Does anybody know of any tutorials that cover creating a 4 engine sound.cfg from a single engine config that uses the same engine type?
Ive looked through the forum but have been unable to find anything
Thanks in advance
Does anybody know of any tutorials that cover creating a 4 engine sound.cfg from a single engine config that uses the same engine type?
Ive looked through the forum but have been unable to find anything
Thanks in advance
Manny
Glad to be back - Now if I can just remember how to fly this damned thing........
I cant offer any such tut, but it is about clone and rename action in the current cfg file. I did that way a soundset for propeller and jet four engined airplanes. See at http://simhangar.nolimit.cz for Me 264 or Horten XVIII. There are links to SOH threads and download.
EDIT: a link to the downloadable sample of the Me 246 4-engined propeller sound config, derived from stock Ju-88, below. you can compare it with the dafult 2-engined Ju-88 source.
http://www.sim-outhouse.com/sohforum...=1#post1065731
notes: the Horten use 2x 2-engined config base:
[SOUND_ENGINE]
number_of_engines=4
eng1_combustion=COMBUSTION.1.00
eng2_combustion=COMBUSTION.2.00
eng3_combustion=COMBUSTION.1.00
eng4_combustion=COMBUSTION.2.00
eng1_jet_whine=JET_WHINE.1.00
eng2_jet_whine=JET_WHINE.2.00
eng3_jet_whine=JET_WHINE.1.00
eng4_jet_whine=JET_WHINE.2.00
eng1_starter=starterA
eng2_starter=starterB
eng3_starter=starterA
eng4_starter=starterB
eng1_shutdown=shutdownA
eng2_shutdown=shutdownB
eng3_shutdown=shutdownA
eng4_shutdown=shutdownB
eng1_combustion_start=combstartA
eng2_combustion_start=combstartB
eng3_combustion_start=combstartA
eng4_combustion_start=combstartB
the Me 264 use a regular 4 engined config base:
[SOUND_ENGINE]
number_of_engines=4
eng1_combustion=COMBUSTION.1.00
eng2_combustion=COMBUSTION.2.00
eng3_combustion=COMBUSTION.3.00
eng4_combustion=COMBUSTION.4.00
eng1_non_combustion=NON_COMBUSTION.1.00
eng2_non_combustion=NON_COMBUSTION.2.00
eng3_non_combustion=NON_COMBUSTION.3.00
eng4_non_combustion=NON_COMBUSTION.4.00
eng1_prop=PROP.1.00
eng2_prop=PROP.2.00
eng3_prop=PROP.3.00
eng4_prop=PROP.4.00
eng1_starter=starterA
eng2_starter=starterB
eng3_starter=starterC
eng4_starter=starterD
eng1_shutdown=shutdownA
eng2_shutdown=shutdownB
eng3_shutdown=shutdownC
eng4_shutdown=shutdownD
eng1_combustion_start=combstartA
eng2_combustion_start=combstartB
eng3_combustion_start=combstartC
eng4_combustion_start=combstartD
... still in the end you can hear 1-2-3-4 engine startup sequence on both solutions
Last edited by BorekS; September 2nd, 2018 at 07:54.
Thanks for the info mate.
Looking back through some old cd's I found this document not sure where it came from originally, excuse the formatting
Manny
Glad to be back - Now if I can just remember how to fly this damned thing........
thank you, such tut can be really handy!
however, as I can confirm from my own experience, all what you would need to make from some two engined soundset the four engined config, is to clone a few of the original text rows and wav file names (if ever) from the 2 stage to the 4 stage.
Bookmarks