Air Zermatt Heliports Gampel and Raron
Results 1 to 12 of 12

Thread: Air Zermatt Heliports Gampel and Raron

  1. #1

    Air Zermatt Heliports Gampel and Raron

    I just did the upload for a little scenery addon i did in last weeks. This will show the Air Zermatt Heliports Gampel and Raron (also some little changes to Helibase Zermatt) in Switzerland.
    Did three different versions, so you can choose between a version just for FSX, a version for FSX with addon LamaX and a version for SwitzerlandX.
    Also did another modification to the ND EC-135 helicopter so it is now the one that Air Zermatt uses.

    Yust some little pictures of this addon.


    Real Helibase Gampel



    and the one from FSX




    The ND EC-135 Air Zermatt original



    and the version for FSX


    Greetings
    Klaus

  2. #2
    And Raron Heliport







    Changes to LamaX Addon Helibase Zermatt (added helicopter and a little live)

  3. #3
    and a starting point near the Matterhorn with some rescue scenery









    Hope you will like this little addon and just have fun with it.

    Greetings
    Klaus

  4. #4
    Thank you for this Klaus. I became frustrated to the point that rather than continuing to beat my head against the wall trying to get the elevation correct for Zermatt I purchased LamaX. . . .and discovered that they did what I had thought about doing.. .build my own mesh object to fit into the scenery for Zermatt-Air, lol. Oh well!

    I have been enjoying the flights between Zematt, Raron, Sion and I even added the Hospital at Visp to drop off patients before following the valley back to Zermatt. All I'm waiting on now is George's rendition of the Bell 429 to complete my available Heli's at Zermatt.
    Last edited by falcon409; August 10th, 2018 at 09:54.
    USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
    My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d

    Current System Specs:
    FSX/Accel | Windows10 64bit
    Motherboard: MSI760GM-E51(MS-7596)
    CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
    GPU: NVidia GTX 970 (4GB GDDR5)

  5. #5
    Klaus,

    Thanks for doing this scenery. Recently I watched the rescue Air Zermatt show on Netflix. It was a very good show and I was sad to see they only filmed one season. This scenery is going to be lot's of fun flying around the Matterhorn. Where can I get your scenery and what other scenery will I need. Last question... where do I get that helicopter? Thanks.

  6. #6
    Quote Originally Posted by mal998 View Post
    Klaus,
    Thanks for doing this scenery. Recently I watched the rescue Air Zermatt show on Netflix. It was a very good show and I was sad to see they only filmed one season. This scenery is going to be lot's of fun flying around the Matterhorn. Where can I get your scenery and what other scenery will I need. Last question... where do I get that helicopter? Thanks.
    I'm hoping they continue the series but that must also be a headache for all involved. . .carrying out rescue missions with a full camera crew tagging along. The series "Ice Pilots" was similar. . .those folks didn't like the camera crews but they tolerated them. . .they were glad to be rid of them.

    Anyway, the helicopter is a Nemeth Design payware chopper. Not sure if there is a freeware version anywhere. . .maybe someone else can comment on that. Klaus' scenery should be up on the SOH downloads area sometime today. I purchased a payware title (LamaX) which has several Air-Zermatt Heliports including their main one in Zermatt that's featured in the show. I did an adjustment to the hangar and Office next to the hangar at Zermatt because the name on the hangar and office was incorrect. They still showed "Tom Taylor" on the windows and the building and as you remember from the series, it says AIR ZERMATT.
    USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
    My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d

    Current System Specs:
    FSX/Accel | Windows10 64bit
    Motherboard: MSI760GM-E51(MS-7596)
    CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
    GPU: NVidia GTX 970 (4GB GDDR5)

  7. #7
    Quote Originally Posted by mal998 View Post
    Klaus,

    Thanks for doing this scenery. Recently I watched the rescue Air Zermatt show on Netflix. It was a very good show and I was sad to see they only filmed one season. This scenery is going to be lot's of fun flying around the Matterhorn. Where can I get your scenery and what other scenery will I need. Last question... where do I get that helicopter? Thanks.
    See series on line for free:

    https://www.redbull.com/int-en/tv/sh...utubeDLTheHorn

  8. #8
    Quote Originally Posted by mal998 View Post
    Klaus,

    Thanks for doing this scenery. Recently I watched the rescue Air Zermatt show on Netflix. It was a very good show and I was sad to see they only filmed one season. This scenery is going to be lot's of fun flying around the Matterhorn. Where can I get your scenery and what other scenery will I need. Last question... where do I get that helicopter? Thanks.
    There are three versions inside this upload. One is for FSX without any addon. One is for FSX with Addon LamaX and another version is for users with Addon SwitzerlandX (you can use it also together with LamaX and SwitzerlandX in combination) if you use the LamaX addon then you must decide if you will use the Base Raron from LamaX or you will use my version from Raron Helibase. The way to do this is written in the readme of this download.

    If you did not get the addon LamaX then you can download a freeware version of Helibase Zermatt from this link : http://www.vf-air.com/FSX2.htm

    The helicopter is a Nemeth Designe EC-135 payware addon. I did some modifications to this one, so it now looks like the origninal used by Air Zermatt.

    And a very nice freeware EC-135 you will find here : http://www.fsx-info.de/der-eurocopte...-thomas-roehl/

    Greetings
    Klaus

  9. #9
    The link for the EC-135 doesn't work. I get a second page saying the website isn't available.
    USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
    My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d

    Current System Specs:
    FSX/Accel | Windows10 64bit
    Motherboard: MSI760GM-E51(MS-7596)
    CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
    GPU: NVidia GTX 970 (4GB GDDR5)

  10. #10
    Quote Originally Posted by falcon409 View Post
    The link for the EC-135 doesn't work. I get a second page saying the website isn't available.


    Found another one for the same helicopter : https://flyawaysimulation.com/downloads/files/5675/fsx-eurocopter-ec-135/

    And here you will find this one too : http://www.hovercontrol.com/cgi-bin/...35&bool=phrase

    HS_Design_EC135_X

    Greetings
    Klaus

  11. #11
    I remember this now. . .I thought the "HS" name sounded familiar. I downloaded this package with the intent of having a single helicopter to fly and was bombarded with 50 models and 18 interior variants. By the time I was finished I deleted the entire package and went on to a different helicopter. Trying to figure out what interior went with the one model I wanted was overwhelming and not worth messing with.

    I'll give this another shot, but out of those 50. . .only 1 will remain if I survive the task without trashing everything again. Thanks for the new links!

    UPDATE: Yep, as expected. . .I don't have the patience to mess with it. . .gone!
    Last edited by falcon409; August 11th, 2018 at 04:22.
    USAF Retired, 301st Fighter Wing, Carswell AFB, Texas
    My SOH Uploads: http://www.sim-outhouse.com/sohforum...erid=83&sort=d

    Current System Specs:
    FSX/Accel | Windows10 64bit
    Motherboard: MSI760GM-E51(MS-7596)
    CPU: 3.9GHz AMD FX-4300 Quad-Core | RAM: 16GB DDR3 1333
    GPU: NVidia GTX 970 (4GB GDDR5)

  12. #12
    Quote Originally Posted by klnowak View Post
    There are three versions inside this upload. One is for FSX without any addon. One is for FSX with Addon LamaX and another version is for users with Addon SwitzerlandX (you can use it also together with LamaX and SwitzerlandX in combination) if you use the LamaX addon then you must decide if you will use the Base Raron from LamaX or you will use my version from Raron Helibase. The way to do this is written in the readme of this download....
    Looking forward to new scenery and repaint, thanks..!

Members who have read this thread: 3

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •