Very Respectfully,
Jim 'Doc' Johnson, SMSgt, USAF (Ret)
Fac Fortia Et Patere
____________________________________________
Win 10 Pro 64 Bit, i7 6700K 4.0 GHz, ASUS MAXIMUS VIII IMPACT Z170 Mini ITX, G.SKILL TridentZ 16GB DDR4 4000, ASUS GeForce GTX 1080 8GB STRIX, P3D 4.5.12.30293
You got the Milviz Ju-87 Stuka to work in v5?
Would you mind elaborating on that?
Cheers,
Priller
No problem, I saw this on the Milviz general forum:
"It flies in P3D v4.5 but I donīt see the pilot 3D figure. Overall I would say it works fine (I never tried in earlier versions to be able to detect failures).
When you install it, as P3Dv4 is not detected, installer will extract files to a temp directory. In my case it was in F:\temp0. Just copy the content to Effects, Gauges and Airplanes. Donīt overwrite files as the ones already installed would be most likely newer than the ones in the Stuka. Alternatively you can use 7-Zip to unpack the exe directly.
Autostart is not working completely, and fuel pumps are not switched on, so a periodic engine start sound will be heard. Just do a cold and dark manual start instead or check that all systems are on after the autostart."
I used the installer: MilViz_Stuka_v3.170417.exe. I don't remember having to copy any files out of a temp directory. But installed it outside of the main Prepar3D v5 root. I didn't care if the crew was visible or not, but if I remember right there was a spot on the external model (view) between the pilot and back seater on the fuselage that I clicked out of curiosity (the mouse changed as I went over it) and both figures appeared.
Very Respectfully,
Jim 'Doc' Johnson, SMSgt, USAF (Ret)
Fac Fortia Et Patere
____________________________________________
Win 10 Pro 64 Bit, i7 6700K 4.0 GHz, ASUS MAXIMUS VIII IMPACT Z170 Mini ITX, G.SKILL TridentZ 16GB DDR4 4000, ASUS GeForce GTX 1080 8GB STRIX, P3D 4.5.12.30293
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
Flight Replicas Bf-109 K4
RealAir Spitfire IX
MJ C-47 PBR version.
FR Super Cub over Kiruna on a hazy Autumn afternoon.
"Illegitimum non carborundum".
Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
Intel Core i9 10980XE Extreme Edition X
ASUS ROG Rampage VI Extreme Encore MB
Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,
Gunnar van der Meeren
MSFS 2020 Standard/AMD Ryzen 9 5900X 3.7-4.8 GHz/Corsair Vengeance LPX DDR4 3200 MHz 64GB/Asus GeForce RTX 3090 TUF OC gaming GDDR6X 24GB
You need to have the original Spirit of St. Louis files from FS2004, plus the FSX-native converted files by Craig Richardson, attached.
amazing Lindbergh flew 33 hours to Paris without seeing where he was going..
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
Just another v5 test flight and everything working as it should.
Flight Replicas DC4 Carvair, the red haired stepchild of the DC4 fleet.
Good one Mike.
"Illegitimum non carborundum".
Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
Intel Core i9 10980XE Extreme Edition X
ASUS ROG Rampage VI Extreme Encore MB
Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
The Beverley (FSX/P3D) just added to the Library:
Something a little different. I just sat at Heathrow to watch Alpha India Group's beautiful AI. Unlike the stutter-fest and low fps of the past, this was totally smooth and pretty much capped at my limit of 30fps. Never thought I'd see the day. This is a whole new sim. Having said that, the GPU memory counter is your friend. It's a bit of a pig in that regard, but I'm sure LM is working on that.
Default Heathrow. I would like the Aerosoft payware addon, but maybe someday! NC
Btw, how can I get the screenshots to be larger in the post? I am saving them in bmp. What am I doing wrong?
First impressions.....highly impressive and just love the sounds.
"Illegitimum non carborundum".
Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
Intel Core i9 10980XE Extreme Edition X
ASUS ROG Rampage VI Extreme Encore MB
Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,
Bookmarks