Current System Specs :
FSXA & P3Dv4 | Windows 10 Professional for Workstations (x64)
Motherboard: Gigabit Z390 Aorus Ultra, LGA 1151, Intel based
CPU: Intel Core i9-9900K @ 3.60GHz | RAM: G.Skill Ripjaws V 16GB DDR4 3600
GPU: ZOTAC GeForce GTX 980 Ti AMP! Extreme (6GB GDDR5)
HD: 1TB SanDisk SSD Plus | PSU: KDM 750W ATX Power Supply
Where's VMFAT-101?
If a Marine pilot or RIO was in the Phantom, they went through '101.
I was attached to 101 for nearly 10 years, late 70's through early and mid-80's, and we had a lot of pilots and RIOs run through. As well, I was with VMFA-333 when they finally transitioned to the Hornet from the Phantom.
That's when I decided it was time to move on. A very sad loss, when the Phantom finally went away...
Still, some very nice paints!
Thanks for the memories...
Pat☺
Fly Free, always!
Sgt of Marines
USMC, 10 years proud service.
Inactive now...
More testing last night on the Fallon ranges and 2 things I'm working, pitch trim and drag chute. Similar to the thread on the T-37 trim, I've checked my settings and all is good in other models using the TM Warthog, but no pitch trim. For the chute, after nosewheel touchdown, in the VC moved the drag chute lever up to deploy and the aircraft stopped immediately on the runway.
Fly Navy/Army
USN SAR
DUSTOFF/ARMY PROPS
I’d still like to get this upgrade, especially in light of SWS’s kind offer of their older F-4.
Just wanted to see if the pitch trim had been sorted. I don’t want another Milviz type pitch control issue.
Thanks.
VF-154 was added in the PBR upgrade and doesn't exist for the original one. Matt made a couple more, I think VX-4 "Baby Blue" was one of them.
SimWorks Studios
Alex Vletsas
3D Modeler & Animator
http://www.simworksstudios.com
http://www.facebook.com/SimWorksStudios
Regarding pitch trim are you using an axis or hat? If using a hat switch, under controls, make sure that the "Repeat" slider next to your setting is in the middle. The chute problem has literally just been identified and we'll get to it.
Butch, APR-24 Phantoms is a naming convention we adopted. Phantoms that had the APR-24 RWR set didn't get the AFC218 update with the slotted stabilators, so flew different to newer Phantoms (late B/N). This is our way of saying "Phantom with RWR but early B model flight dynamics".
SimWorks Studios
Alex Vletsas
3D Modeler & Animator
http://www.simworksstudios.com
http://www.facebook.com/SimWorksStudios
Has anyone got the RFN carrier gauge to work with the F-4? I'm trying to land a B on the Victorious (which seems to have happened once in '65!) but the landing sight needs the gauge to work. For some reason when I swap standby and active frequencies nothing goes to the active frequency. I've tried matching a working aircraft's panel and aircraft cfg files but no joy.
Would any one out there that uses the PBR version of the SWS F-4 please post a picture of the VF-154 texture?
I am curious as to how the paint scheme looks.
Thanks in advance.
Alex - I recently bought the upgrade and there is no VF-154. Grateful if it could be posted here or somewhere to download. Shame the old repaints don't fit the new bird. Be great to replicate the extra repaint pack we had for the legacy aircraft.VF-154 was added in the PBR upgrade and doesn't exist for the original one. Matt made a couple more, I think VX-4 "Baby Blue" was one of them.
Thanks!
expat
Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.
I'm a bit late to the party regarding the Phantoms; I have given up on getting the Milviz F-4J/S to work so I have gone for the fantastic SWS B/N pack. First out from me are 2 N paints; VF-202 Superheats early 80s and VF-154 81-82-ish, both in early low vis schemes (prior to the TPS).
Best regards
Jens-Ole
Repainting since FS5..
I'm having a problem when attaching the SWS F-4N on the USS Coral Sea cat. The tires goes into the deck and no visible bridle. It is in 3.4. Any help is much appreciated!
Best regards
Jens-Ole
Repainting since FS5..
Same here - glad to see it's not just me! I press Shift +U and the nose gear extends but Shift + I fails every time to engage the bridle. Same issue with CV 43 and other aircraft. SWS say they are working on this.
Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.
Setting up the cat and bridle for FSX/P3D carriers should be something the addon makers know how do do. Even freeware ships have that feature.
The Midway/Coral Sea pack is judging from the details a work of passion and I hope we can get a timeline from the SWS team about when it will be fixed. Not much point with a super detailed carrier battle group if you cannot even get launched from the ship.
I did 4 traps last evening on the Coral Sea with the VF-154 N paint I'm working on and I must say that the visual of both the carrier and group is stunning! Outstanding work! I just hope we can get the cat working properly.
It would have been something to get an early 80s Coral Sea as well with F-4s, E-2Bs, A-6s, A-7s and RF-8! I know the carrier itself got some rework at this time with the new CIWS and radar systems, but it should not be to much change from the 70s model.
Back to the Phantom, I have not found any information with how to get the "gunsight" working. Any advice?
Best regards
Jens-Ole
Repainting since FS5..
BTW, testing with linking screenshots from Dropbox for higher res. It seems to work with some editing of the link code. How is this working with download bandwith vs my storage limit on dropbox etc? Just trying to find an alternative to photobucket and since I already have dropbox I thought I might give it a try.
Best regards
Jens-Ole
Repainting since FS5..
Any ideas why my PBR F-4 (with the most recent updates) look like this instead of how it look in others' screenies?
Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.
Jens, FWIW, I’ve had the same sunken wheel cat issues you have. For the longest time I had functionally given up on SWS products, but slowly the issues are getting sorted.
One of my pet peeves (as per my post about what I thought was a problem with AICarriers) is that launching Fleets and then going back to an AICarrier formation kills the cat function on all of the latter carriers until I exit the sim and come back.
The other, and more substantial-is that planes which come modelled with bridles and holdbacks lose these when attached to SWS cats. Makes no sense. Plus their position changes. The F-8 will sit “flat” - main gear 2’ off the deck instead of squatted properly on all three. At least I got it to trap and launch. So there’s that .
Jen, those low(er) vis schemes are a dream come true. I too have given up on the MV Phantom-a complete mess in P3D. So I’ve had to abandon all the great J/S later-period schemes I liked so much. The VF-154 is one I’ve longed to have back. Will this be for the regular model or the PBR model? And on the VF-202, is there a reason the IRST isn’t fully painted? By this period, I believe they usually were:
https://commons.m.wikimedia.org/wiki...ight_1983.jpeg
Anyway - I’m so thrilled for some later period paints. If you’re open doing to USMC J/S type schemes, that’d be a real treat!
Thanks for posting progress shots on these.
DL
Bookmarks