- Gear synoptic page
- Hydraulic synoptic page
- Stat page
- FCTL synoptic page
- AIR synoptic page
SimRate manager
- Modes
  - slow down
  - pause
- Rate modes
  - off - do not change sim rate
  - linear - change sim rate to 4x and hold
  - normal - change sim rate to 4x / 2x and hold
  - aggressive - change sim rate to 8x (!!! Do not use this mode now !!!)
- Unpause button - unpause game when the game is paused by SimRate manager (This is the only way how to unpause the game)
- Emergency shutdown - Terminates all SimRate manager interventions immediately. During an emergency shutdown is not possible to use FMC for 6 seconds. You will be able to deactivate the emergency shutdown or leave the page without deactivation after 6 seconds.

**Seahawk72s** · March 12th, 2021, 18:20

Upgraded to 0.1.5 and folder name change.

https://flightsim.to/file/8999/b78xhl

Version 0.1.5 March 09, 2021

+ MFD is touchable on both sides
+ VNAV CLB ECON Climb speed value fix
+ VNAV CLB Speed transition should be highligted by magenta when FMC commands the speed
+ VNAV pages switches by flight phase
+ VNAV CRZ settable CRZ speed
+ VNAV CRZ speed highlighted by magenta
+ VNAV CRZ deleting selected CRZ speed by ECON prompt
+ VNAV page should switch automaticaly when flight phase change
+ VNAV CLB page titles
+ VNAV CRZ page titles
------------------------------------------------------------------------
B78XHL modification was renamed to B78XH because of upcoming updates.

Features Overview

FMC
- VNAV
  - CLB Speed restriction
  - CLB Selected speed
  - CLB Selected speed can be deleted by ECON prompt
  - CLB settable transition altitude
  - CLB FMC commanded speed is highlighted by magenta
  - CLB page title depends on commanded speed (ACT/MOD ECON CLB, ACT/MOD xxxKT CLB, ...)
  - CRZ settable selected speed
  - CRZ FMC commanded speed is highlighted by magenta
  - CRZ Selected speed can be deleted by ECON prompt
  - CRZ page title depends on commanded speed (ACT/MOD ECON CRZ, ACT/MOD xxxKT CRZ, ...)
  - Cruise Climb
  - Cruise Descent
  - Early descent (descent path calculation not supported now)
  - DES NOW (descent path calculation not supported now)
  - Climb leveling off
- LEGS
  - Cruise speed fix
  - DIRECT TO (basic)
- ROUTE
  - Airways support
ND/MFD
- MFD is touchable on both sides
- ND symbols changed to default Boeing symbols
- Altitude Range Arc (ARA) [Green banana]
- TOD
- TOC
EICAS / SYS
- Gear synoptic page
- Hydraulic synoptic page
- Stat page
- FCTL synoptic page
- AIR synoptic page
SimRate manager
- Modes
  - slow down
  - pause
- Rate modes
  - off - do not change sim rate
  - linear - change sim rate to 4x and hold
  - normal - change sim rate to 4x / 2x and hold
  - aggressive - change sim rate to 8x (!!! Do not use this mode now !!!)
- Unpause button - unpause game when the game is paused by SimRate manager (This is the only way how to unpause the game)
- Emergency shutdown - Terminates all SimRate manager interventions immediately. During an emergency shutdown is not possible to use FMC for 6 seconds. You will be able to deactivate the emergency shutdown or leave the page without deactivation after 6 seconds.

**Seahawk72s** · March 16th, 2021, 14:02

Two up grades since last post.

https://flightsim.to/file/8999/b78xhl

Version 0.1.7 March 15, 2021
+ FMC Page renderer extended
+ FMC THRUST LIMIT Page shows SEL/OAT as IRL
+ FMC THRUST LIMIT Page shows SEL/OAT "C" symbol in medium font size
+ FMC THRUST LIMIT Page SEL temperature value uses default 787 FMC design (shaded white)
+ FMC THRUST LIMIT Page shows TO N1, TO 1 N1 and TO 2 N1
+ FMC THRUST LIMIT Page <SEL> indicators fixed
+ FMC THRUST LIMIT Page thrust climb mode is <ARM> during take off automatically switch to <SEL> during climb phase
+ FMC THRUST LIMIT Page TO-B removed
+ FMC THRUST LIMIT Page fixed page separator
+ FMC APPROACH Page fixed flaps/speed copy
+ FMC APPROACH Page QNH LANDING changed to LANDING REF QFE←→QNH
+ FMC APPROACH Page Final uses format "IDENT RUNWAY" instead of "RUNWAY"
+ FMC APPROACH Page Runway lenght shows FT and M instead of M only
+ FMC APPROACH Page fixed page separator
+ FMC VNAV CLB Page fixed page separator
+ FMC VNAV CLB Page ECON switch page fix
+ FMC VNAV CLB Page "MOD" in title uses default 787 FMC design (shaded white)
+ FMC VNAV CLB Page SpeedRestriction highlight only speed
+ FMC VNAV CLB Page SpeedTransition highlight only speed
+ FMC VNAV CLB Page SpeedRestriction uses default 787 FMC design (shaded white + white/magenta text)
+ FMC VNAV CLB Page Transition altitude uses default 787 FMC design (shaded white + white/magenta text)
+ FMC VNAV CLB Page Cruise altitude uses default 787 FMC design (shaded white + white/magenta text)
+ FMC VNAV CLB Page Selected speed uses default 787 FMC design (shaded white + white/magenta text)
+ FMC VNAV CLB Page ECON Speed uses default 787 FMC design (shaded white + white/magenta text)
+ FMC VNAV CRZ Page fixed page separator
+ FMC VNAV CRZ Page ECON switch page fix
+ FMC VNAV CRZ Page "MOD" in title uses default 787 FMC design (shaded white)
+ FMC VNAV CRZ Page Cruise altitude uses default 787 FMC design (shaded white + white/magenta text)
+ FMC VNAV CRZ Page Selected speed uses default 787 FMC design (shaded white + white/magenta text)
+ FMC VNAV CRZ Page ECON Speed uses default 787 FMC design (shaded white + white/magenta text)
+ DESCENT constraints fix

Version 0.1.6 March 15, 2021
+ Basic descent path calculation
+ Basic early descent path calculation
+ Descent level off
+ MCP altitude intervention during descent
+ Descent fix
+ CRZ selected speed fixed
+ VNAV CLB Page refactored
+ VNAV CRZ Page refactored

**Seahawk72s** · March 30th, 2021, 14:03

A new upgrade.

https://flightsim.to/file/8999/b78xhl

Version 0.1.8 March 30, 2021

+ ND refactored
+ ND performance improved
+ ND waypoint symbols use less hacky implementation
+ ND Flight plan waypoint labels fixed (labels do not have white stroke anymore)
+ Airways improved
+ SimBrief configuration under Heavy menu
+ It is possible to request route on ROUTE Page if simbrief username/userid is set in configuration
+ LOADING Route from SB overrides (import) your CRZ altitude
+ LOADING Route from SB overrides (import) your Cost Index
+ Fixed problem with similar waypoint names in same airway (EGSIR, SIR)
+ Fixed problem with ICAOS which do not use XXXXX format in airways (LAM, SIR and so on)
+ SimBrief import progress page
+ SimBrief oceanic waypoints converter
+ SimBrief importer breaks to parts NATZ "pseudo" airway and insert waypoints as DIRECT
+ SimBrief importer automatically skip not found airways
+ SimBrief importer automatically skip not found waypoints
+ SimBrief importer automatically select desired waypoint from "DESIRED WAYPOINT page" if possible (based on lat and lon)
+ Basic custom waypoints data synchronization
+ Route page 2+ waypoints are grouped by airways
+ LEGS Page update hotfix
+ FMC lines colors and font size support extended

**scotth6** · April 1st, 2021, 02:48

Definitely have to check this out. Thanks. I love the 787 IRL, and the QW rendition is great in P3DV4. The MSFS default one looks amazing, but was definitely lacking some features, which of course is perfectly understandable for a default aircraft. Great to see so many community groups coming together to improve the default aircraft in MSFS.

**Seahawk72s** · July 22nd, 2021, 16:17

I missed this upgrade from the 14th.

https://flightsim.to/file/8999/b78xhl

Version 0.1.9 July 14, 2021

FPM changed
HOLDs support
Fuel burn increased
SimBrief importer supports payload and block
+ more than one hundred changes

Thread: B787 xh

Thread Tools

Display

B787 xh

B787XH v0.1.5

B78XH v0.1.7

B78XH v0.1.8

B78XH v0.1.9

Members who have read this thread: 0

Bookmarks

Bookmarks

Posting Permissions