Photo-real Panel for the DCC P-38F & G Lightnings!

**Captain Kurt** · July 2nd, 2020, 07:37

7/30/20/ VC panel gauges and placements update

This panel was developed from period P-38G cockpits photos and the USAAF official Pilot Training Manual for the P-38 Lightning, AAF manual 51-127-1. The panel painting and all panel development are mine. The gauges used are repainted and in some cases repurposed to match the actual gauges as installed in the P-38G.

The panel has four sub windows:

1) Throttle, mixture, prop, flaps and main switch panel. From this panel you can start and control engines separately replicating the real aircraft start procedure. It has a prop feathering / engine shut down feature for single engine flight.

2) Navigation and radio panel. It has a functional ADF radio and gauges and 3 period (non-authentic) GPS's for the ETO, MTO and PTO.

3) Control Yoke. This panel can be turned on or off to fly with or without the yoke.

4) Trim and auto pilot.

The panel includes the VC specifically for the DCC P-38G-13-LO CFS2 conversion.

It includes detailed instructions for how to operate the panel and an immersive P-38G operation instruction for how to start, fly and land the P-38G in the most realistic manner possible in CFS2

Link: http://www.sim-outhouse.com/sohforum...id=46&id=26649

**Captain Kurt** · July 2nd, 2020, 08:26

This is the final panel for the DCC P-38 series.

This panel was developed from period P-38F cockpits photos and the USAAF official Pilot Training Manual for the P-38 Lightning, AAF manual 51-127-1. The panel painting and all panel development are mine. The gauges used are repainted and in some cases repurposed to match the actual gauges as installed in the P-38F.

The panel has four sub windows:

1) Throttle, mixture, prop, flaps and main switch panel. From this panel you can start and control engines separately replicating the real aircraft start procedure. It has a prop feathering / engine shut down feature for single engine flight.

2) Navigation and radio panel. It has a functional ADF radio and gauges and 3 period (non-authentic) GPS's for the ETO, MTO and PTO.

3) Control Yoke. This panel can be turned on or off to fly with or without the yoke.

4) Trim and auto pilot.

The panel includes the VC specifically for the DCC P-38F-1-LO for CFS2.

It includes detailed instructions for how to operate the panel and an immersive P-38F operation instruction for how to start, fly and land the P-38F in the most realistic manner possible in CFS2

**Captain Kurt** · July 2nd, 2020, 08:33

A new entry has been added to Add-Ons Library, category CFS 2 Panels Add-Ons

Description: This panel was developed from period P-38F cockpits photos and the USAAF official Pilot Training Manual for the P-38 Lightning, AAF manual 51-127-1. The panel painting and all panel development are mine. The gauges used are repainted and in some cases repurposed to match the actual gauges as installed in the P-38F.

The panel has four sub windows:

1) Throttle, mixture, prop, flaps and main switch panel. From this panel you can start and control engines separately replicating the real aircraft start procedure. It has a prop feathering / engine shut down feature for single engine flight.

2) Navigation and radio panel. It has a functional ADF radio and gauges and 3 period (non-authentic) GPS's for the ETO, MTO and PTO.

3) Control Yoke. This panel can be turned on or off to fly with or without the yoke.

4) Trim and auto pilot.

The panel includes the VC specifically for the DCC P-38F-1-LO for CFS2.

It includes detailed instructions for how to operate the panel and an immersive P-38F operation instruction for how to start, fly and land the P-38F in the most realistic manner possible in CFS2.

To check it out, rate it or add comments, visit Photo-real Panel for the DCC P-38F-1-LO Lightning.zip
The comments you make there will appear in the posts below.