Milviz releases a PC-6 Turbo Porter.
https://milviz.com/flight/products/PC6/
Russ
Milviz releases a PC-6 Turbo Porter.
https://milviz.com/flight/products/PC6/
Russ
Many may fly and some are rewarded
handsomely, but the wings of gold of a
United States Naval Aviator mean more
than flying. It is dearly bought, requires
sacrifice to keep and represents a way of life.
Thanks for the HU.
What a wonderful surprise.
I've been hoping that MilViz would take it on since the Aerosoft version fell flat.
For me an absolute must-buy.
P3D v4.5, DCS, AF2
W10 64bit Pro
Core i7 6770K @ 4,3 GHz
32 GB DDR4 2666
RTX 2080 Super 8 GB
Oculus Rift S
Cable 1000 Mbit/s
I would love to know if Milviz bought the model off Marcel Felde to finish...
That version was apparently ready 2 years ago...
Andrew Entwistle
Per Ardua ad Astra
Important: for a limited time there is a 20% discount: use the code "{Removed by request}" at checkout (note small case "u" in the middle) in the
Got Code space on the Payment Method selection screen.
Also: when you get the Sendowl download link, there is a serial code just under the plane's name. Copy and paste this someplace
secure, you will need it when you go to install (I missed it the first time around and had to go bak into my Milviz account downloads
to get it). This serial code is not in the e-mails with the download link Milviz sends.
-RobM
Bill Leaming
3d Modeler Max/GMax
C & XML Gauge Programmer
Military Visualizations
http://milviz.com
Intel® Core™ i7-3770k 4.2GHz - Crucial 16GB DDR3 - Dual Radeon HD770 1GB DDR5 (Crossfire) - Eco II Watercooling - Win7 64bit
Intel® Core™ i7-2600k 3.4GHz - Crucial 8GB DDR3 - NVIDIA EVGA GTX-770 SC 4GB - Win7 64bit
@Jankees, excellent!
@Bill, very nice models, I really like your work. But it seems, there are no reflections/gloss in PBR materials (or very, very poor). I am right, or do I have problems?
Thomas
Bill Leaming
3d Modeler Max/GMax
C & XML Gauge Programmer
Military Visualizations
http://milviz.com
Intel® Core™ i7-3770k 4.2GHz - Crucial 16GB DDR3 - Dual Radeon HD770 1GB DDR5 (Crossfire) - Eco II Watercooling - Win7 64bit
Intel® Core™ i7-2600k 3.4GHz - Crucial 8GB DDR3 - NVIDIA EVGA GTX-770 SC 4GB - Win7 64bit
Thank you Bill, I am quite sure, the PBR with a bit more reflections will come. Overall I have no issues noticed so far, well done. The Milviz Porter is quite impressive with its unique turbine management. A really nice to have.
Thomas
Is it just me....or does the elevator look in the wrong attitude when in straight and level flight...!?
To me it looks like it will nose overt all the time!?
Can anyone share how to map the throttles and prop using fsuipc. I am usually pretty good at this stuff but I can not get the full range out of the levers.
Thanks,
LouP
Looks good but not on my 'must have' list.
Or even my 'maybe' list.
"Illegitimum non carborundum".
Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
Intel Core i9 10980XE Extreme Edition X
ASUS ROG Rampage VI Extreme Encore MB
Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,
Bill Leaming
3d Modeler Max/GMax
C & XML Gauge Programmer
Military Visualizations
http://milviz.com
Intel® Core™ i7-3770k 4.2GHz - Crucial 16GB DDR3 - Dual Radeon HD770 1GB DDR5 (Crossfire) - Eco II Watercooling - Win7 64bit
Intel® Core™ i7-2600k 3.4GHz - Crucial 8GB DDR3 - NVIDIA EVGA GTX-770 SC 4GB - Win7 64bit
Glad to see some new liveries for the Porter , with this PBR setup the reflectivity is controlled using the Metal map's Alpha channel , not the Albedo Alpha .
Best CJ
@LouP
Can you calibrate your axis?
If not, check that you selected "axis (throttle, mixture, prop, aileron, elevator, rudder) set" and not only "throttle set" etc.
With my Saitek Quadrant set-up e.g. the throttle axis only gets to the yellow REVERSE range.
To enter REVERSE the switch which follows the lowest thottle lever position has to be activiated and by the Fsuipc Buttons+Switches menue set for Throttle Decr, plus activate Control to repeat... and also select Throttle Decr.
This set-up works perfectly for me (well, after some help by John Dowson).
Hope this is your solution.
Ernst
....And let's not forget the C-130J...
Man, if these hit all together, I'll be BANKRUPT (but happy)
Kent
I was hoping to upload this Australian Porter this weekend,
but I am having problems locating one part:
that little gizmo on the nose, does anybody know where to find it in the texture files???
and where is the landing gear?
Meanwhile, I started on a few more, but every little nut and bolt is modeled separately, so I am slowly going nuts...
so patience is needed, lots of it..
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
Bookmarks