FSX native AVRO Tutor

[UnknownGuest12]

No, there is no .fx extension for the effect names in the P3D aircraft.cfg files

Ok, no expert here, far from that...just noticed that no effect when starting engine on Avro planes(using P3DV4 only) and looking at effects folder
fx_engstrt.fx
fx_engstrt_cub.fx
fx_engstrt_DHC2.fx
fx_engstrt_fw190.fx
fx_engstrt_jenny.fx
fx_engstrt_ME109.fx

so, tried to change aircraft.cfg to fx_engstrt.fx and now I see some smoke, whatever the reason...wonder if P3D adds .fx at the very end because some planes have their specific engine start effect with the .fx at the end. Please enlight me. Much obliged.

[Javis]

Thanks a tremendous truckload again for bringing the cowlings Tutor to P3Dv4 now too, Nigel and Ulrich ! Also thanks a lot for making the needed corrections here and there, gentlemen ! Much appreciated !

A thread about Nigel's matchless masterpiece without screenies doesn't look right to me so please allow me to set that straight.

THANKS SO MUCH AGAIN, GENTLEMEN !!














Cheers,
Jan

[D5turbi]

Ok, no expert here, far from that...just noticed that no effect when starting engine on Avro planes(using P3DV4 only) and looking at effects folder
fx_engstrt.fx
fx_engstrt_cub.fx
fx_engstrt_DHC2.fx
fx_engstrt_fw190.fx
fx_engstrt_jenny.fx
fx_engstrt_ME109.fx

so, tried to change aircraft.cfg to fx_engstrt.fx and now I see some smoke, whatever the reason...wonder if P3D adds .fx at the very end because some planes have their specific engine start effect with the .fx at the end. Please enlight me. Much obliged.

Hi Beaufighter,

The effects in the "Effects" folder do have an .fx extension.
But, in the files "aircraft.cfg", do not add it to the name of the effect.
An example, the aircraft.cfg file of the F-22 of the default P3D v4.4 flight:

[EFFECTS]
wake = fx_wake
water = fx_spray
dirt = fx_tchdrt
concrete = fx_sparks
touchdown = fx_tchdwn_m, 1
EngineFire = fx_engfire_f18

However, these files have the extension .fx in the "Effects" folder of P3D.

Best regards
Jean

[Postbaer61]

Hello Ulrich and Nigel,

In the list of errors detected by P3D, I failed to report the absence of the file GLASS_S.dds.
I copied it from other planes that owned it

Best regards

Jean

Thanks again, Jean,
I have deleted the additionel
textures glass_s.dds and the Canopy_Fresnel_Ramp.dds
in all models, so they are no more nessesary.
The with default comming textures are only now in use.
Last model update 24.01.2019 / 1 p.m.

Best regards
Ulrich

[Postbaer61]

Thanks a tremendous truckload again for bringing the cowlings Tutor to P3Dv4 now too, Nigel and Ulrich ! Also thanks a lot for making the needed corrections here and there, gentlemen ! Much appreciated !

A thread about Nigel's matchless masterpiece without screenies doesn't look right to me so please allow me to set that straight.

THANKS SO MUCH AGAIN, GENTLEMEN !!

Cheers,
Jan

Thanks YOU for this marvelous screenies, Jan
Really masterpieces !!

Cheers
Ulrich

[Twice43]

Thanks again, Jean,
I have deleted the additionel
textures glass_s.dds and the Canopy_Fresnel_Ramp.dds
in all models, so they are no more nessesary.
The with default comming textures are only now in use.
Last model update 24.01.2019 / 1 p.m.

Best regards
Ulrich

Ulrich
I have been waiting as the tweaks filter through & should now download the latest & greatest - where can I find it?
& again, thanks for all your work on this.
T43

[Postbaer61]

Ulrich
I have been waiting as the tweaks filter through & should now download the latest & greatest - where can I find it?
& again, thanks for all your work on this.
T43

Hello T43,
Look in post #1
The download link stays always the same.
Only the content gets updated.

Cheers
Ulrich

[D5turbi]

Hello T43,
Look in post #1
The download link stays always the same.
Only the content gets updated.

Cheers
Ulrich

Hello Ulrich,

For P3D v4 what are the files to download?
The first two (conversions) or the next two (new models)?

Best regards

Jean

[Postbaer61]

Hello Ulrich,

For P3D v4 what are the files to download?
The first two (conversions) or the next two (new models)?

Best regards

Jean

Hi Jean,

All four files can be used in P3Dv4+.

There are no separate versions for FSX or P3Dv4,
they are all FSX natives with xml gauges.

All converted model versions will work in FSX and P3D 1-4+ .

-----------------------------------------------------------------
Part 1 is the the FSX native AVRO Tutor port over model
Part 2 is the needed texture pack for AVRO Tutor port over model
----------------------------------------------------------------
Part 3 is the FSX native AVRO 621 port over model
-----------------------------------------------------------------
Part 4 is the FSX native AVRO 621 Trainer port over model

Best regards
Ulrich

[D5turbi]

Many thanks.

It's a plane very easy to fly.
More easy than my old Druine D5 turbi.


Best Regards
Jean

[nigel richards]

Thanks a tremendous truckload again for bringing the cowlings Tutor to P3Dv4 now too, Nigel and Ulrich ! Also thanks a lot for making the needed corrections here and there, gentlemen ! Much appreciated !

A thread about Nigel's matchless masterpiece without screenies doesn't look right to me so please allow me to set that straight.

THANKS SO MUCH AGAIN, GENTLEMEN !!














Cheers,
Jan

AWESOME screenies, Jan :-)
Greatly appreciate your sharing with us.

[nigel richards]

Many thanks.

It's a plane very easy to fly.
More easy than my old Druine D5 turbi.


Best Regards
Jean

Now that Sir, is one stunning looking aircraft!!!

Thanks for sharing, Jean

[Twice43]

Hello T43,
Look in post #1
The download link stays always the same.
Only the content gets updated.

Cheers
Ulrich

Thanks Ulrich
A few out at sea at dusk, before I update the Tutor.
T43

[mpni]

Hi all
If you want using the mini panel and if you cannot see it, try this in the panel config file :

[Window04]
Background_color=0,0,0
size_mm=828,150
position=7
visible=1
ident=15555

gauge00=NR_621!AVRO_621_altimeter, 9,11,120,130
gauge01=NR_621!AVRO_621_ASI, 141,11,120,120
gauge02=NR_621!turn_slip, 288,11,120,120
gauge03=NR_621!AVRO_compass, 433,3,120,140
gauge04=NR_621!inclinometer_621, 569,10,120,120
gauge05=NR_621!AVRO_621_rpm, 705,10,130,140

[Postbaer61]

Hi all
If you want using the mini panel and if you cannot see it, try this in the panel config file :

[Window04]
Background_color=0,0,0
size_mm=828,150
position=7
visible=1
ident=15555

gauge00=NR_621!AVRO_621_altimeter, 9,11,120,130
gauge01=NR_621!AVRO_621_ASI, 141,11,120,120
gauge02=NR_621!turn_slip, 288,11,120,120
gauge03=NR_621!AVRO_compass, 433,3,120,140
gauge04=NR_621!inclinometer_621, 569,10,120,120
gauge05=NR_621!AVRO_621_rpm, 705,10,130,140

Hi mpni,
That works like a charm.
I have changed the panel.cfg accordingly with the last update.
Thanks a lot.

Ulrich

[Postbaer61]

FYI
I have just updated the download files.

Last update 27.01.2019 00.15 or 0.15 a.m.

I hope to have corrected all minor bugs now.

And for the statistic

The current downloads in numbers for the FSX natives

FSX_native_AVRO_621_port_over = 527
FSX_native_AVRO_621_Trainer_port_over = 488
FSX_native_AVRO_Tutor_port_over_Part1 = 290
FSX_native_AVRO_Tutor_port_over_Part2 = 245

Cheers
Ulrich

[cavaricooper]

Wunderbar!

Danke- C

[mpni]

Hi
I donwload the four files and install them after deleted the old folders.
These are the last small remarks because all work fine in the 3 aircrafts.

Avro 621
OK

Avro 621 trainer
aircraft.cfg line 468, InitialZoom = -0.3 must be InitialZoom = 0.3

Avro Tutor
If you want to see the compas in 2D windows by clicking on it in the virtual cockpit, (as you can do it in the Avro 621 or Trainer), add this line in the Panel.cfg [Window03]
gauge00=NR_621!AVRO_compass, 0,0,284,286

Thank you very much to Ulrich and Nigel for these beautifull airplanes, must to have.

Michel

[Postbaer61]

Hi Michel,

Trainer and Tutor are updated

Thanks

Ulrich

[mpni]

Many thanks Ulrich
I am sure that your next creation will be as beautiful as this AVRO. (Perhaps an aircraft with a hook).
Good continuation for our pleasure.
Michel

[Postbaer61]

Many thanks Ulrich
I am sure that your next creation will be as beautiful as this AVRO. (Perhaps an aircraft with a hook).
Good continuation for our pleasure.
Michel

Oh no, Michel ,there is a misunderstood

That is not my wonderful creation.
Nigel Richards and Team has created this beauty

Model Designer: Nigel Richards
Textures: Nigel Richards
Flight Model Design: James Banks, Milton Shupe, Pete Collis, Keith Paine
Gauges: Roman Stoviak, Nigel Richards, Keith Paine, Microsoft
Sounds: Nigel Richards
Special Effects/Gauges: Roman Stoviak

My humble part was only, to convert this FS9 model to an FSX native format, nothing more.
All credit goes to Nigel and Team.

Ulrich

[mpni]

Hi Ulrich
Thank you to Nigel and to the team.
But converting a FS9 model to an FSX native format is also a big job, especially if it also goes perfectly under P3Dv4.
Good continuation in that way.
Michel

[cavaricooper]

I just HAD to take the Tutor to St. Barts... and in doing so I found that she slows down incredibly well. After a couple of circuits and bumps, I thought it was time to stop for tea. She's not slow until the slots (slats) pop out and even then with a hand on the throttle and ready feet on the rudder bar, she's a thoroughbred. Does it look like I had a good time?

[cavaricooper]

The CORRECT ANSWER is YES

Ta- Nigel & Ulrich!

C

[Postbaer61]

Ha, that's exactly what i did yesterday.
I've checked the new published St Barth 1.1 scenery
with the AVRO and had a lot of fun.
Two heads one thought.