The favorite, huh....? For me, at times it can be flavor of the week......
.....and this weeks flavor tends to bite back....
The favorite, huh....? For me, at times it can be flavor of the week......
.....and this weeks flavor tends to bite back....
Alabeo Waco, A2a Cub making Heidi scream is always fun.
Twins the C47R and RA Duke B60 piston.
Ants Tiger moth an JF chippy gets lot of flight time.
For fun the Progressive Aerodyne Searay and the Magni M24.
i don't know what those are, but I have edited most of my GA to use LICChamp_dustrun.fx from the old FS9 Aeronca Champion, and that looks pretty good.where did you get the awesom dust effects
Rats - why won't anything work properly first time?
Taildragger Pilot
Keep on Flyin'
Ryzen 5 2600
RX 580 8GB DDR5 OC Armor
8 GB DDR4 2400
Dedicated SSD for Win10
Dedicated SSD for FSX:SE
That's FlySimWare's Cessna 120 pack. I'm playing around with repaints, some of them fictitious (see above) and some real world. It's a pretty old model and the fuselage is mapped to a single mirrored texture, so that precludes any paint schemes with lettering on the fuselage. That said....there are actually a lot of 120's out there that have their reg no's on the tail.
I'll make some for AH's new 140, ( about 12 years newer?) and then upload the mess of them all together.
Regarding the dust texture, I think it's Bill Lyon's "dustrun" effect. He packaged it with all his releases. I relabeled it to overwrite the default....hmmm.....I think ten or twelve years ago....?
And still not ready for P3D........
Here's one of the real ones. C-FSME lives in Quebec south of Montreal.
Yes, though I'm not sure if the prop needed to be fixed. I retired it for the CR-1 Aeronca. Do you want the dust or will you try an old Bill Lyons?I remember that, it works in FSX?
Rats - why won't anything work properly first time?
Taildragger Pilot
Keep on Flyin'
Ryzen 5 2600
RX 580 8GB DDR5 OC Armor
8 GB DDR4 2400
Dedicated SSD for Win10
Dedicated SSD for FSX:SE
Yes, clickable VC. The tail wheel is animated to steer, it's tied in with the rudder animation. Even if you set it up as free castoring in the flight model, the graphic model still shows the rudder & tail wheel moving together.
That said, steering was built into the 140's, and optional on the 120's.
This is an old model created right at the beginning of FSX. Flysimware has updated it repeatedly, like all their models. ( My great love for their Widgeon & Cornell renditions!!) But you gotta remember that this is a simple model with limitations compared to current offerings.
My attraction to it is the lack of the "D" window added later to so many 120's, and the fact that it is offered with a tundra tire variant. (Also the 1946-47 only rounded-relief panel....!)
To me, with a little paint "detailing", it becomes a nice companion to the Aeroplane Heaven Cessna 140. In fact, the FSW 120's work-a-day simplicity makes a reasonable contrast to AH's plush 140.
Very nice ship. I even saw it has a paint kit, and my very very early learning to repaint skills could help. I learned to fly in a '47 Cessna 120; N2099V. I'll see if I can get a pic of it. The tailwheel was 'linked' on the 120, but still was essentially an all toe breaks to stear kinda plane. The tailwheel would come 'unlinked' if you kicked it hard one way, and would freely castor.
Glad you knew exactly what I was asking and were able to provide a perfect answer.
Taildragger Pilot
Keep on Flyin'
Ryzen 5 2600
RX 580 8GB DDR5 OC Armor
8 GB DDR4 2400
Dedicated SSD for Win10
Dedicated SSD for FSX:SE
Realair Legacy v2 with dual Reality XP GTN 750's! (favorite addon of all time)
Untitled-4 by ryan b, on Flickr
A2A Bonazna
Untitled-1st by ryan b, on Flickr
A1R Yak-55M
Untitled-9 by ryan b, on Flickr
Baytower RV7/7A (seen here working in P3D v4.5)
RV7A_Rayfield by ryan b, on Flickr
FAA ZMP
PPL ASEL
| Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | EVGA GTX1080 Ti | 32GB 5600 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X |
I still miss the Saab Safir in P3D..
FX12639
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
One of my twin favorites is the Milviz Cessna 310R
Gunnar van der Meeren
MSFS 2020 Standard/AMD Ryzen 9 5900X 3.7-4.8 GHz/Corsair Vengeance LPX DDR4 3200 MHz 64GB/Asus GeForce RTX 3090 TUF OC gaming GDDR6X 24GB
Single engine GA favorite: Carenado Pilatus PC-12
GA Twins: Alabeo Cessna 421 Golden Eagle; Realair piston Duke v2; Carenado Piper Cheyenne III
Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.
Taildragger Pilot
Keep on Flyin'
Ryzen 5 2600
RX 580 8GB DDR5 OC Armor
8 GB DDR4 2400
Dedicated SSD for Win10
Dedicated SSD for FSX:SE
C421 frames are fine and it's big step up over the C340 which is now hangared.
Striker, listen, and you listen close: flying a plane is no different than riding a bicycle, just a lot harder to put baseball cards in the spokes.
Fav biplane
Fav business class...
Fav warbird!
"Time is God's way of keeping everything from happening at once"
Be yourself. Everyone else is already taken.
Still one of my favs. And it's an FS9 model!
(now, if only someone could convert this to FSX standards...)
A.
Bookmarks