Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Ok, I noticed now that he opened a topic in FSX corner: http://www.sim-outhouse.com/sohforum...plite-released
So any news are they 64 bits conversion? As I remember, Nemeth had a specific startup and was coded 32bits only.
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Ok, I have reply, so I dont know why it is in FSX topic
Cant wait to test it, still not on Avsim yet.It's in P3DV4 native, no PBR unfortunately as gmax doesn't have that capability.
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
We have installer for P3Dv4! Nice and it works. VC definitely not for today's quality but its... FS2004 port as we know !
Not Ctrl+E heli as I remember, manual is necessarily, old good Nemeth fashion. Many thx euroastar350 for this!!!
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Btw. according one of Nemeth post they work on something new, on question about refreshed Mi-2 they repled "why not" ?
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
Could someone please post the link here, I can't find it in the avsim library, thanks a lot
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
No problem Mate! Enjoy!
btw. I have to read the manual about start-up, I dont remeber it. I remember that it was the one pdf done by user with screenshots step by step with whole procedures how to start Nemeth Mi-2. Cant find it now.
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
My knowledge of this helicopter is null but I love this aircraft, I have searched for a video on youtube to try to start it because it seems that CONTROL + E does not work for me, someone could tell me how I can start the engine, the checklist is ok but i don't understand the letter of the panels, thank you all very much for your help
My knowledge of this helicopter is null but I love this aircraft, I have searched for a video on youtube to try to start it because it seems that CONTROL + E does not work for me, someone could tell me how I can start the engine, the checklist is ok but i don't understand the letter of the panels, thank you all very much for your help
I found the attached quickstart instructions on a deep dark cavern on my old external HD. I can't take credit for these...I believe they came from the old Nemeth forum years ago. I assume these instructions will still work for the new FSX/P3D model, although I haven't had time to test yet. Good luck!
-Mark
I’ll check, Thanks Mark!
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
i found this on youtube
https://youtu.be/DNfDAESohhs
It works for me. Thx.
btw.
Ok, but I found a bug, I dont know, maybe its a problem of port or it was from beginning in Nemeth model also. Unfortunately causes that Mi-2 is unplayable for me.
From yesterday I noticed strange lag when I use Mi-2 and only this. Big FPS drop for 0,1 sec (like very short pause) but I fly VR only so its a huge problem. I was thinking something it was with my sim, checked again all option next 3 hours, every VR mode (single, stereo, motion reprojection ect) and I saw this lag still. Checked other my addons and worked very well, as it was before. So it's only with Mi-2. Finaly I stared convert all textures to DXT5, removing part to part in model and I found - this FPS lag is from Panel > Mi2 file (gauges). Something is wrong here in P3Dv4.5. It looks like short pause every few seconds ;( especially visible if you move your head quickly. It looks like I'm not flying, It's too bad! .
The best way would be isolate all BMP and XML from this CAB file and check globally, next isolate each file (from BMP groupe or XML) to find cause of this strange issue. Or maybe create CAB file by P3Dv4.5 SDK again enough?
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
I spent 2-3h to separate XML, BMP and checked where is this problem (removing files by name ect). Looks like one of XML problem, if all BMP was removed no this issue. Maybe its an double entry? I see that this package (CAB) wasnt touched for v4.5 I suppose.
Finally I gave up.
Webmaster of yoyosims.pl.
Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro
I am very sorry to read that you will not be able to enjoy this machine, I started with the contribution of the pdf of mgchrist5, and my flight did not last too long, (I have never simulated a helicopter pilot), but I really liked it, my computer skills do not allow me to help you , I'm sorry.
By the way how do you configure the throttles with fsuipc, I found the way of the rotor throttle, but I cannot correctly configure the rotary throttle of the lever, that is, I have configured the vertical movement of the lever but I cannot configure the throttle where the hand takes the lever thank you very much for helping me in all this
Bookmarks